Skip to main content
AmigoFish

HAUS PLANS ®️

HAUS PLANS ®️Video

Format:
YouTube channel
New videos:
Several times a week
Typical length:
about 1 minute
Latest video:
Not rated yet

About this show

Construction Content General Contractor 20+ Years Collab: info@hausplans.com https://creators.homedepot.com/mypage/hausplans

Videos come from the channel's public YouTube feed. The artwork is the newest video thumbnail. Last updated . Names, artwork and text belong to their publishers.

Cosmos

Similar by topic and creator

See the full Cosmos

Videos

  • Making Construction Ice Cream on the Jobsite

    · 1 min

    We just built ice cream on the jobsite using paint cans and a cement mixer, and all three flavors were construction inspired. Up first, “Overweight Operator”- the only thing this guy likes more than excavation is sugar. The only thing this guy likes more than excavation is sugar. We dumped in ½ a bottle of Yoohoo, Whoppers, a King Size Kit Kat, and 10 pumps of fudge from a grease gun. Next up, “Gas Station Lunch”, let’s see what we got from the Gas Station. A bag of Sour Patch Kids, some Takis, two packs of candy cigarettes, and finally a splash of Orange Rock Star. And last, “Subfloor Swirl”, we vacuumed up peanut M&Ms, Biscoff cookies, and Pretzels left behind by the framers. You’re not going to believe how these turned out. We put the cans in the mixer, added 200 pounds of ice and shoveled in some rock salt. After about an hour in the mixer- this ice cream was done! All three flavors turned out amazing, my favorite was “Overweight Operator”. We need your help- what construction flavors should we make next?@hausplans #construction #howto #icecream #cooking #contractor

    Not rated yet
  • How To Form a Concrete Porch Like a Pro

    · 1 min

    I’m gonna teach you how to form up a concrete porch like a pro. Always use three-quarter inch plywood for your form boards because it’s strong. Set your saw blade depth just below the plywood for the cleanest cut. I actually cut this piece a little crooked, so I’m flipping the factory edge up. I fasten the left side of the plywood to the house framing with T25 deck screws. Then I use masonry screws along the bottom, about one every two feet — these things work awesome. Look how tight it draws the board against the foundation. For the right side, I cut a small 2x6 block and screw it to the garage wall framing. I check that everything’s plumb, then screw the form board to the block from the inside. I attach a 2x6 flat along the top - this helps to keeps the plywood straight and reinforces it. Concrete is super heavy and we don’t want these form boards flexing at all. Finally, I fill any small gaps with foam. We’re adding stone and a rebar grid next - follow along so you don’t miss it. @hausplans #build #howto #construction #diy #contractor

    Not rated yet
  • Your Concrete Is a Sponge - Seal It or Replace It

    · 1 min

    Most homeowners have no idea; concrete doesn’t last unless you keep it sealed. And this 20-minute job can save you thousands of dollars. Concrete might look solid, but it’s actually more like a sponge. It soaks everything up: oil, mud, stains, but the real killers are salt and water. If you’re in a cold climate it can soak in, freeze, and pop the surface right off your slab. This is called spalling and once it happens there’s no easy way to fix it. A sealer is the best way to prevent this. I prefer a solvent based sealer over water based; it soaks in deeper, bonds harder, and gives the slab a wet look. Water sealers are easier to clean up, but for something like this garage that’s going to have hot tires and salt on it- a solvent based sealer is the way to go. Here you can see the garage a few days later. There’s gonna be two ten-foot garage doors on the front, and an eight-foot door on the side for a small tractor. Now, I ended putting two coats on this floor, and so far, it’s holding up really well. And here’s the best part- the empty bucket makes a great trash can. @hausplans #build #howto #homeimprovement #concrete #sealer #construction #hack

    Not rated yet
  • The Government Won’t Let Anyone Move In Until We Pass This Test

    · 1 min

    The government won’t let anyone live in this house, before we can get a certificate of occupancy this house has to pass something called a blower door test. They depressurize the entire house and measure how much air leaks in. Fail the test and no one moves in. I’m going to show you how to seal up one of the biggest leak points on any house- the joints where the wood framing meets the concrete foundation. I’m using ZIP Liquid Flash. I start by placing a bead directly in the crack then I use a putty knife to spread it out. I want it about 12 Mils thick, or an easy way to look at it- thick enough that you can’t see through it. Using the duct tape on the foundation just makes for a cleaner job- plus it’s fun to peel off. Now the framers aren’t perfect and sometimes their nail guns miss the studs. I’m using Liquid Flash to plug these holes; I just put a dab over each hole and then spread it out with a squeegee. Also, sometimes the nails get driven in too deep by the nail gun. Huber says these nails should also be filled. So, here’s the question: I like a good tight house that won’t leak, but are we starting to make them too airtight? @hausplans #build #howto #construction #diy #contractor #ZIP #liquidflash #airtight

    Not rated yet
  • How to Strip Concrete Forms Like a Pro

    · 1 min

    It’s been less than 24 hours since we poured this garage floor- now it’s time to strip off the forms. I’m going to show you how strip forms like a pro. Every now and then there’s a T25 screw that stays in the board- just turn the board upside down, give it a few taps with the hammer and it’ll back right out. I used Tapcons to attach these 2x10s to the foundation, but sometimes you’ll get one that’s stripped. I like to take the bit out of the driver, line it up with the head, and give it a few taps with the hammer; then I reconnect the driver. Now it will back right out. This happens because they were sunk too deep or the wood swelled up. Often when you first remove the forms, you’ll have sharp edges. I take my hammer and scrape the edge, this will clean it up. When a form board’s really tight- I tap it gently with my hammer. This loosens it up. Also never pry against the concrete when it’s green- you could easily take out a chunk. Call me cheap, but these days I’m saving the screws. I might not use them for something permanent, but they’re great for form work. These boards on the other hand are headed to the dumpster. @hausplans #build #howto #construction #diy #contractor

    Not rated yet
  • I HAD to Pour This Garage Slab Today

    · 1 min

    We went from this…to this, in less than 6 hours. My back was against the wall. I had to get this garage slab poured today. The framers are ready to set roof trusses on this house, and they can’t set the trusses until the garage is framed; so they needed this slab poured pronto. Thankfully the concrete guys showed up bright and early and hit it hard. Even The New Guy showed up on time today wearing his brand new concrete boots. Now here’s the thing, this job is in the middle of nowhere and we wouldn’t have had time to order a finish-up truck. So I had to very carefully calculate how much concrete we needed. Because this garage slopes from back to front and it has grade beams it was difficult to calculate. Thankfully we only had a yard left over. I would way rather pay for an extra yard of concrete than have a disaster. Now with the full sun and hot temperatures it didn’t take long for the concrete to set up. We actually snapped lines and cut it the same day. Hopefully when this floor cracks it will crack in the cuts. Finally, we sprayed it with water to cool it down. @hausplans #build #howto #concrete #garage #construction #diy #contractor

    Not rated yet
  • Frying Donuts in an Excavator Bucket #sponsored @5hourenergyshot

    · 59 sec

    I just messed up- we’re making donuts and I forgot the holes. Actually, we attempted to make Boston Cream and Jelly Filled donuts on the jobsite. For donuts you want the dough to be about a ½” thick. Once they were rolled and cut out we let them sit for an hour for the yeast to rise. For the fillings we used 5-hour ENERGY’s new donut flavors- they actually taste like real donuts. Boston Cream Donut in one, Jelly Donut in the other- this one’s raspberry flavored. @5ho@5hourenergyshotonsored To fry the donuts, we used the bucket on the excavator. I dumped in 6 gallons of oil and used a propane torch to heat it up. We let the donuts fry for 3 minutes and flipped them over and let them fry for another 3 minutes. Next, we put the Boston Cream and Raspberry Jelly into caulk tubes then injected them into the donuts- this worked awesome! Finally, I rolled chocolate onto the Boston Cream donut and sprinkled confectioners’ sugar on the Jelly donut. Both of these caffeine donuts were delicious. Here’s the question- which one would you choose? @hausplans #construction #heavyequipment #cooking #5hourambassador

    Not rated yet
  • MAX Just Sent Me The Best Gift Ever- Their Stand-up TWINTIER RB401T-E

    · 1 min

    Who said construction work is hard on your body? I’m 25 and I feel great! Actually, bending over all day tying rebar is killing me. But MAX just sent me the best gift ever- their Stand-up TWINTIER It uses a 5-amp battery and can tie up to 4,600 times on one charge. There’s a dial that lets you select how tight you want it to tie. This thing is crazy fast… check it out in slow motion. It literally ties two pieces of rebar in ½ of a second. It’s called the “TWINTIER” because it uses two pieces of wire for every tie. The wire feeds from a spool- to switch them out you just release the tension, remove the old spool, and feed in a new one. Honestly, this turns a job I used to dread into something fun. And here’s another cool thing, the handles are adjustable, because let’s face it not all construction workers are the same size. I love that MAX is building tools to save wear and tear on our bodies. What tool should they make next? @hausplans #build #howto #construction #tools #MAX #TWINTIER #gift #contractor

    Not rated yet
  • What’s Keeping This Garage Floor From Collapsing?

    · 59 sec

    What will keep this garage floor from collapsing under the weight of a vehicle? Grade Beams. A grade beam is a reinforced concrete beam that sits under a slab. These beams will be supported by a pier in the middle and pockets in the foundation walls. The engineering for this slab calls for 3 half inch rebars in each beam. The building code in our area requires an engineered design for any garage with more than two feet of fill. Now a lot of people think rusty rebar is a problem, but it’s not. Once the rebar is fully encased in concrete it can no longer get oxygen and the rusting process stops. This floor will be a suspended slab. In theory, after the concrete cures you could actually dig out all the gravel and the floor would be fine. Here you can see where both grade beams pass over the pier in the middle. The floor engineering calls for a 4” thick slab with a ½” rebar grid 12” on center both ways. The entire floor is supported by the foundation walls and grade beams with a pier in the middle. So, what do you think? Did we use too much rebar or not enough? @hausplans #build #howto #construction #diy #contractor #concrete #garage

    Not rated yet
  • How I Stopped Concrete From Rotting This Wood

    · 1 min

    This might be the stickiest stuff on earth. It’s a peel and stick waterproof membrane. I’m using it to protect the band board between the house and the garage where the concrete floor will touch. To start with we installed ½” pressure treated plywood in this area and nailed it on with galvanized nails. Next, I snapped a line 6” higher than the top of the garage floor. This membrane is 60 mils thick and it’s designed for waterproofing foundations below grade, but I’m using it to protect the wood. First, I peel away the top half of the release liner on the back of the membrane. There’s a line down the side of the membrane, so you know how far to overlap each piece. I stick it on at the top and then work my way down. Because concrete always retains a certain amount of moisture you don’t ever want it touching bare wood. This membrane will completely protect the wood, and the pressure treated plywood behind is extra insurance. Now on a really hot day this membrane can start to droop, so I like to use ZIP tape to tape along the top - ½ on the membrane and ½ on the plywood. So, what do you think- is this overkill or money well spent?@hausplans #build #howto #concrete #garage #construction #diy #contractor

    Not rated yet

More in How-To and DIY

See all How-To and DIY shows