How To Form a Concrete Porch Like a Pro
From HAUS PLANS ®️ · · 1 min

The player loads from YouTube only when you click. It uses YouTube's privacy-enhanced mode.
If the video does not play, the owner may have turned off embedding. Watch it on YouTube instead.
Description
I’m gonna teach you how to form up a concrete porch like a pro. Always use three-quarter inch plywood for your form boards because it’s strong. Set your saw blade depth just below the plywood for the cleanest cut. I actually cut this piece a little crooked, so I’m flipping the factory edge up. I fasten the left side of the plywood to the house framing with T25 deck screws. Then I use masonry screws along the bottom, about one every two feet — these things work awesome. Look how tight it draws the board against the foundation. For the right side, I cut a small 2x6 block and screw it to the garage wall framing. I check that everything’s plumb, then screw the form board to the block from the inside. I attach a 2x6 flat along the top - this helps to keeps the plywood straight and reinforces it. Concrete is super heavy and we don’t want these form boards flexing at all. Finally, I fill any small gaps with foam. We’re adding stone and a rebar grid next - follow along so you don’t miss it. @hausplans
#build #howto #construction #diy #contractor