I Do Cars
I Do CarsVideo
- Format:
- YouTube channel
- New videos:
- Several times a week
- Typical length:
- about 40 minutes, not counting Shorts
- Latest video:
About this show
Welcome to my channel, I Do Cars. Its an answer to the awkward question "So what do you do?". On my channel you'll find videos of the dumb and overzealous car projects I take on personally. You'll also find videos of getting cars running that are either wrecked, or have been sitting for a long time. There will be some how-to repair videos as well because showing people how to fix their vehicle themselves is what I love to do. Of course, you'll find engine teardown videos. Lots, and lots of engine teardown videos. One a week, at least. I own and run an auto salvage operation and part of our model is tearing down bad or core engines and selling the parts. Taking these engines apart is just another day in the office, so I'm happy to bring you along!
Contact info: Non parts buying email: Mazdamiester@gmail.com To buy parts email: Importapartsales@gmail.com
Mailing address Importapart C/O I Do Cars 7373 Hazelwood Ave Hazelwood MO 63042
Videos come from the channel's public YouTube feed. The artwork is the newest video thumbnail. Last updated . Names, artwork and text belong to their publishers.
Cosmos
Similar by topic and creator
- RezzyCarz
Shares the topics Cars and Motoring and How-To and DIY. - High Peak Autos
Shares the topics Cars and Motoring and How-To and DIY. - Drivewhisperer
Shares the topics Cars and Motoring and How-To and DIY.
Videos
FUTURE DISASTER FOR GM? Chevy Trailblazer 1.2L LIH Engine Failure At 85K. How Do You Avoid This??
· 41 min
For parts visit www.Importapart.com or email us at Importapartsales@gmail.com. This engine may just be the biggest let down I've had on the channel since the V35A. This is the 1.2L 3-cylinder, RPO code LIH, from a 2021 Chevrolet Trailblazer. This is from a car with 85,000 miles and a pretty solid maintenance history. These engines make 136hp and 162lbft of torque and can be found in the Buick Encore, Buick Envista, Chevrolet Trax and Chevrolet Trailblazer. This engine has one major achilles heel and it looks like this one was bitten by it. But WHY does GM recommend such an extended interval on this part? Aside from changing it much more often, how would ever avoid this failure? Along with the class-action lawsuit with broken connecting rods, the transmission, this failure nearly cements a shorter than desired lifespan for ANY vehicle with this engine. These are in cheaper, smaller cars that people depend on. These are cars bought by people who need reliable transportation and with the expense of "maintenance" the savings of owning a car like this is easily negated. Shameful, just to save a few bucks? The real question is how wide spread will this failure be? was this an anomaly or will this affect a large chunk of them. For More I Do Cars content, check out my wife's channel @TheCarWifeLife For AWESOME car shirts like the ones I wear, visit blip shift here: https://www.blipshift.com/?utm_source=i-do-cars&utm_medium=affiliate Every week I post a new teardown video of a blown up or suspected bad engine. Check out a few of my favorites! Toyota Tundra V35A Teardown #2, YIKES. https://youtu.be/SqxThrmRPbU Nissan Rogue 1.5L VC-TURBO Teardown https://youtu.be/134eSD5eQts Ford 1.0 Ecoboom teardown https://youtu.be/0yx1-50iqnA Why am I doing this? My name is Eric and I own and run Importapart, a full service auto dismantling business. Part of our model includes buying blown up and bad engines to dismantle for parts. We salvage the good, sellable parts and recycle rest. No, we don't rebuild engines but we do sell parts to people who do! As always I hope you enjoyed this video. I love all of the comments, feedback and even the criticism. Catch you on the next one! -Eric 00:00 Intro 02:30 Pulling the plugs and inspecting the intake ports. ALL the valves are OPEN? 03:41 Zipping off the valve cover bolts 04:07 OHHHH NOOOOO MONEY SHOT BAD! 07:58 Removing crank pulley, timing cover 08:40 THIS IS UNACCEPTABLE 13:08 Cracking the cramps loose. This thing WRECKED some rockers 15:56 Cracking the head bolts loose and decapitating the engine 16:47 FORCEFUL RE-ENGINEERING OF THE VALVE RELIEFS 17:55 SCIENCE, then turning the engine over to pull the oil pan 19:40 OPE, THAT DOESN'T GO THERE 21:00 Removing the oil pump and dismantling it. Yikes 25:52 Unbolting and removing the upper oil pan or lower block 27:47 Cracking the rod caps loose and removing rods and pistons 28:52 gingerly removing the crankshaft 30:00 Careful examination of the rods, pistons, crankshaft, bearings, block. Yep, not great. 33:33 Summary
Not rated yet6000 Mile Mustang Show Car Revival Part 1. Undoing the wrongs of the past, Finding MORE PROBLEMS!
· 33 min
First video: https://youtu.be/AUGvkBWv9o0 The Mustang project BEGINS! This is a 2006 Mustang GT I bought at an impound lot. This car was abandoned, damaged, and tells the story of a careless previous owner. What once was https://www.americanmusclecarz.com/vehicles/15448/2006-ford-mustang-gt is now in dire need of repair. Cracked control arms. Bent K member, stripped shocks, damaged brake caliper. Body damage from a shredded tire. The list is long but compared to my other projects, this one isn't so bad. In this video I'n going to undo the "engine dress up" stuff, dechrome the engine bay, and remove the aftermarket radio and subwoofer in favor of the factory head unit. How well was this stuff installed? it was installed at a shop so it should be good, right? RIGHT? Well, we uncover some additional things to sort with some surprises but slowly, this car will return to its former glory. For More I Do Cars content, check out my wife's channel @TheCarWifeLife For AWESOME car shirts like the ones I wear, visit blip shift here: https://www.blipshift.com/?utm_source=i-do-cars&utm_medium=affiliate If you're inquiring about a vehicle in this video that I mentioned selling, my email is Mazdamiester@gmail.com Here's a few of my favorite vehicle revival videos: E36 328is Manual BACK IN ACTION! https://youtu.be/K1vNFhXameo Ford F250 ALIVE after 10 years! https://youtu.be/HIih0-Ou4u8 This RANGER is out of DANGER! https://youtu.be/EdVBIyGdVDA I hope you enjoyed this quick little update. As always I love all of the comments, feedback and even the criticism. Catch you all on the next one! -Eric
Not rated yetFACEPALM! This car maker DOES NOT CARE after it’s out of warranty. #engineteardown
· 1 min
Next teardown, 11-14-26! Going to be a giant let down for many, a facepalm for others, and a pit in your stomach if you own one of these cars. I teardown failed engines across all major manufacturers both new and old. Sometimes, the owner is to blame. Sometimes, cheap parts cause a failure. Poor repair procedures or lack of following them, accidents, etc. these are all real causes of engine failure. What happens when it’s clearly planned obsolescence AND the manufacturers suggested maintenance interval is drastically too far? You’ll have to wait and see!
Not rated yet"An Extra 2,000 Miles Won't Hurt..." Kia Stinger TWIN TURBO Lambda V6 Engine Teardown says it does!
· 33 min
For parts email us at Importapartsales@gmail.com or visit our websites www.Importapart.com www.Pro-Rebuild.com Today we have a the twin turbo 3.3L Lambda V6, known as the G6DP from a 2019 Kia Stinger! This engine is also in many different Genesis models. This is a core engine out of a 2019 with just over 100k miles. This was replaced at the dealership with a new engine, hence why it is stripped down as many parts had to be transferred over. I didn't get a story as to what happened, so this teardown will hopefully answer that question. How did it fail? For More I Do Cars content, check out my wife's channel @TheCarWifeLife For AWESOME car shirts like the ones I wear, visit blip shift here: https://www.blipshift.com/?utm_source=i-do-cars&utm_medium=affiliate Every week I post a new teardown video of a blown up or suspected bad engine. Check out a few of my favorites! Toyota emailed me, and told me a story...https://youtu.be/b-EJBxTm9Jc HOT ROD Small block found in the scrap pile https://youtu.be/9-GzyOmYLFc Why did someone give up on this BBC? https://youtu.be/FbvQNH7ziGU Why am I doing this? My name is Eric and I own and run Importapart, a full service auto dismantling business. Part of our model includes buying blown up and bad engines to dismantle for parts. We salvage the good, sellable parts and recycle rest. No, we don't rebuild engines but we do sell parts to people who do! As always I hope you enjoyed this video. I love all of the comments, feedback and even the criticism. Catch you on the next one! -Eric 00:00 Intro 03:00 Zipping the valve cover bolts out.... Oh, caramel 05:18 Checking the VVT Solenoids for metal. EUREKA! 06:23 Stripping and unbolting the timing cover to reveal the timing system 10:07 Cracking the cam cramps loose to inspect the cams and journals on RH Bank 11:52 These headbolts sound like my knees! 12:47 Looking at the pistons and bores, not terrible but not great 13:38 SCIENCE, OOF. Then onto the LH Bank 15:54 Cracking the LH Head bolts loose, and yanking the head 16:43 Oof, the bores 18:14 Turning the engine over and unbolting the oil pan. 19:24 GREAT MOTHER OF ANTISIEZE! 20:03 Unbolting and dismantling the bearing pump 22:21 Cracking the first rods and pistons loose 23:09 Spin me baby right round right round 25:14 Removing the rear main seal plate, and unbolting the main caps 26:11 Full rotating assembly inspection. Rods, pistons, bores, crank and the bearings...the bearings. and rings, yikes 30:37 Summary
Not rated yetThey Only Changed The Oil TWO TIMES in 70k? 2021 Ford Explorer 3.0 Ecoboost V6 Engine RUINED!
· 36 min
For parts visit www.Importapart.com or email us at Importapartsales@gmail.com. Today we have the FIRST 3.0L Ecoboost V6 on the channel. This particular specimen is from a 2021 Lincoln Aviator, a glorified Ford Explorer. This engine is a core return. A salvage yard sold a good used engine and got this back as a core. I didn't get any history or a story with this engine, but most late model ford engines have the last 8 of the VIN stamped into the block. I was able to get the entire VIN, and run a carfax. While carfax does not tell the entire story, this vehicle showed LARGE gaps in maintenance and services including oil changes. There are only TWO oil changes on record in the nearly 70k miles this vehicle traveled. That doesn't mean it wasn't changed more often, it just means they weren't reported which is why you can't simply rely on one source of information. Wellllll, as soon as I had the first valve cover off, we KNEW. We could tell the carfax was fairly accurate and this engine did NOT have proper maintenance. Yikes almighty, we haven't seen this kind of varnish and sludge in a late model engine in a long time! So how well did this engine put up with this neglect? What was the straw that broke the camels back, and could this issue have been found BEFORE the engine failed? Thats what this teardown will show. For More I Do Cars content, check out my wife's channel @TheCarWifeLife For AWESOME car shirts like the ones I wear, visit blip shift here: https://www.blipshift.com/?utm_source=i-do-cars&utm_medium=affiliate Every week I post a new teardown video of a blown up or suspected bad engine. Check out a few of my favorites! Ford 2.7L Nano Teardown. https://youtu.be/w08n-kIrLKM 7.3L Godzilla teardown. Will this plague them all? https://youtu.be/kNUXIzHz3fk Recalled GM 6.2L L87 Teardown https://youtu.be/ohGx0xIanNY Why am I doing this? My name is Eric and I own and run Importapart, a full service auto dismantling business. Part of our model includes buying blown up and bad engines to dismantle for parts. We salvage the good, sellable parts and recycle rest. No, we don't rebuild engines but we do sell parts to people who do! As always I hope you enjoyed this video. I love all of the comments, feedback and even the criticism. Catch you on the next one! -Eric 00:00 Intro 02:45 Why didn't ford use Dual injection on the 3.0 ecoboost? 03:57 GOOOOOOO That looks TERRIBLE for 70k! 06:17 THIS is why I would ALWAYS pull a VCT Solenoid before buying a car or an engine! 08:38 Removing the crank pulley and timing cover. It gets worse. 11:35 Stripping the timing system off of this engine, the guides are varnished too! 12:48 Cracking the cam caps loose and inspecting the valvetrain 14:39 Removing the headbolts and yanking the head. Pretty heavy head gaskets. 16:29 Rinse and Repeat on the other bank. My tools, my poor tools 18:33 Prying the head off, these have VERY tall dowel pins 19:39 Science of course 20:46 SILVERY FORBIDDEN GLITTER EVERYWHERE! 21:37 Removing and dismantling the oil pump 23:06 The REAL problem with kevlar oil pump belts 24:12 Unbolting the upper oil pan/lower block 25:32 The Nano's CGI block is pretty impressive, can't see anything wrong yet! 26:37 Cracking the rod cap bolts loose and removing the bearing shells 28:00 Cracking the main caps loose and plucking the crank out, then pushing the rods and pistons out of the block 28:49 A closer look at the rotating assembly. REALLY impressive how well this engine tolerated poor oil conditions. 31:51 Summary
Not rated yet$10K Engine RUINED! How Did This Porsche 911 MA1 Flat 6 Fail? Full MA1.04 3.4L Teardown!
· 49 min
For parts email us at Importapartsales@gmail.com or visit www.Importapart.com Today's teardown is a tough one to find and the first on the channel! This is the Porsche MA1.04 out of a 2012 911. This is a 3.4L Flat 6 that makes about 350hp. We owe this teardown to a view, Steve in Drums PA! He donated this engine for a video and without this, it's really unlikely I'd be able to find one of these engines to teardown. He told me this engine was run out of oil. Pretty early on we see why, and not until the very end do we see the full extent of the damage. It was also interesting to note the differences between the MA1 and the 2 generations previous M96. Lots of improvements and a few things that make it more disposable. For More I Do Cars content, check out my wife's channel @TheCarWifeLife For AWESOME car shirts like the ones I wear, visit blip shift here: https://www.blipshift.com/?utm_source=i-do-cars&utm_medium=affiliate Every week I post a new teardown video of a blown up or suspected bad engine. Check out a few of my favorites! Lamborghini V10 HIGH RPM FAILURE https://youtu.be/qhH30G7980I Porsche M96 Track day failure https://youtu.be/qrkALiq5hTU Rolls/Bentley 6.75 Litres of disaster https://youtu.be/4dUZ-yHik7A Why do I do this? My name is Eric and I own and run Importapart, a full service auto recycling business. Part of our model includes buying and dismantling core, bad, and broken engines to salvage the good parts and recycle the rest. We do not rebuild engines, merely supply parts to those who do. As always I hope you enjoyed this teardown. I love all of the comments, feedback and even the criticism. Catch you on the next one! -Eric 00:00 Intro 02:03 Removing the spark plugs, they look ok? 03:39 Unbolting the valve covers, we have NORMAL Cam caps! 04:17 Valvetrain looks nice. 06:07 Look ma! No cam holding tools needed! 07:05 Pulling the crank pulley and a few parts off of the front of the engine 07:44 THE WATER PUMP WINS UNTIL IT DOESN'T 08:58 Timing chain tensioner and guide bolt removal 09:45 Camming the cam cramps loose on the LH Bank 10:10 The cams and journals are almost PERFECT! 12:12 Removing perimeter head bolts and then the BIG head bolts 12:49 Tearing its head off & checking out some bores 14:37 SCIENCE bank 1 14:49 Same story, different bank. 18:55 Cracking the head bolts loose on the second bank, and removing the head 19:58 Inspecting the bores, pistons and head on the second bank 21:34 Unzipping the lower oil pan 22:32 clearing the upper pan, and removing it 24:06 Removing and dismantling the oil pump. This is cool 26:04 first look at the crankshaft, can't see trouble 26:44 The marshmallows 27:15 Turning the engine over, HARSH 28:08 THE MISSION, This is how to split an MA1 28:57 The easy one 30:42 The harder one 33:43 THE IMPOSSIBLE ONE 36:03 *chef's kiss* (flying circlip) 37:06 Unbolting the case halves 38:37 Splitting the block splitting the block 39:16 Wait, this isn;t a V35A 39:45 Unbolting 3 rods and plucking the crank out 40:20 Pushing the rods and pistons and pistons out 41:29 Full rotating assembly inspection. Wowza its wrecked! 45:35 Summary
Not rated yetI think this is the WORST LS1 V8 Engine I've EVER torn down. High RPM MEGA FAILURE!
· 43 min
For parts visit www.Importapart.com or email us at Importapartsales@gmail.com. This could be the WORST LS1 I've had on my stand! This is likely a core return for a good sold engine. What started live as a 2004 Corvette 5.7L V8 has apparently had an interesting past. I picked up this core with a gaggle of other cores for scrap price. I noticed that someone has installed some extra ventilation ports in multiple spots. How did this happen? How bad is it, on the inside? What will we find as we tear down this "scrap" engine and will it be profitable? These are the questions we'll hopefully answer in this video. For More I Do Cars content, check out my wife's channel @TheCarWifeLife For AWESOME car shirts like the ones I wear, visit blip shift here: https://www.blipshift.com/?utm_source=i-do-cars&utm_medium=affiliate Every week I post a new teardown video of a blown up or suspected bad engine. Check out a few of my favorites! Recalled L87 Teardown https://youtu.be/ohGx0xIanNY GM 3.0L Duramax DEAD @46K https://youtu.be/6C6xgZs9uUs Dodge 3.6 Pentastar SHREDDED https://youtu.be/IAmkd1U8XoQ Why do I do this? My name is Eric and I own and run Importapart, a full service auto recycling business. Part of our model includes buying and dismantling core, bad, and broken engines to salvage the good parts and recycle the rest. We do not rebuild engines, merely supply parts to those who do. As always I hope you enjoyed this teardown. I love all of the comments, feedback and even the criticism. Catch you on the next one! -Eric 00:00 Intro 02:49 Pulling wires and plugs, we have Malice in the Combustion Palace 04:17 Removing the intake manifold and inspecting the intake ports. SOMETHING IS MISSING! 06:06 Unbolting the exhaust manifolds and uh, something is missing? 07:12 HEY THAT'S NOT NICE 08:32 What's behind head number one? NUGGETS 11:50 And head number two? ITS CAVERNOUS! 13:52 75% grade on your science test? Still passed. 14:45 Removing the harmonic balancer, timing cover and cam gear 15:19 Eric Vs Camshaft Round 1. CAMSHAFT WINS! 17:50 Unbolting the blast basket to check for carnage... shipped and delivered. 20:03 Removing the pickup tube and windage tray, more parts hit the ground 21:41 First look at the grinding assembly. This is IMPRESSIVE 24:18 Unbolting the rods and pistons, all SIX 27:45 Zipping out the main caps and plucking the crankshaft out of the block 28:23 Eric Vs. Camshaft Round 2. ERIC WINS! 30:01 A closer look at every part of the rotating and flailing assembly. The pulverizers are damaged, the grinders are worn but its final moments were probably rather loud 36:56 Summary
Not rated yetTearing down the 3rd FAILED Toyota Tundra V35A Engine. Will this give us the answers we need?
· 52 min
WELCOME TO THE TOYOTA V35A SAGA. I'm your host Eric and THIS, is the third V35A I've now torn down. The V35A is the 3.4L Twin Turbo V6 in the current generation Tundra, Sequoia, Lexus GX550 and LX600 as well as the LS500. This engine is in the national spotlight for main bearing failure and has an extensive recall covering this failure. Here's the order of events with my V35A saga: The first V35A I tore down came from a 2022 or 2023 model year truck, and it failed spectacularly by spinning every single main bearing. That can be seen here: https://youtu.be/vL4tIHf_9i8 Then last month, I found a 2026 REPLACEMENT V35A that spun the #3 main bearing. That video: https://youtu.be/SqxThrmRPbU 6 Days after that video uploaded, I received a letter from Toyota corporate with an explanation to why this engine failed and why it wasn't their fault. SO, I posted a DEEP DIVE into the 2026 replacement engine and found some VERY interesting things while also disproving their "facts" That video is: https://youtu.be/b-EJBxTm9Jc Which leads us to today! This is a September 2025 replacement engine that seemingly has failed in a DIFFERENT fashion but could provide some valuable clues and information to the root cause of these failures. Join me as I discover, prove and disprove, and draw reasonable conclusions based on first hand evidence on what could be causing premature failure of so many of these engines. For more I Do Cars content please check out my wife's channel @TheCarWifeLife For AWESOME car shirts like the ones I wear, visit blip shift here: https://www.blipshift.com/?utm_source=i-do-cars&utm_medium=affiliate Every week I post a new teardown video of a blown up or suspected bad engine. This week is a V35A! Why do I do this? My name is Eric and I own and run Importapart, a full service auto recycling business. Part of our model includes buying and dismantling core, bad, and broken engines to salvage the good parts and recycle the rest. We do not rebuild engines, merely supply parts to those who do. For parts visit www.importapart.com or email us at Importapartsales@gmail.com. As always I hope you enjoyed this teardown. I love all of the comments, feedback and even the criticism. Catch you on the next one! -Eric 00:00 Intro 04:29 Pulling the spark plugs and inspecting them 05:27 Clearing the charge piping, intercooler, and lots of hoses, pipes and brackets off of the engine 06:28 Unbolting the upper intake plenum, and then the lower manifold 07:29 Inspecting the intake ports. Not a trace of carbon on this dual injection engine 08:07 Removing the RH turbo(the only one left) and inspecting 09:39 zipping all of the valve cover bolts out and inspecting the valvetrain. Clean as a pin! 11:10 Clearing all of the parts off of the timing cover 12:26 OH YUCK. Who put this gunk in here? 13:15 Unbolting just the few outer timing cover bolts and exposing the timing system 14:49 Striping the timing system, cam phasers and the idler... THE IDLER! 16:37 The timing idler, any debris here? 17:59 Peeling the inner timing cover off and starting to dismantle the valvetrain(Time for cramming!) 18:45 inspecting the LH valvetrain and then cracking the headbolts loose, AND MY SOCKET 21:25 OHHHH NOOOOO 23:45 My kinda science 25:53 Cracking the headbolts loose on the RH Bank, and droooooopppp 28:51 Science, science, Banana 31:12 Excluse me sir, can you provide an oil sample? drain in this cup 31:39 Unbolting the lower oil pan. not bad, but IMPERFECT 32:58 Removing the upper oil pan, pickup and windage tray 34:19 Unbolting the rods and pistons 36:03 Time to remove the bedplate.... how's the crank? 37:16 HOW ARE THOSE MAINS? 40:09 Even the rod bearings... tisk tisk 41:32 Borescope time! How are these oil galleries? 45:34 Summary
Not rated yetThis is the WILDEST Car I'll EVER buy from a tow lot. How does it get so bad?
· 38 min
For parts visit www.Importapart.com or email us at Importapartsales@gmail.com. I own and run a full service auto salvage business and being the "buyer" for this business I often run across some pretty crazy cars. THIS BY FAR is the craziest one and I decided to take this home. Why? well, its cool OK!? So what am I going to do with this car? FIX IT of course. In the coming weeks and months there will be several update videos bringing it back to its former, well preserved glory For More I Do Cars content, check out my wife's channel @TheCarWifeLife For AWESOME car shirts like the ones I wear, visit blip shift here: https://www.blipshift.com/?utm_source=i-do-cars&utm_medium=affiliate If you're inquiring about a vehicle in this video that I mentioned selling, my email is Mazdamiester@gmail.com Here's a few of my favorite vehicle revival videos: E36 328is Manual BACK IN ACTION! https://youtu.be/K1vNFhXameo Ford F250 ALIVE after 10 years! https://youtu.be/HIih0-Ou4u8 This RANGER is out of DANGER! https://youtu.be/EdVBIyGdVDA I hope you enjoyed this quick little update. As always I love all of the comments, feedback and even the criticism. Catch you all on the next one! -Eric
Not rated yetWHY DO I DO THIS TO MYSELF? Project Car Update. Progress, Sales & MORE BROKEN STUFF!
· 16 min
I've been busy! So here's a quick update on SOME of the project fleet. I've sold some, bought some, fixed some, and broke some. Thats kinda how it goes trying to maintain a gaggle of 20+ year old cars that are predisposed to constant problems. I've had lots of projects my entire life and while to some, having to tend to this many projects at once may seem daunting, I find it therapeutic. I thrive in always having something to do that I can actually get done. Many of these cars I have a long history with, some I need to finish and sell, some I need to sell before I get started and some I simply get to drive and enjoy the fruits of my labor. I own and run an auto salvage business and constantly buying cars for product for it leaves me fishing in the same pond that many of my bucket list cars end up in so it only makes sense that occasionally I cross paths with a car I can rescue, revive and throw back into circulation or so is my intent. If you need parts, email us at Importapartsales@gmail.com or visit www.Importapart.com. For More I Do Cars content, check out my wife's channel @TheCarWifeLife For AWESOME car shirts like the ones I wear, visit blip shift here: https://www.blipshift.com/?utm_source=i-do-cars&utm_medium=affiliate If you're inquiring about a vehicle in this video that I mentioned selling, my email is Mazdamiester@gmail.com Here's a few of my favorite vehicle revival videos: E36 328is Manual BACK IN ACTION! https://youtu.be/K1vNFhXameo Ford F250 ALIVE after 10 years! https://youtu.be/HIih0-Ou4u8 This RANGER is out of DANGER! https://youtu.be/EdVBIyGdVDA I hope you enjoyed this quick little update. As always I love all of the comments, feedback and even the criticism. Catch you all on the next one! -Eric
Not rated yetThis 2025 Toyota Tundra V35A is the NEXT teardown! I hope this one hasn’t failed catastrophically
· 1 min
This next teardown is the 2025 replacement V35A I teased in past videos. This engine unlike the V35a’s I’ve torn down in the past turns over freely which will hopefully mean the rotating assembly is intact. This is important because having an engine that has yet to grab a main bearing will be the ideal testing subject and yield unskewed results, whereas testing an engine that has spun a bearing does not give a good indicator of problems that pre-existed the failure
Not rated yetIT JUST SHUT OFF MOM! Dodge Dakota 4.7L V8 Engine Teardown TELLS the REAL STORY!
· 43 min
For parts email us at Importapartsales@gmail.com or visit www.Importapart.com and www.Pro-Rebuild.com Today we have a task. Prove or disprove what a 16 year old dodge Dakota driver told his parents after the engine "failed". He claimed he drove through a "puddle" and the engine "shut off" Hmmmmm yeah, ok. We can check for that. So let's tear down this 4.7L Powertech V8 to see how much his claim holds water. This is a 4.7L Powertech V8 found in many Dodge, Jeep and even Chrysler vehicles. These engines came out in 1999 and continued to plague these vehicles until 2013. That sounds harsh, and many of these engines to last MANY miles. These engines suffer a myriad of issues including dropped valve seat, timing guide failure, lifter and roller rocker issues and of course oil consumption. This also applies to its nearly identically powered (in the early years) 3.7L V6. Even with these issues, let's see if this engines failure is related to a design flaw, or the 16 year old drivers excuse. For More I Do Cars content, check out my wife's channel @TheCarWifeLife For AWESOME car shirts like the ones I wear, visit blip shift here: https://www.blipshift.com/?utm_source=i-do-cars&utm_medium=affiliate Every week I post a new teardown video of a blown up or suspected bad engine. Check out a few of my favorites! The mighty Jeep 4.0L RUINED! https://youtu.be/aD_Y7nUMWNk Recalled GM 6.2L L87 Teardown https://youtu.be/ohGx0xIanNY 415,000 Miles on a 2JZ! https://youtu.be/n7MSlbAhiBc Why do I do this? My name is Eric and I own and run Importapart, a full service auto recycling business. Part of our model includes buying and dismantling core, bad, and broken engines to salvage the good parts and recycle the rest. We do not rebuild engines, merely supply parts to those who do. As always I hope you enjoyed this teardown. I love all of the comments, feedback and even the criticism. Catch you on the next one! -Eric 00:00 Intro 02:41 Pulling the plugs and intake, and inspecting 05:20 Unbolting the Valve covers and looking for signs of trauma. Ope. Found some specs of abnormal engine operation 07:58 Removing the harmonic balancer, unbolting the timing cover 08:37 Inspecting and removing the timing chains, guides and tensioners 10:52 Cramming the cam cramps loose on the LH bank 11:16 Groovy Baby! 12:14 Cracking the LH head bolts loose and yanking the cylinder head 13:08 HOW DOES THIS HAPPEN!? 15:46 Science test. YOU FAIL! 16:16 More cramming on the other side of the engine 17:35 RH Head bolt removal, yanking the head. Somehow, this side is better? 19:45 Turning the engine over to remove the blast basket 21:12 Finely Minced Powertech 23:45 Removing the pickup tube and windage tray, and dismantling the bearing pump 26:29 Removing two stubby rods 28:41 Unbolting the bed plate, removing the crank and pushing two stubby pistons out 29:42 THE EVIDENCE IS STACKING UP! 38:06 Summary
Not rated yet2022 Ford F-150 3.5L Ecoboost Fails At 180K In FOUR YEARS! Is the 3rd Gen The Best One Yet?
· 37 min
For parts visit www.Importapart.com or email us at Importapartsales@gmail.com. Today we have the first 3rd generation 3.5L Ford Ecoboost I've had on the channel. This is the engine out of a 2022 F-150 Lariat with 180,000 miles. I was not told how it failed but I was told it likely still ran but was replaced. This truck was built 5/22 making this 180k attained in JUST 4 years! So how does a gen3 3.5 ecoboost fair after 180K? What ultimately caused this engine to be replaced and could this have been avoided? Thats what this video will hopefully prove as we completely tear down this engine and try to find a failure mode and perhaps a root cause. For More I Do Cars content, check out my wife's channel @TheCarWifeLife For AWESOME car shirts like the ones I wear, visit blip shift here: https://www.blipshift.com/?utm_source=i-do-cars&utm_medium=affiliate Every week I post a new teardown video of a blown up or suspected bad engine. Check out a few of my favorites! 2nd gen ecoboost breaks a WHAT https://youtu.be/CfON7X5j6X0 Tundra 3.4L Twin Turbo 2026 replacement FAILED https://youtu.be/SqxThrmRPbU Ford 300 straight six teardown https://youtu.be/oJoiC03rxcg Why do I do this? My name is Eric and I own and run Importapart, a full service auto recycling business. Part of our model includes buying and dismantling core, bad, and broken engines to salvage the good parts and recycle the rest. We do not rebuild engines, merely supply parts to those who do. As always I hope you enjoyed this teardown. I love all of the comments, feedback and even the criticism. Catch you on the next one! -Eric 00:00 Intro 02:19 Pulling the coils and plugs and inspecting 03:17 Unbolting the upper intake plenum and valve covers 04:28 Looks OK in here... but those new solenoids? #suspicious. 07:04 Removing the LH Turbocharger, spins good, but where's the other? 08:03 Striping the front timing cover, thermostat, water pump, crank pulley and idlers 09:27 Zipping out just a couple of timing cover bolts to reveal the timing system 10:24 Inspecting the timing system and checking out the intake valves with dual injection 11:55 Removing all of the timing system parts, tensioners and rails, Ope, broke it. 14:03 BIG UH OH! 14:49 Cramming the cam craps loose, pulling camshafts and inspecting heads 16:29 Cracking the LH head bolts loose, and ripping the head off. SO MUCH CARBON 18:38 SCIENCE, then more cramming 19:27 Inspecting cams and journals on the RH Bank 20:45 These head bolts are CREEKY 21:46 A closer look at the pistons and bores, and more science 23:03 Unbolting the oil pan 24:14 Zipping the pickup tube and oil pump bolts out and then tearing the oil pump down 25:37 I am stubborn 27:25 turning the crank over, feels ok but a bit of resistance that feels wrong 27:48 Unbolting the first rod and piston 29:14 Unbolting and pushing the last rod and piston out of the block 29:34 Removing the main cap bolts and plucking the crankshaft out 30:00 Full short block inspection, block, bores, crank, rings, bearings, pistons, and OIL GALLERY 35:07 Summary
Not rated yetWAS TOYOTA RIGHT? I Dive DEEP Into a Failed 2026 Replacement Tundra V35A Twin Turbo V6 Engine!
· 58 min
The original teardown here: https://youtu.be/SqxThrmRPbU This is a Toyota Tundra V35A Twin Turbo V6 that is a 2026 Replacement from a failed recalled engine. This engine spun the #3 main bearing within months of installation. About 1 week after that teardown I received an email from Toyota corporate claiming I was missing details surrounding the circumstances around that particular engines failure, and they asked me to include these details in that video or publish a follow up. I asked for proof so I could show you all. I waited. And waited. While I did get a reply, it was void of the information I requested and got a "we're gathering it" I have yet to get any sort of evidence to back up their claim and I decided to dig a little deeper into this engine to either prove or refute their claim as well as check parts of this engine that I haven't seen anyone check yet. Perhaps they'll reach out with some compelling proof and I'll post another update. So this video is the deep dive. I think it's reasonable to assume that this is just one engine, and perhaps a unique situation. I don't think you can draw any conclusions about other engines from this particular case however I have another V35A, that is also 2025 replacement and may do some further testing down the road. For more I Do Cars content please check out my wife's channel @TheCarWifeLife For AWESOME car shirts like the ones I wear, visit blip shift here: https://www.blipshift.com/?utm_source=i-do-cars&utm_medium=affiliate Every week I post a new teardown video of a blown up or suspected bad engine. Check out a few of my favorites! The first Tundra V35A I tore down: https://youtu.be/vL4tIHf_9i8 High Mile Tundra 3UR-FE V8 Teardown: https://youtu.be/16QSew3rKeo 415K Mile 2JZ-GE Teardown: https://youtu.be/n7MSlbAhiBc Why do I do this? My name is Eric and I own and run Importapart, a full service auto recycling business. Part of our model includes buying and dismantling core, bad, and broken engines to salvage the good parts and recycle the rest. We do not rebuild engines, merely supply parts to those who do. As always I hope you enjoyed this teardown. I love all of the comments, feedback and even the criticism. Catch you on the next one! -Eric 00:00 Intro 00:39 The email toyota sent me 02:14 My reply and requests. Pretty reasonable I think? 04:38 The overview of last teardown 08:41 Thrust bearing location, does it matter? 12:41 That pesky oil fed timing idler. Is this a tell tale? 15:42 The V35A Oil circuit. EVERYTHING YOU NEED TO KNOW 24:10 THE WORST ARTIST ON THE PLANET. = ME 30:29 Bore scoping the oil supply circuits PT1. Yikes 32:42 Under the valley, the Tundra Files? 33:29 Removing the casting and oil galley plugs. 35:31 Maybe toyota was right? 39:31 How does the crank spin? 42:30 Using a dial indicator to check for crankshaft straightness 45:33 Reassembling the Block, bedplate and crank. 47:33 Bolting it together without the bad bearing. How's it spin all torqued down? 50:26 ALL of my thoughts 55:58 Summary
Not rated yetToyota Saw My Tundra V35A Engine Teardown and emailed me “it’s not our fault!”
· 43 sec
Got an email last week from Toyota corporate claiming the failure of this v35a twin turbo v6 engine was unrelated to them and caused from other circumstances. I guess that means we need to look closer! Were they telling the truth?
Not rated yetRECALLED Twin Turbo Tundra V6 Engine Failed IN MONTHS! 2026 REPLACEMENT DEAD! Toyota V35A Teardown
· 53 min
For parts email us at Importapartsales@gmail.com or visit www.Importapart.com This is the engine from a 2022 Toyota Tundra. The recalled V35A-FTS Twin Turbo V6 that has been a source of trouble for Toyota since its release. However, this is NOT the original engine which are said to fail from debris in the engine after machining. This is a replacement engine from 2026, which means this engine likely has one or two oil changes on it at the most. It's practically new, and yet it has failed AGAIN! Did it fail in the same way as the original? Thats what this teardown will hopefully show. For More I Do Cars content, check out my wife's channel @TheCarWifeLife For AWESOME car shirts like the ones I wear, visit blip shift here: https://www.blipshift.com/?utm_source=i-do-cars&utm_medium=affiliate Every week I post a new teardown video of a blown up or suspected bad engine. Check out a few of my favorites! The first Tundra V35A I tore down: https://youtu.be/vL4tIHf_9i8 High Mile Tundra 3UR-FE V8 Teardown: https://youtu.be/16QSew3rKeo 415K Mile 2JZ-GE Teardown: https://youtu.be/n7MSlbAhiBc Why do I do this? My name is Eric and I own and run Importapart, a full service auto recycling business. Part of our model includes buying and dismantling core, bad, and broken engines to salvage the good parts and recycle the rest. We do not rebuild engines, merely supply parts to those who do. As always I hope you enjoyed this teardown. I love all of the comments, feedback and even the criticism. Catch you on the next one! -Eric 00:00 Intro 02:29 The Discovery 04:42 Pulling the plugs... Almost New! 05:29 Removing the charge piping and intercooler 07:14 Unbolting the lower intake manifold and inspecting the intake ports 08:13 Peeling off the valve covers and inspecting the valvetrain. Why, it looks NEW in here! 10:37 Removing the turbochargers and inspecting. Full of crystal clean oil! 13:00 Unbolting the PLASTIQUE Front Coolant crossover. #costcutting. 14:44 Gentle water pump care and handling after removal 15:17 Unbolting the front timing cover, for ever. 16:21 The realization.... This is a 2026 manufactured engine. HOW IS IT BAD ALREADY? 19:42 Stripping the timing system 23:03 Too many bolts. Too many bolts. Too many holes for too many bolts. 24:10 The oil pump looks great through... 24:52 Cramming the V35A Cam caps loose, removing cam towers and inspecting. WHERES THE DEBRIS TOYOTA? WHERE? 26:38 Head bolts pop, head comes off. These pistons are perty shiny 28:40 More places for debris to be BUT WHERE IS IT? 29:31 Cracking the other bank head bolts loose and lifting the head. No signs of trouble here. 31:25 Science, then turning the engine over then turning the engine over 32:15 Unbolting the lower oil pan and *GLITTER INTENSIFIES* 33:11 Zipping out the upper pan bolts and removing it. See no trouble hear no trouble. 34:38 Removing the first pair of rods and pistons 36:23 The last two rod cap bolts and now its time for the BED PLATE 37:22 These bolts are TIGHT, but they're hiding something. 38:08 THE MONEY SHOT. Sorry V35A owners... 39:36 Full V35A-FTS rotating assembly inspection. Rings, bearings, rods, crank, bedplate, and block. 46:30 Final thoughts 49:36 #oopsies 50:27 Summary
Not rated yetDid I Find Someones Lost Hotrod Small Block Chevy? Tearing Down A HOT SBC That Was SOLD FOR SCRAP!
· 33 min
TO BUY PARTS, EMAIL US AT IMPORTAPARTSALES@GMAIL.COM and also visit www.Importapart.com or www.Pro-Rebuild.com Last week I stumbled across a rarity amongst my travels. A Genuine SMALL BLOCK CHEVROLET. Not the new injected stuff, the real deal carbureted kind. This wasn't some regular old engine from a truck. Right off the bat I could see it had aftermarket parts galore. So what is it, actually? What kind of parts does it have? Is it bad? What kind of stories can this engine tell us? For More I Do Cars content, check out my wife's channel @TheCarWifeLife For AWESOME car shirts like the ones I wear, visit blip shift here: https://www.blipshift.com/?utm_source=i-do-cars&utm_medium=affiliate Every week I post a new teardown video of a blown up or suspected bad engine. Check out a few of my favorites! Recalled GM L87 6.2 Teardown https://youtu.be/ohGx0xIanNY Ford 300 Straight outta the scrap pile https://youtu.be/oJoiC03rxcg Dodge Ram V10, OBLITERATED https://youtu.be/Ot-GbhaeaDw Why do I do this? My name is Eric and I own and run Importapart, a full service auto recycling business. Part of our model includes buying and dismantling core, bad, and broken engines to salvage the good parts and recycle the rest. We do not rebuild engines, merely supply parts to those who do. As always I hope you enjoyed this teardown. I love all of the comments, feedback and even the criticism. Catch you on the next one! -Eric 00:00 Intro 03:15 Pulling the valve covers off and OOOooooo Colors 04:40 Removing the valvetrain and inspected, What the heck were they doooooiiiinn? 07:22 Unbolting the head bolts and YANKING, errr prying the head off. 08:28 That's not stock 10:07 What's under the RH Head? 11:48 Removing the lifters, unbolting the crank pulley and improperly prying off the front timing cover. 13:36 Unstaking the cam gear bolts, removing the cam gear and timing chain. Good parts galore! 14:37 Trying to slide the cam out, but I have to turn the engine over to get the cam out? Clue 15:39 Sweet mambo jambo I bet this thing RIPPED with that hog stick 16:30 Unbolting the oil pan to find the silver mud 18:44 Removing the dismantling the oil pump 19:45 Arp hardware EVERYWHERE! lets remove the first of the rods and pistons 22:32 Unbolting the final two rods and pistons, main caps and plucking the crank out of the block 23:48 Inspecting the entire rotating assembly and WELL WELL WELL, No part of the engine was ignored! 29:24 Summary
Not rated yetThe right way to ship GM LS blocks and heads so they arrive alive!
· 27 sec
At Importapart we sell a ton of gen3 and gen4 GM LS architecture engine parts and we’ve shipped a ton of these over the last decade. We’ve learned a thing or two about what works and what doesn’t and here is how we do it. For parts visit Importapart.com or email us at Importapartsales@gmail.com
Not rated yetINSANE CARNAGE! Ford Escape 2.0L Ecoboost Engine Goes BOOM! Full Teardown With GIANT HOLES!
· 33 min
For parts email us at Importapartsales@gmail.com or go to www.importapart.com or www.Pro-rebuild.com Today we have some CARNAGE! This is the 2.0L Ecoboost 4 cylinder from a 2013 Ford Escape SEL with just under 200k miles. This engine has some VERY obvious damage on the outside from what happened to the inside, but what really happened? What caused such internal destruction? Was it a design flaw? was it owner error or abuse, or perhaps bad maintenance? Thats what I hope to answer in this video. This is the first generation of ford's 2.0L Ecoboost and in this trim, it makes 240hp and 270tq. They are available in a multitude of vehicles including the Focus, Fusion, Explorer, Edge, and the Escape. I personally think these are fairly reliable engines. Perhaps it's the failure rate of their transmissions that make the engines seem to last but I rarely get requests for this particular generation of 2.0L Ecoboost. For More I Do Cars content, check out my wife's channel @TheCarWifeLife For AWESOME car shirts like the ones I wear, visit blip shift here: https://www.blipshift.com/?utm_source=i-do-cars&utm_medium=affiliate Every week I post a new teardown video of a blown up or suspected bad engine. Check out a few of my favorites! Ford V10, The Connecting Rod KILLER https://youtu.be/2BYu9Cbhb4g Dodge Ram 8.0L V10, Nothing can top this one https://youtu.be/Ot-GbhaeaDw Kia Sorento V6 Teardown with NO SURVIVORS https://youtu.be/tBlRHAZEYSs Why do I do this? My name is Eric and I own and run Importapart, a full service auto recycling business. Part of our model includes buying and dismantling core, bad, and broken engines to salvage the good parts and recycle the rest. We do not rebuild engines, merely supply parts to those who do. As always I hope you enjoyed this teardown. I love all of the comments, feedback and even the criticism. Catch you on the next one! -Eric 00:00 Intro 01:46 Can we turn this shred-bomb over? KINDA 02:42 Unbolting and peeling off the valve cover. I DID NOT EXPECT THIS! 03:50 Removing the harmonic balancer and all of the timing cover bolts 04:15 ThAT POOR OIL PUMP! It didn't stand a chance *sniffle* 07:09 Cramming the cam cramps loose and inspecting valvetrain 08:46 Somewhat satisfying pop of the head bolts 09:14 NUMBER 1 IS GONE! 10:29 The head though... how did this survive? 11:02 SCIENCE then unbolting the blast basket 11:38 Ohhhhh nnnnooooooo The spoils are spoiled BAD 12:56 All of this from JUST ONE? 15:33 Oil pump extraction and autopsy. Blunt Force Trauma! 19:24 Removing the balance shaft cassette and RIP 20:42 Trying to get the mutilated rods and pistons out 24:23 Unbolting the main cap and crank girdle and plucking the crankshaft out 25:20 I KNOW HOW TO USE PLEIRS 25:44 Inspecting what's left of the rotating assembly. Rods, rodlettes, piston nuggets, rings, bearings, crankshaft and block. Yikes 29:17 Summary
Not rated yetTearing Down Another CATASTROPHIC Chevy 6.2L V8 Engine Failure! Can You Blame GM For This One?
· 37 min
For parts visit www.Importapart.com or www.Pro-rebuild.com Today I am taking everyone to CARNAGIE HALL. I set out to find the most religious, broken and destroyed engine I could for this week's teardown. My selection was this 6.2L L86 Gen5 LT based V8 I found under a pile of engines in a scrap bin. After finding the last 8 of the VIN on the block, calling the dealer and getting the entire VIN, I was able to see that this is from a 2014 Silverado High country with right about 200K miles. So why was this engine so wrecked? What happened and will I get ANYTHING worth selling from it? Thats what this video will hopefully answer. For More I Do Cars content, check out my wife's channel @TheCarWifeLife For AWESOME car shirts like the ones I wear, visit blip shift here: https://www.blipshift.com/?utm_source=i-do-cars&utm_medium=affiliate Every week I post a new teardown video of a blown up or suspected bad engine. Check out a few of my favorites! Recalled L87 6.2L V8 Teardown https://youtu.be/ohGx0xIanNY The MOST damaged engine I've ever torn down: https://youtu.be/Ot-GbhaeaDw Ford 7.3 Godzilla teardown https://youtu.be/kNUXIzHz3fk Why do I do this? My name is Eric and I own and run Importapart, a full service auto recycling business. Part of our model includes buying and dismantling core, bad, and broken engines to salvage the good parts and recycle the rest. We do not rebuild engines, merely supply parts to those who do. As always I hope you enjoyed this teardown. I love all of the comments, feedback and even the criticism. Catch you on the next one! -Eric 00:00 Intro 02:04 Peeling off the valve covers 03:47 Checking out the intake valves and ports, grody! 04:31 Cracking the rocker arms loose on the LH Bank and inspecting valvetrain 05:07 Cracking the head bolts loose and yanking the head 06:25 Oh, that's bad 08:13 Left science 08:32 Cracking the RH rocker arms loose, pulling the pushrods out 08:59 Cracking the RH head bolts loose and zipping the head bolts out. WHO PUT THESE IN HERE 10:29 Right science 10:55 Pulling the vlom and SOMEONE HAS BEEN HERE #deleted 11:59 Removing the lifters and trays.... yes, someone knows the way 13:05 Unbolting and removing the harmonic balancer, front cover and cam gear 14:57 Removing the cam plate screws andddd someone doesn't own a torque wrench 16:29 Pulling the camshaft out, Prying it out, and OH, yes I would do this too 19:53 Unbolting the blast basket to see what kind of engine dumplings are inside 21:07 Where is it, WHERE IS THE WRIST PIN! 23:06 Removing the dismantling the oil pump 25:21 Starting to unbolt all remaining 7 rods and pistons 27:33 Pushing the final piston out then unbolting the main caps and plucking the crankshaft out 28:35 Full rotating assembly inspection including rods, rings, bearings, pistons, bores, block and crank. This is an odd one! 33:22 Summary
Not rated yet