Skip to main content
AmigoFish

I Do Cars

I Do CarsVideo

Format:
YouTube channel
New videos:
Several times a week
Typical length:
about 40 minutes, not counting Shorts
Latest video:
Not rated yet

About this show

Welcome to my channel, I Do Cars. Its an answer to the awkward question "So what do you do?". On my channel you'll find videos of the dumb and overzealous car projects I take on personally. You'll also find videos of getting cars running that are either wrecked, or have been sitting for a long time. There will be some how-to repair videos as well because showing people how to fix their vehicle themselves is what I love to do. Of course, you'll find engine teardown videos. Lots, and lots of engine teardown videos. One a week, at least. I own and run an auto salvage operation and part of our model is tearing down bad or core engines and selling the parts. Taking these engines apart is just another day in the office, so I'm happy to bring you along!

Contact info: Non parts buying email: Mazdamiester@gmail.com To buy parts email: Importapartsales@gmail.com

Mailing address Importapart C/O I Do Cars 7373 Hazelwood Ave Hazelwood MO 63042

Videos come from the channel's public YouTube feed. The artwork is the newest video thumbnail. Last updated . Names, artwork and text belong to their publishers.

Cosmos

Rated alike

Similar by topic and creator

  • Pocket Racers
    Shares the topics Cars and Motoring and How-To and DIY.
  • carwow
    Shares the topics Cars and Motoring and How-To and DIY.
  • Glint
    Shares the topics Cars and Motoring and How-To and DIY.

See the full Cosmos

Similar shows

See all Cars and Motoring shows

Explore more

Videos

  • WHO WOULD FIX THIS TRUCK? ME, And Here's How I Rebuilt this Totaled GMC Sierra 2500!

    · 42 min

    For parts visit www.Importapart.com or www.Pro-rebuild.com This video is long overdue, and it's how I rebuilt my now current personal work truck, a 2011 GMC Sierra 2500. This was a wrecked and totaled truck at copart that I won last year. I bought with the intentions of parting out but once it came in and I saw how clean it was, I decided to fix it and replace my 2010 Silverado 2500. For More I Do Cars content, check out my wife's channel @TheCarWifeLife For AWESOME car shirts like the ones I wear, visit blip shift here: https://www.blipshift.com/?utm_source=i-do-cars&utm_medium=affiliate This is a high mileage truck, however it had one important thing. No rust. None on the bed. none in the rockers. It was clean and pretty well cared for. I waited for a bit, just long enough to find the parts cheaply as there wasn't an urgency to fixing this truck but once I had everything together this is the process of fixing it. First order was to get the knuckle and wheel back under it so it could drive. Then to fix the body which all unbolted. I did film this over several months and a follow up very recently. I have since put nearly 10K miles on this truck and drive it every other day. I own and run an auto salvage business called Importapart. We dismantle a lot of GM trucks as well as all makes and models so buying this was right inline with our normal inventory. Ultimately, I saw something in this truck that perhaps most others would not but I have NO regrets. Even if it's not perfect or as nice as a new one, it wasn't as expensive and still fulfills my needs of hauling engines and towing cars. As always I hope you enjoyed this video. I love all of the comments, feedback and even the criticism. Catch you on the next one! -Eric

    Not rated yet
  • FAKE “Auto parts stores” are just brokers marking up and lying about used parts! #informedconsumer

    · 2 min

    I’m Eric and I own and run Importapart, a REAL auto salvage business in the Saint Louis area. In the nether regions of this industry lies a rather topical genre of auto parts “stores”

    Not rated yet
  • This Hemi Engine FAILED TWICE! Mopar Reman DEAD! 2015+ Ram 2500/3500 6.4L V8 Engine Teardown

    · 36 min

    For parts go to http://www.Importapart.com or email us at Importapartsales@gmail.com. You can also visit our sister site http://www.Pro-Rebuild.com Today we have the biggest of Chrysler Hemi V8's on the stand, the Mighty 6.4L from a 2015-2024 Ram 2500 or 3500. This is a MOPAR REMAN and here it is, dead again! So what happened? Was it the owner or drivers fault, a design flaw or perhaps being a reman, was something done incorrectly? Thats what this video will hopefully discover. On another note, these are extremely expensive core engines due to demand. The higher cost core engines are MUCH riskier especially since I don't always know what's wrong with them. Spending 4-digits on these cores in the hopes to profit by selling parts is always a gamble, especially being a reman unit. For More I Do Cars content, check out my wife's channel @TheCarWifeLife For AWESOME car shirts like the ones I wear, visit blip shift here: https://www.blipshift.com/?utm_source=i-do-cars&utm_medium=affiliate Every week I post a new teardown video of a blown up or suspected bad engine. Check out a few of my favorites! The WORST Damage EVER on the channel: https://youtu.be/Ot-GbhaeaDw The least reliable modern engine: https://youtu.be/0yx1-50iqnA Antiquated technology Bentley 6.75litre exploded https://youtu.be/4dUZ-yHik7A Why do I do this? My name is Eric and I own and run Importapart, a full service auto recycling business. Part of our model includes buying and dismantling core, bad, and broken engines to salvage the good parts and recycle the rest. We do not rebuild engines, merely supply parts to those who do. As always I hope you enjoyed this teardown. I love all of the comments, feedback and even the criticism. Catch you on the next one! -Eric 00:00 Intro 02:23 Pulling the coils 02:45 16 Spark plugs make a lovely light 03:46 The intake ports look fi.... wait that's a bolt 05:04 Peeling off the RH Valve cover, the valvetrain is meh? 06:10 Cracking the rocker arm bolts loose, there's trouble here. 07:45 The pop of those head bolts... 08:01 Ripping the head off and our first look at the pistons and bores... not great 10:53 Unbolting the LH Valve cover, this side looks ok, until you look at it. 11:54 There's oil in the metal! 12:46 Zippin & a crackin' but there's some torque specs a lackin' 13:42 This bank of bores is slightly better but there's a problem 14:54 SCIENCE 16:14 Turning the engine over to zip the oil pan off 16:57 THAT DOESN'T GO THERE 18:39 The worst offender 19:03 Stripping the front of the engine to get the timing cover, including the blessed water pump 19:53 I'm doing it wrong 20:39 Unbolting the oil pump and tearing it down. 22:06 Removing the infamous hemi lifters 22:39 WHAT. HOW. 23:30 Sliding the cam out.... I said sliding the. cam. out. 25:23 Unbolting and pushing all of the rods and pistons out 27:54 Removing the oil filter and oil cooler housing 28:33 Zipping the main cap bolts out and plucking the crankshaft out 29:30 Full rotating assembly inspection, bores, block, crank, bearings, rods, pistons, rings 34:06 Summary

    Not rated yet
  • IS IT SAVABLE? Chevrolet Camaro 6.2L Engine Parts Cleaned Up & Inspected After 4 Years Under Water!

    · 17 min

    For parts email us at importapartsales@gmail.com or visit www.Importapart.com. THE STORY: https://youtu.be/wn4idALwjgc THE ENGINE TEARDOWN: https://youtu.be/S-CjBlYw_Fo THE TRANSMISSION TEARDOWN: https://youtu.be/ZmSzU6TfdVg This is the final video of the under water L99 series. This was an engine and transmission from a car that was submerged in the Ohio river for 4 years. I tore everything down and in this video we wash and clean all of the parts to get a better look at what kind of work they would need to be usable. So WHY am I doing this? My name is Eric and I own and operate Importapart, a full service auto dismantler. Part of our model includes buying bad, blown and broken engines, tearing them down and selling the good parts while recycling the rest. We do not rebuild engines, simply supply parts to those who do! We process a large amount of LS based engines which is why I agreed to buy this under the pretense that it was a "flood" engine. For More I Do Cars content, check out my wife's channel @TheCarWifeLife For AWESOME car shirts like the ones I wear, visit blip shift here: https://www.blipshift.com/?utm_source=i-do-cars&utm_medium=affiliate Every week I post a new teardown video of a blown up or suspected bad engine. Check out a few of my favorites! BUSTED BENTLEY 6.75Litre V8 Teardown https://youtu.be/4dUZ-yHik7A Incredible damage Ram 8.0 V10 https://youtu.be/Ot-GbhaeaDw Ford V10 with lots of holes https://youtu.be/2BYu9Cbhb4g As always I hope you enjoyed this teardown. I love all of the comments, feedback and even the criticism. Catch you on the next one! -Eric

    Not rated yet
  • Just HOW BAD Is It? This 6L80e Spent 4 Years In The Ohio River, Let's Tear IT DOWN!

    · 41 min

    For parts visit http://www.Importapart.com OR http://www.Pro-Rebuild.com Here's the story: https://youtu.be/wn4idALwjgc Here's the Engine Teardown: https://youtu.be/S-CjBlYw_Fo You guys asked, so here we are! This is the 6L80e transmission from the infamous "flooded" Camaro engine I tore down. This transmission is from a purportedly "stolen" 2011 Camaro SS dumped in the Ohio river in 2020, and then recovered in 2024. After 4 years in the Ohio, and then 2 more years above ground, how will this come apart? What kind of condition was this in before it went under? The answer to those questions and many others is what we aim to get in this teardown. For More I Do Cars content, check out my wife's channel @TheCarWifeLife For AWESOME car shirts like the ones I wear, visit blip shift here: https://www.blipshift.com/?utm_source=i-do-cars&utm_medium=affiliate Every week I post a new teardown video of a blown up or suspected bad engine or transmission. Check out a few of my favorites! Subaru CVT Teardown https://youtu.be/AmMbJYCHjOE MEGA Destruction. Ford V10 Teardown https://youtu.be/2BYu9Cbhb4g Another TRASHED 3.6L Pentastar https://youtu.be/IAmkd1U8XoQ Why do I do this? My name is Eric and I own and run Importapart, a full service auto recycling business. Part of our model includes buying and dismantling core, bad, and broken engines to salvage the good parts and recycle the rest. We do not rebuild engines, merely supply parts to those who do. As always I hope you enjoyed this teardown. I love all of the comments, feedback and even the criticism. Catch you on the next one! -Eric

    Not rated yet
  • Absolute JUNK? This 2023 Nissan Rogue 1.5L VC-Turbo Engine FAILED At Just 43,000 Miles!

    · 42 min

    For parts visit http://www.Importapart.com or http://www.Pro-Rebuild.com Today we have yet ANOTHER failed 1.5L variable compression engine from a 2023 Nissan Rogue. This is the THIRD KR15DDT I've had on the channel and their premature failure is becoming unsurprising. There are currently two recalls on this engine, the main one covering the connecting rod bearings but if there's one thing I've learned tearing down so many engines, any engine can fail in any way. So, with 43K miles on the clock, what happened to this one? Why was this replaced instead of repaired? These are all questions we will hopefully answer in this teardown. The KR15DDT is a 1.5L turbocharged direct injected 3 cylinder engine with Variable compression, a system that only Nissan offers. It makes just over 200hp and comes in the 2021+ Nissan Rogue For More I Do Cars content, check out my wife's channel @TheCarWifeLife For AWESOME car shirts like the ones I wear, visit blip shift here: https://www.blipshift.com/?utm_source=i-do-cars&utm_medium=affiliate Every week I post a new teardown video of a blown up or suspected bad engine. Check out a few of my favorites! Ford 1.0 3 cylinder ecoboost teardown https://youtu.be/0yx1-50iqnA Ford 1.5L 3 cylinder ecoboosr, better? https://youtu.be/CEzqz8C4lxw Honda fit 1.5L TOTAL meltdown https://youtu.be/JK_ZyKh2Nyc Why do I do this? My name is Eric and I own and run Importapart, a full service auto recycling business. Part of our model includes buying and dismantling core, bad, and broken engines to salvage the good parts and recycle the rest. We do not rebuild engines, merely supply parts to those who do. As always I hope you enjoyed this teardown. I love all of the comments, feedback and even the criticism. Catch you on the next one! -Eric 00:00 Intro 02:27 unbolting and removing the intake manifold and looking at the intake ports 03:06 Peeling off the valve cover... uh oh? 06:32 Clearing the timing cover 07:57 unbolting the timing cover and inspecting the timing system 08:51 ITS POOP AGAIN 09:57 cramming the cam caps loose and removing the camshafts 11:14 Inspecting the cams, journals and cam caps 12:00 cracking the headbolts loose, they are not the same 12:50 lifting the head, then GETTING IN DEEP with inspections 16:27 SCIENCE, then rolling the engine over to pull the...TAPIOCA PAN? 17:51 removing the VC actuator 19:04 BOOP 19:30 dismantling the oil pump for inspection 20:51 Variable Compression in action 23:10 Dismantling the rotating assembly & BREAKING MY RATCHET 25:41 Unbolting the links and pushing the pistons out 29:02 Full inspection of bearings, crank, shaft, links, pistons, rings, bores 32:07 NOPE, WE AINT DONE YET 39:11 Summary

    Not rated yet
  • SECONDS FROM DISASTER? Porsche 944 Engine Teardown. SO MANY Problems, This would've been a RETURN!

    · 36 min

    For parts visit www.Importapart.com or www.Pro-rebuild.com TEARING DOWN SOMETHING DIFFERENT TODAY FOLKS! This is a 40 year old Porsche 944 engine that came from a wrecked car I bought at the copart auction. When we got this car into inventory, we couldn't get it to run and subsequently, it failed a compression test. That was 2+ years ago and today I finally get it on the stand to tear it down and find out just how bad this engine is and if we made the right call. This 2.5L SOHC 4 cylinder engine, known as the M44.02, came in early Porsche 944's and produced about 150hp, pretty stellar for its time. Although the vehicle this came from showed 53K miles, the 944's from this era only had 5 digit odometers AND this engine has signs that it's been out before and may be unoriginal to the vehicle. This is one of those situations where the engine may have run with a little bit of effort but there were too many red flags to feel good about proceeding, once it failed a compression test, it made much more sense to dismantle this engine. For More I Do Cars content, check out my wife's channel @TheCarWifeLife For AWESOME car shirts like the ones I wear, visit blip shift here: https://www.blipshift.com/?utm_source=i-do-cars&utm_medium=affiliate Every week I post a new teardown video of a blown up or suspected bad engine. Check out a few of my favorites! Bentley/Rolls 6 3/4 Litre Teardown https://youtu.be/4dUZ-yHik7A Porsche Boxster S M96 Teardown https://youtu.be/qrkALiq5hTU Lamborghini Hurrican Performante V10 Teardown https://youtu.be/qhH30G7980I Why do I do this? My name is Eric and I own and run Importapart, a full service auto recycling business. Part of our model includes buying and dismantling core, bad, and broken engines to salvage the good parts and recycle the rest. We do not rebuild engines, merely supply parts to those who do. As always I hope you enjoyed this teardown. I love all of the comments, feedback and even the criticism. Catch you on the next one! -Eric 00:00 Intro 03:44 Pulling the spark plugs, how do they look? 04:22 Checking the timing the best I can 06:14 Unbolting the intake manifold and checkout the intake ports 08:05 Removing both exhaust manifolds, one of these ports look WET 09:48 Dismantling the timing belt and balance shaft belt systems, she's a process 11:01 Cracking the camshaft housing bolts loose 12:46 UHHHH OHHHH that's bad 14:27 Cracking the head nuts loose and yoinking the cylinder head 15:50 Precision science 17:43 Removing the oil filter housing and oil cooler and... 18:20 DUN DUN DUN, WHO DUN THIS 19:30 Unbolting the water pump, is it still good? 21:00 Rotating the engine upside down to pull the oil pan 21:21 Unbolting the oil pan, and... 21:45 HOW THE HECKIN SHPRECKEN 23:58 Cracking the rod cap nuts loose and driving the rods and pistons out of their bores 25:32 Removing brackets and one of the balance shafts 26:53 Unbolting the oil pump, and dismantling it to check for damage 29:15 Zipping out the main cap plate bolts and plucking the crankshaft out 30:04 Complete rotating assembly inspection including crankshaft, rods, bearings, rings, pistons and of course, the block 32:44 Summary

    Not rated yet
  • My Brother's WILD Mazda Collection. Imported, Ultra-Rare, Vintage & Modified!

    · 16 min

    https://bringatrailer.com/listing/1979-mazda-titan-widelow/?fbclid=IwY2xjawTBCJdleHRuA2FlbQIxMQBzcnRjBmFwcF9pZBAyMjIwMzkxNzg4MjAwODkyAAEeaeJTUx_pr2pXK-saIloabddaaovFkiC9MRZQHTJB0Ng4T56Oed30iL4tjsQ_aem_aY7J6jS6zVHDiQFSr-qc9Q My brother is kind of a Mazda fanatic. I've been thinking about making a video showcasing his collection of both domestic and imported Mazda's and there's no better time than now since he's actually going to sell one, maybe even two! My brother, like I, don't often let things go out of our hoard of vehicles so it's a pretty rare chance. Both my brother and I grew up in a Mazda-only house (with a few short exceptions) and while I was able to break free from the confines of the brand, My brother Ryan stayed true to the Mazda way. The problem? Not all of the cool and useful Mazda's made it to North America. Here is his collection of vintage, ultra-rare, imported and modified Mazda's that he has procured over the last 20+ Years. I hope you enjoyed this video. As always I love all of the comments, feedback and even the criticism. Catch you guys on the next video! -Eric

    Not rated yet
  • Tearing Down A DESTROYED Mitsubishi Evolution 4B11T Engine. This Thing Was A TICKING TIME BOMB!

    · 33 min

    For parts go to www.Importapart.com or www.pro-rebuild.com Today we are tearing down a Mitsubishi 4B11T from a 2008 Lancer Evolution that was installed in a Ralliart I bought at the auction, wrecked. Copart advertised this as "engine start program" which means the engine ran.... HOWEVER as you can see, even a blind wombat would have noticed the GIANT HOLE in the block. So how did this happen? How did the engine, which was at one point bad, end up in another WRECKED car, and bad again? In this video, I'm going to tear this jaded 2.0L Turbo 4 cylinder engine down to see just what happened, and hopefully get a few parts to salvage and cover the loss of an expensive engine I didn't get. For More I Do Cars content, check out my wife's channel @TheCarWifeLife For AWESOME car shirts like the ones I wear, visit blip shift here: https://www.blipshift.com/?utm_source=i-do-cars&utm_medium=affiliate Every week I post a new teardown video of a blown up or suspected bad engine. Check out a few of my favorites! BUILT Subaru STI Engine MEGA FAILURE https://youtu.be/JKHCoLItvT4 Genesis 2.0L Theta II Turbo Teardown https://youtu.be/_FQhFtJ1VGY 2 year old Honda ENGINE ruined by lube shop https://youtu.be/ajbUbwOi5Fs Why do I do this? My name is Eric and I own and run Importapart, a full service auto recycling business. Part of our model includes buying and dismantling core, bad, and broken engines to salvage the good parts and recycle the rest. We do not rebuild engines, merely supply parts to those who do. As always I hope you enjoyed this teardown. I love all of the comments, feedback and even the criticism. Catch you on the next one! -Eric 00:00 Intro 01:48 Pulling coils and plugs. No trouble here? 02:35 Unbolting the intake manifold and peeking down the intake ports 04:03 Zipping the valve cover off, MY MY MY look how nice! 05:20 Removing the crank pulley and timing cover 06:37 Inspection and removal of timing system 09:45 Cramming the cam cramps loose, removing cams and inspecting valvetrain 11:25 Cracking the head NUTS loose, and lifting the head 13:01 Well, that's bad 14:20 SCIENCE. I CALL CHEATING! THIS SHALL NOT PASS THE TEST 16:02 Unbolting the BLAST pan and inspecting the debris field 18:49 How bad is it? Well, its dead, Jim 20:11 Unbolting and dismantling the oil pump. SCREEN IS TRASHED 22:41 Removing the lower block half 24:26 Freeing the orphaned connecting rod 24:49 Unbolting the rest of the rods and pistons, and pulling the crank 26:40 Full rotating assembly inspection, block, bores, crank, rods, bearings, pistons, rings. Someone's been here! 30:09 Summary

    Not rated yet
  • The GMT400’s are some of the best trucks ever made! Would you look at the interior?

    · 1 min

    Fresh inventory usually makes me happy but this truck takes me back to simpler times. Crank windows. Velour interior. Simple, as trucks should be. This ‘94 350/2wd auto is now fully inventoried @ImportapartSales Email us at importapartsales@gmail.com or go to www.importapart.com for parts

    Not rated yet
  • This LS Spent 4 YEARS In A River! Will It Come Apart AND What Survived? REEKS of Insurance Fraud!

    · 59 min

    For parts go to www.Importapart.com or www.Pro-rebuild.com This teardown will be one to remember! Today we make an attempt to completely dismantle the engine out of a 2011 Camaro that was STOLEN and DUMPED in the Ohio river where it sat for nearly 4 years! Will it come apart? What parts survived? But most importantly, will we find anything that raises an eyebrow and answers questions to WHY this Camaro was in the river in the first place? We find out a LOT of things during this teardown and I think you'll all be surprised. This engine is an L99, which is a 6.2L V8, basically the LS3 with Active Fuel Management installed. This makes just over 400hp in stock form and works well powering things above water, not so much under water. For More I Do Cars content, check out my wife's channel @TheCarWifeLife For AWESOME car shirts like the ones I wear, visit blip shift here: https://www.blipshift.com/?utm_source=i-do-cars&utm_medium=affiliate Every week I post a new teardown video of a blown up or suspected bad engine. Check out a few of my favorites! 4.6L Mustang 3v V8 Teardown https://youtu.be/PFOSJAi0Rt4 Rolls Royce/Bentley 6.75Litre Disaster https://youtu.be/4dUZ-yHik7A RUSTED SOLID 4.5L Land Cruiser https://youtu.be/f4WguiCUW0c Why do I do this? My name is Eric and I own and run Importapart, a full service auto recycling business. Part of our model includes buying and dismantling core, bad, and broken engines to salvage the good parts and recycle the rest. We do not rebuild engines, merely supply parts to those who do. As always I hope you enjoyed this teardown. I love all of the comments, feedback and even the criticism. Catch you on the next one! -Eric 00:00 Intro 03:50 Draining the engine of... river 07:19 Getting the spark plugs out and draining the....river 09:32 Unbolting the intake manifold and looking down the intake ports at the...river 12:42 Removing the water pump, feels redundant 14:51 Peeling off the LH Valve cover. How does the valvetrain look? 17:26 Cracking the head bolts loose and pulling the head off of the block. 18:27 HOW? JUST HOW? 21:18 What's under the other valve cover? 21:59 FOUL! FOUL! FOUL! I CALL A FOUL! 23:26 Yanking the RH Cylinder head and HOLY MOLY, that's what I expected. GAROOSSSSS 26:52 Trying to remove the balancer and the timing cover 28:27 Pulling the lifters out 29:08 Well that smells fishy 30:34 Sliding the Slime Stick out of the block 32:25 Trying, JUST TRYING to remove the transmission from the engine 33:51 MY NAME IS MUD 35:17 Lifting the engine to get to the oil pan bolts 38:01 OIL PAN BOLT BOOGALOOZA 40:02 Inspecting the oil pan, and the schmooze in the oil pan 42:12 Removing the stopper, formally known as the starter 43:01 Unbolting the first rod cap. Can we get this out of the bore? 43:24 MACHINIST 44:38 3 RUSTED pistons removed, will the crank turn? 45:39 Removing the rest of the rods and pistons 46:35 Trying to get the torque converter and rust plate out 49:48 Looking over the spoils of my work. Can any of this be used again? 52:32 Summary

    Not rated yet
  • DID I GET SCREWED? This "FLOOD" Camaro 6.2L V8 Has A WILD STORY! Will It Be The WORST Teardown EVER?

    · 11 min

    For parts visit www.Importapart.com or www.pro-rebuild.com I was sold this engine and transmission from another salvage business under the premise that it was a "flood" car. I routinely buy blown up engines to dismantle for parts and I've even bought several from flood cars both fresh AND salt water. This looked worse. Worse than ANY engine I've seen. I bought this sight unseen, left a check on the counter and this was dropped off when I was out of the shop. When I got back and laid eyes on this.... blob, I was a little less than thrilled. That was 1 year ago and now I'm ripping the bandaid off and we are going to tear this down and see what I can salvage from it. BUT FIRST, lets figure out what its from, and maybe there's more to the story. This video covers how I uncovered a pretty wild story that MADE THE NEWS! After learning the details on this, I've decided to break the story off of the actual teardown. I felt doing this all in one video would make it incredibly long and I would have to omit details that you viewers may want to know. The next video will be the teardown! Will it come apart? Will ANYTHING be salvageable after being subjected to what this engine went through? You'll have to wait and see! For More I Do Cars content, check out my wife's channel @TheCarWifeLife For AWESOME car shirts like the ones I wear, visit blip shift here: https://www.blipshift.com/?utm_source=i-do-cars&utm_medium=affiliate Every week I post a new teardown video of a blown up or suspected bad engine. Check out a few of my favorites! DESTROYED 454 Big Block Chevy Teardown https://youtu.be/E4sLW8cFcI8 Dodge Ram 8.0L V10. THE WORST ONE https://youtu.be/Ot-GbhaeaDw Ford 6.8L 2V V10 Teardown https://youtu.be/2BYu9Cbhb4g Why do I do this? My name is Eric and I own and run Importapart, a full service auto recycling business. Part of our model includes buying and dismantling core, bad, and broken engines to salvage the good parts and recycle the rest. We do not rebuild engines, merely supply parts to those who do. As always I hope you enjoyed this teardown. I love all of the comments, feedback and even the criticism. Catch you on the next one! -Eric

    Not rated yet
  • Tearing Down an 8.1L BIG BLOCK CHEVY V8 That I Pulled From The Scrap Bin. Why was this thrown away?

    · 39 min

    For parts visit www.Importapart.com or www.Pro-Rebuild.com Today we have the BIGGEST of big block chevrolet engines, the 496ci Vortec 8100. I found this engine at the BOTTOM of a scrap bin and dug it out so I could bring it home and tear it down. Why was it in the scrap bin, how did it get there and more importantly, what was this out of? These are all things we aim to find out in the video as I tear this video down to a bare block to find all of its issues. The 8.1L L18 Engine debuted in 2001 for the GMT800 platform of GM trucks, offered in 3/4 and 1 ton Silverado, Sierra. Avalanche and suburban/Yukon XL 2500. These engines were also installed in medium duty trucks and step vans as well as generators! These engines are built from the same architecture as their predecessor, the 454 or vortec 7400. Producing 340hp and 455lb ft of torque in factory form, you can imagine how well they tow! For More I Do Cars content, check out my wife's channel @TheCarWifeLife For AWESOME car shirts like the ones I wear, visit blip shift here: https://www.blipshift.com/?utm_source=i-do-cars&utm_medium=affiliate Every week I post a new teardown video of a blown up or suspected bad engine. Check out a few of my favorites! DESTROYED 454 Big Block Chevy Teardown https://youtu.be/E4sLW8cFcI8 Dodge Ram 8.0L V10. THE WORST ONE https://youtu.be/Ot-GbhaeaDw Ford 6.8L 2V V10 Teardown https://youtu.be/2BYu9Cbhb4g Why do I do this? My name is Eric and I own and run Importapart, a full service auto recycling business. Part of our model includes buying and dismantling core, bad, and broken engines to salvage the good parts and recycle the rest. We do not rebuild engines, merely supply parts to those who do. As always I hope you enjoyed this teardown. I love all of the comments, feedback and even the criticism. Catch you on the next one! -Eric 00:00 Intro 03:26 Removing and inspecting spark plugs 04:00 Unbolting the intake manifold and looking down the intake ports 05:21 Peeling off the LH Valve cover, My, what big rockers you have 06:00 How does the RH Valvetrain look? 08:43 Craming the LH Rocker arms loose, and pushing the pull rods 10:00 Unbolting the LH Cylinder head. Pistons look a little 'sus' 14:31 Crammin the rocker arms loose on the right cylinder head. All the pushrods look great! 15:29 Zipping the right cylinder head bolts out and lifting the head 17:01 This side doesn't look too bad 18:03 ALL THE SCIENCE 18:59 Removing the lifters is fun. So fun. Had a great time. 20:50 Why don't. modern lifters last like they did 20 years ago? 22:30 Removing the crank pulley and front timing cover 24:15 Pulling the camshaft out and inspecting it for damage and wear 25:21 Zipping out the oil pan bolts and removing it. Yuck, but bad? meh 26:36 Removing and dismantling the oil pump. super simple 27:58 Unbolting and removing the first two rods and pistons 30:52 Pushing the last two rods and pistons out 31:21 Zipping the main cap bolts out and plucking the crankshaft out 31:55 Complete rotating assembly inspection on this 8.1. Crankshaft, bearings, rods, pistons, rings and block. 35:23 Decoding the block 35:48 Summary

    Not rated yet
  • BMW Sitting for 15 YEARS? I dragged home this E36 318Ti from a shop FULL of 50+ years of Hoarding!

    · 2 min

    I NEEDED MORE PROJECTS 🙃 A good buddy bought a repair shop owned by the same guy since the late 60’s and inherited EVERYTHING with the purchase. Included are about 40 old cars some sitting 20 years! This 1996 bmw 318Ti was just one, the easiest one to grab, was the first one I decided to bring back to @ImportapartSales I’ll make a video trying to get this running but it’s pretty rusty underneath so most likely we’ll be dismantling it. In the coming weeks and months I’ll have many more videos on this place including dragging more good stuff back!

    Not rated yet
  • THE MOST RELIABLE GM ENGINE RUINED! This 3800 V6 Put Up With Problems MODERN Engines COULD NEVER!

    · 36 min

    To buy used parts for your car or truck, visit www.Importapart.com OR www.Pro-Rebuild.com Today we are tearing down one of my favorite engines of all time, the GM 3800. Specifically, this is the L36, the series II 3.8L V6 out of a 2000 Buick Lesabre with a mere 141,226 miles. This engine was donated by Keith, a loyal viewer who also sent me a video of it running along with a backstory of this engines final miles. The 3.8L is regarded as one of the most reliable GM engines of all time. These engines do have weak points but they are relatively tolerant of abuse, easy to service, make excellent power and get pretty good fuel economy for their size. GM put these engines in many front wheel and rear wheel drive vehicles from the 70's through the late 2000's. For More I Do Cars content, check out my wife's channel @TheCarWifeLife For AWESOME car shirts like the ones I wear, visit blip shift here: https://www.blipshift.com/?utm_source=i-do-cars&utm_medium=affiliate Every week I post a new teardown video of a blown up or suspected bad engine. Check out a few of my favorites! DESTROYED GM 5.7L Vortec 350 V8 Teardown https://youtu.be/pn1ypZErZAs Junk GM L87 6.2L Recall teardown https://youtu.be/ohGx0xIanNY The 3800's replacement, 3.6 LLT "High Feature" Mega Failure https://youtu.be/hL0QE4mTANU Why do I do this? My name is Eric and I own and run Importapart, a full service auto recycling business. Part of our model includes buying and dismantling core, bad, and broken engines to salvage the good parts and recycle the rest. We do not rebuild engines, merely supply parts to those who do. As always I hope you enjoyed this teardown. I love all of the comments, feedback and even the criticism. Catch you on the next one! -Eric 00:00 Intro 03:13 Removing the front valve cover and OHHHH MYYYY 04:04 As if you thought the rear would be any better 04:31 Unbolting and removing the lower intake manifold. Yep, those are bad 06:52 Cracking the rocker arms loose and removing valvetrain on front head. ITS SCHMOO CITY 07:48 Cracking the head bolts loose, and yanking the front(left) cylinder head. 10:19 Front Science, then onto the rear rockers and pushrods 10:53 How to tell your pushrods and rocker arms are bad 11:11 Make a wish *I wish for my tools to survive this fiasco* 11:30 Cracking the rear head bolts loose, and yanking the cylinder head 13:32 Rear science. IT PASSED THE TEST! 13:55 Trying to remove the lifters and FAILING 14:35 Removing the water pump for its next life 16:15 turning the engine over to remove the oil pan 16:50 Ohhhhhh nooooooo that oil pickup 18:36 Unbolting and removing the front timing cover, and inspecting the oil pump 21:15 Removing the timing chain, cam gear, balance shaft and camshaft 23:23 Unbolting and removing the first two rods and pistons 24:13 This might be yer problem 25:16 Pushing the last two rods and pistons out then unbolting the main caps 26:02 The main caps need some extra force to be free 26:48 knocking the lifters out, still better than anything made today 27:27 Full lower end inspection! Rods, Bearings, Pistons, rings, lifters, camshaft, crankshaft, block and bores. This engine put up a fight! 32:49 Summary

    Not rated yet
  • RECALLED 2020 Honda Odyssey J35 V6 Engine FAILED But the Customer HAD TO PAY! They Won't Cover THIS!

    · 37 min

    For parts visit www.Importapart.com or email us at Sales@importapart.com Today we are tearing down the 3.5L J35Y7 V6 from a 2020 Honda Odyssey with roughly 85k miles. This engine is part of the recall where the dealer inspects and replaces rod bearings as necessary. However, while this engine is part of the recall campaign, this replacement was NOT covered! Why might you ask? Well that's what this teardown will hopefully answer. How did this engine fail? Was it related to the faulty rod bearings or was it something else? The J series V6 has been around since the mid 90's and has proven to be one of the most reliable Honda engines EVER produced. The earliest versions of these engines were by far, the best, often lasting 400-500K miles without issues. Once Honda implemented systems like VCM or variable cylinder management, the reliable dropped but these can still last quite a while with proper care. The J35Y6/Y7 comes in the Acura TLX, Honda Passport, Honda Odyssey, Honda Ridgeline and the Honda Pilot. From its current configuration, it produces 280hp and 262lbft of torque but versions of J series engines have made well over 300hp in the past. For More I Do Cars content, check out my wife's channel @TheCarWifeLife For AWESOME car shirts like the ones I wear, visit blip shift here: https://www.blipshift.com/?utm_source=i-do-cars&utm_medium=affiliate Every week I post a new teardown video of a blown up or suspected bad engine. Check out a few of my favorites! THE WORST BLOWN J35 I've EVER SEEN https://youtu.be/jKmNNBLfFlY Acura Integra B18B1 DESTROYED https://youtu.be/Q1-JhJUGrSo 30K On ONE oil change? Honda CRV 1.5 RUINED https://youtu.be/xVxF_kTkTFs Why do I do this? My name is Eric and I own and run Importapart, a full service auto recycling business. Part of our model includes buying and dismantling core, bad, and broken engines to salvage the good parts and recycle the rest. We do not rebuild engines, merely supply parts to those who do. As always I hope you enjoyed this teardown. I love all of the comments, feedback and even the criticism. Catch you on the next one! -Eric 00:00 Intro 03:11 Pulling coils and spark plugs for inspection 03:49 How dirty are the intake ports after 85K of direct injection? 04:23 Peeling off both valve covers, it's pretty clean! No signs of trouble here 06:04 Removing the crank pulley and timing covers. Appears to be original in here. 08:32 Cracking the front head bolts loose, and yanking the head 09:50 Front science 10:06 Cracking the rear head bolts loose, TEARING the head off and making a mess. 11:19 RUST :( This engine was for sure outside for a bit 11:56 Rear science 13:17 Unbolting the religious oil pan 14:26 ITS A DAG-GONE COPPER MILL 16:30 Removing the oil pickup and windage tray, first look at rotating assembly 17:23 Spinning the oil filter off and unbolting the oil pump to dismantle 19:17 Loosening the first two rods and pushing pistons out of their bores 21:27 Cracking? the last two rods loose. Why are these loud? 21:52 Zipping out the main cap bolts and removing two main caps 22:21 WHY ARE THESE SO STUCK! 24:56 Full rotating assembly inspection. SHEESH, what has happened here? The bearings, the crank, THE BLOCK. BAAAAADDD 30:25 Pulling one head apart so we can check for damaage 32:00 D'aaawwwwwww 32:13 Summary

    Not rated yet
  • Rescued 1989 Trans Am GTA! Its DONE! First Drive in 17 Years. So THAT's Why It Was Parked In A Field

    · 59 min

    For parts who to www.Importapart.com or www.pro-rebuild.com For more content on this car and other I Do cars content, check out my wife's channel @TheCarWifeLife ITS ABOUT TIME EH?? This is the 1989 Pontiac TransAm GTA that I "rescued" from the salvage auction last year. In past videos, we got the car to start, got it to run well. Fixed the steering, and some suspension, some of the brakes. In this video, we try to make the final push to get it to be able to drive for the first time in 17 years since it was parked. We tackle the rest of the suspension and the dreaded brakes. The brakes on this car have been easily the worst part mainly because the entire system needed attention and the parts that came with the car maybe weren't exactly right. Several things went awry trying to get the brakes to work, and I power through them with the best of my patience. So, with all of this work done, how will this car drive? Was it worth it? Do I have regrets or will I regret selling it? Why did I do this? My name is Eric and I own and run Importapart, a full service auto dismantler. I also have a strong lust towards 80's and 90's cars that were once commonplace but now are few and far between. Having to buy and bid cars from across the country to keep the business going I often run across cars like this. Sometimes the action is very clear, parts car or rescue mission. Did I make the right call here? For Car-Guy Shirts, click here: https://www.blipshift.com/?utm_source=i-do-cars&utm_medium=affiliate As always I love all of the comments, feedback and even the criticism. Catch you on the next one! -Eric Email is Mazdamiester@gmail.com. 00:00 Intro 04:54 SHOCKINGLY, the rear shocks are merely placeholders, lets replace them 09:32 Cutting off the swaybar end links and trying to get the rear brake lines free 15:49 KAPOW. Well that was cool 19:11 That was cool, let's do it again. KAPOW. Neat 21:21 Reassembling the rear brakes 30:15 Adding brake fluid to this DRY system for the first time in years 32:26 TRAGEDEDEDY 35:52 The fix 40:07 The problem with the fix, but the fix for the problem with the fix 43:08 Suckin' Air 45:40 Ladies and Gentlemen, I present, A BRAKE PEDAL 47:24 Installing wheels and bringing the transam back to earth 49:23 Pulling the Transam out of the garage on its power 50:37 FOOT SLIPPED 52:07 THE TEST DRIVE! 54:00 NNNNNNNOOOOOOOOOOOOOOO :( 55:22 Summary

    Not rated yet
  • 89 Pontiac GTA last registered in 2007 drives itself out of the garage!

    · 36 sec

    It’s almost done! Today I pulled the GTA out of the garage under its own power and brakes! This has been a year long project and the next video will be up soon!

    Not rated yet
  • 2021 Audi S4 EA839 3.0T V6 Engine Failure @47K miles! The Failure YOU CANNOT AVOID?

    · 40 min

    For parts go to www.Importapart.com or email us at Importapartsales@gmail.com Today we have an engine that SHOULD NOT be on my stand, but it is. This is the 3.0T EA839 CWGD V6 from a 2021 Audi S4 with 47K miles. This was replaced under warranty extension How do you keep this kind of failure from happening and are the new engines, or replacement engines fixed for good? or will those suffer the same fate? For more I Do Cars content check out my wife's channel at https://www.youtube.com/@TheCarWifeLife 034 Motorsports piston article https://www.034motorsport.com/blog/investigating-ea839-3-0t-engine-piston-failures-a-technical-review-of-root-causes-and-design-limitations/ For cool car related shirts, click here! https://www.blipshift.com/?utm_source=i-do-cars&utm_medium=affiliate Every week I post a new teardown video of a blown up or suspected bad engine. Check out a few of my favorites! Audi S6 5.2L V10 HORRIFIC FAILURE teardown https://youtu.be/AMj5bIRqiLE Lamborghini Hurracan Performante V10 Teardown https://youtu.be/qhH30G7980I Mercedes M278 Bi-Turbo V8 Failure https://youtu.be/ubMyWT49IWs Why do I do this? My name is Eric and I own and run Importapart, a full service auto recycling business. Part of our model includes buying and dismantling core, bad, and broken engines to salvage the good parts and recycle the rest. We do not rebuild engines, merely supply parts to those who do. As always I hope you enjoyed this teardown. I love all of the comments, feedback and even the criticism. Catch you on the next one! -Eric 00:00 Intro 02:07 Pulling the plugs for inspection. Not bad! 02:54 Removing the oil filter and checking for forbidden glitter 03:52 This Audi S4 ALREADY had the water pump replaced? SHEESH is this a BMW or something? 04:44 Turning the engine around and pulling the upper timing covers 06:25 Unbolting and removing the lower timing cover. This is MUCH simpler than the old supercharged 3.0 09:34 Stripping the timing system 12:38 Removing the fuel injectors and rail, and then cracking the valve cover bolts loose 14:18 First look at the valvetrain on the LH Head. Not great, but we've seen worse 16:25 Cracking the LH Head bolts loose and yanking the head 17:00 AHHH Well, this is what they do 18:30 Left science 19:17 Loosening the RH Valve cover bolts and inspecting valvetrain, much of the same 22:05 Cracking the RH head bolts loose 22:42 Just one side eh? Thats what I've read too 23:38 Right science 24:15 Zipping the crank bolt out, flipping the engine over and unbolting the lower oil pan 25:38 Unbolting the upper oil pan, front cover, removing the oil pump and dismantling it for inspection 28:33 Rotating the crank and starting to remove rods and pistons 29:41 Cracking the last two rod cap bolts loose 30:18 Zipping out the main cap bolts(kinda) and then being a barbarian to get the main caps out so I can remove the crankshaft 33:31 Complete rotating assembly inspection, rods, pistons, rings, crank, bores, block, bearings 36:44 Summary

    Not rated yet
  • Tearing Down TWO Broken Mazda 5-Speed Manual Transmissions from 15+ Years Ago. How Did These Fail?

    · 37 min

    For parts go to www.Importapart.com or email us at Sales@importapart.com. Today we have a change a pace, and we are tearing down TWO 5-speed front wheel drive transmissions from the 2nd generation ford probe GT, mx-6, 626 and mx3 V6. These transmissions are the "G" Mazda gearbox and are equipped in tons of front wheel drive vehicles from 1983 through 2008 or so. This pair of transmissions were installed in my friend's 1997 Probe GTS, and both of them are suspected bad. My friend cleared out his garage and had two of these bad transmissions that we broke some 15+ years ago. I say we, because I too, broke one of his transmissions. This video is just solely for entertainment, because I actually DO sell parts from these! Will the parts I can sell be nice enough to sell? I wanted to do something different from my normal engine teardowns which there will be another one coming up next week. For more I Do Cars content check out my wife's channel at https://www.youtube.com/@TheCarWifeLife For cool car related shirts, click here! https://www.blipshift.com/?utm_source=i-do-cars&utm_medium=affiliate Every week I post a new teardown video of a blown up or suspected bad engine. Check out a few of my favorites! GM 3.0 Duramax Teardown. BIG damage https://youtu.be/3g79j56AO3A Toyota Tundra Turbo V6 RECALL Teardown https://youtu.be/vL4tIHf_9i8 Lamborghini Hurrican V10 Teardown https://youtu.be/qhH30G7980I Why do I do this? My name is Eric and I own and run Importapart, a full service auto recycling business. Part of our model includes buying and dismantling core, bad, and broken engines to salvage the good parts and recycle the rest. We do not rebuild engines, merely supply parts to those who do. As always I hope you enjoyed this teardown. I love all of the comments, feedback and even the criticism. Catch you on the next one! -Eric 00:00 Intro 03:02 Removing the 5th gear/reverse pan from number1 04:19 Removing the same from the 2nd transmission, MUCH nicer 06:16 How to remove 5th gear shift fork, 5th gear and reverse 11:42 The second transmission looks normal woohooo 13:13 Zipping the bolts out of the case and splitting it on the first transmission. 14:32 Ohhhhh Nooooooo its chunky 16:42 Removing the input shaft, output shaft and differential. 20:18 YOU BLEW IT! 24:36 Splitting the case on the second transmission 27:32 Well, this transmission is the one that I broke, but there's a bit much metal on the magnet 28:27 Removing the guts from the second transmission... so why did this get replaced? 33:50 Summary

    Not rated yet