Skip to main content
AmigoFish

2022 Ford F-150 3.5L Ecoboost Fails At 180K In FOUR YEARS! Is the 3rd Gen The Best One Yet?

From I Do Cars · · 37 min

The player loads from YouTube only when you click. It uses YouTube's privacy-enhanced mode.

If the video does not play, the owner may have turned off embedding. Watch it on YouTube instead.

Watch on YouTube

Not rated yet

Description

For parts visit www.Importapart.com or email us at Importapartsales@gmail.com. Today we have the first 3rd generation 3.5L Ford Ecoboost I've had on the channel. This is the engine out of a 2022 F-150 Lariat with 180,000 miles. I was not told how it failed but I was told it likely still ran but was replaced. This truck was built 5/22 making this 180k attained in JUST 4 years! So how does a gen3 3.5 ecoboost fair after 180K? What ultimately caused this engine to be replaced and could this have been avoided? Thats what this video will hopefully prove as we completely tear down this engine and try to find a failure mode and perhaps a root cause.

For More I Do Cars content, check out my wife's channel @TheCarWifeLife

For AWESOME car shirts like the ones I wear, visit blip shift here: https://www.blipshift.com/?utm_source=i-do-cars&utm_medium=affiliate

Every week I post a new teardown video of a blown up or suspected bad engine. Check out a few of my favorites! 2nd gen ecoboost breaks a WHAT https://youtu.be/CfON7X5j6X0 Tundra 3.4L Twin Turbo 2026 replacement FAILED https://youtu.be/SqxThrmRPbU Ford 300 straight six teardown https://youtu.be/oJoiC03rxcg

Why do I do this? My name is Eric and I own and run Importapart, a full service auto recycling business. Part of our model includes buying and dismantling core, bad, and broken engines to salvage the good parts and recycle the rest. We do not rebuild engines, merely supply parts to those who do.

As always I hope you enjoyed this teardown. I love all of the comments, feedback and even the criticism. Catch you on the next one!

-Eric

00:00 Intro 02:19 Pulling the coils and plugs and inspecting 03:17 Unbolting the upper intake plenum and valve covers 04:28 Looks OK in here... but those new solenoids? #suspicious. 07:04 Removing the LH Turbocharger, spins good, but where's the other? 08:03 Striping the front timing cover, thermostat, water pump, crank pulley and idlers 09:27 Zipping out just a couple of timing cover bolts to reveal the timing system 10:24 Inspecting the timing system and checking out the intake valves with dual injection 11:55 Removing all of the timing system parts, tensioners and rails, Ope, broke it. 14:03 BIG UH OH! 14:49 Cramming the cam craps loose, pulling camshafts and inspecting heads 16:29 Cracking the LH head bolts loose, and ripping the head off. SO MUCH CARBON 18:38 SCIENCE, then more cramming 19:27 Inspecting cams and journals on the RH Bank 20:45 These head bolts are CREEKY 21:46 A closer look at the pistons and bores, and more science 23:03 Unbolting the oil pan 24:14 Zipping the pickup tube and oil pump bolts out and then tearing the oil pump down 25:37 I am stubborn 27:25 turning the crank over, feels ok but a bit of resistance that feels wrong 27:48 Unbolting the first rod and piston 29:14 Unbolting and pushing the last rod and piston out of the block 29:34 Removing the main cap bolts and plucking the crankshaft out 30:00 Full short block inspection, block, bores, crank, rings, bearings, pistons, and OIL GALLERY 35:07 Summary

Back to I Do Cars · Report a problem