Skip to main content
AmigoFish

BeerSmith Home Brewing

Brad Smith and FriendsAudio

Format:
Podcast
New episodes:
Weekly
Latest episode:
Not rated yet
CosmosOpen at the sourceReport a problemIs this your show? Get a badge

About this show

The BeerSmith Home Brewing Show is a beer brewing podcast focused on how to brew beer, homebrewing techniques, and beer stories from top US and international brewers. In each episode we bring you an interview with guests assembled from around the world to talk about beer, craft beer and homebrew. The BeerSmith podcast is hosted by Dr Brad Smith, the author of BeerSmith homebrewing software, the book “Home Brewing with BeerSmith”, and the BeerSmith blog which attracts nearly 50,000 readers monthly. Website: http://BeerSmith.com/blog

Show details and episodes come from the publisher's public feed at feeds.feedburner.com. Last updated . Names, artwork and text belong to their publishers.

Cosmos

Similar by topic and creator

See the full Cosmos

Similar shows

See all Education shows

Explore more

Episodes

  • A Brewer’s Guide to Adjusting Hard Water for Better Beer

    https://d3pddo38v7j30h.cloudfront.net/blog/wp-content/uploads/2026/11/GlassesOnBarWeb.jpg This week I take a look at what to do if your water source is simply too high in mineral content and ways you can compensate to brew great beer. My Struggle with Bad Water Back in the 1990’s when I first started brewing all grain beers, I lived in the mountains outside of Albuquerque, New Mexico where unfortunately the water was very high in mineral content. It was so hard, that we had to use bottled water to make coffee. I ended up also purchasing bottled water to make beer as the water was simply not usable for brewing. Understanding Your Existing Brewing Water Our knowledge base for brewing has expanded significantly in the last 30 years, so now we know a lot more about what to do about hard water or water that simply has high ion content. I would recommend that you first get your water tested for the big six water ions (https://beersmith.com/blog/2021/08/06/the-big-six-water-ions-and-water-chemistry-in-beer-brewing/) using a reputable test kit or lab that provides a brewing water report. This will give you a definitive measure of just how good or bad your water is. With your water report you should get a measure of each of the following water ions in parts per million (ppm) or mg/l which are approximately the same thing. Here’s a guide for what each of the ions does and also the range that is acceptable for brewing: - Calcium (Ca) [50-100 ppm] – Acidifies the mash and drives down the mash pH which is generally a good thing in lighter color beers. It also aids in precipitating phosphates and improving the stability of the beer. Calcium also provides some structure to the beer and is used in that role as well. - Bicarbonate (HCO3) [0-250 ppm] or Alkalinity [0-200 ppm] – Strongly alkaline so it will raise the mash pH which is undesirable in lighter color beers. High levels also will impede the cold break and emphasize bitterness in a harsh way. The main role for these ions is in mash pH balance, and too much alkalinity can be undesirable. You can convert from bicarbonate to alkalinity using this equation: alkalinity = bicarbonate * 50 / 61 - Sulfate (SO4) [50-250 ppm] – Suilfate enhances bitterness in beer and slightly lightens color. Its primarily role is as a counterbalance to chloride in determining the sulfate/chloride ratio (https://beersmith.com/blog/2016/02/11/the-sulfate-to-chloride-ratio-and-beer-bitterness/) which affects bitterness perception in the final beer. - Chloride (Cl) [0-250 ppm] – Chloride will lower the bitterness perception and enhance the maltiness of the beer. Its major role, along with sulfate, is in determining the sulfate/chloride ratio (https://beersmith.com/blog/2016/02/11/the-sulfate-to-chloride-ratio-and-beer-bitterness/) which affects bitterness perception in the beer. - Sodium (Na) [0-150 ppm] – Sodium provides enhances the sweetness and body in certain dark beers. However it is not a major player in mash pH so it is primarily used to provide some roundness in darker beers. - Magnesium (Mg) [10-40 ppm] – Magnesium plays an important role in fermentation as it is needed by yeast, but grains in the mash do provide about 100ppm of magnesium. However, recent research indicates that calcium may actually block the yeast’s access to magnesium if it is very high. So it may be important to keep the total magnesium levels (water plus magnesium from the mash) above the calcium to enhance yeast health. Magnesium also plays a small role in mash pH, but is largely overshadowed by bicarbonate and sulfate. When looking at the ranges above, you need to keep in mind that those are general guidelines and the actual water profile needed will vary by style. For example, 200ppm bicarbonate might be perfectly acceptable in a stout but would not work well in a light continental lager. BeerSmith software (https://beersmith.com) has a series of water profiles under Ingredients->Water by city and style which you can…

    Not rated yet
  • Oak Barrel Aging and Soluble Oak with Cal Larson – BeerSmith Podcast #353

    Cal Larson joins me this week to discuss oak flavors in beer, oak barrel aging and a new oak extract he developed called Soluble Oak. Subscribe on iTunes to Audio version (https://itunes.apple.com/us/podcast/beersmith-home-beer-brewing/id398500515?mt=2)or Video version (https://itunes.apple.com/us/podcast/beersmith-home-beer-brewing/id824963861) or Spotify (https://open.spotify.com/show/7vwQRBi8HJBpePV3I7Dpj5)or Google Music (https://music.youtube.com/playlist?list=PLmt3Is-jbBLXos-tmhHJ2e_tCMQooh7gj&si=JnITvPpXDFmKOO_I) Download the MP3 File (https://traffic.libsyn.com/beersmith/BSHB-353-Cal.mp3)– Right Click and Save As to download this mp3 file. Your browser does not support the audio element. YouTube now marks the content age restricted as it is related to alcohol but you can easily watch it from here. Topics in This Week’s Episode (38:58) - This week I welcome Cal Larson. Cal is the founder of Soluble Oak (https://solubleoak.com/), where he spent four years developing a patent-pending oak extract for use in beers, wine, and distilled spirits. The new oak extracts are made from real oak and add oak flavor and significant mouthfeel to the finished beverage. - They recently had a big story drop on their product which you can read here. (https://bourbonblenders.com/the-blendz-blog/f/soluble-oak-can-you-improve-bourbon-without-a-barrel?blogcategory=Blending+Equipment) - We start with a brief overview of Cal’s career which is actually as a trader in white oak. Four years he started experimenting with ways to create a new oak flavor extract resulting in soluble oak. - Cal explains some of the limitations of oak chips and spirals which are commonly used in home brewing. He tells us why these products are often made from less desirable portions of the tree, resulting in more tannic flavors. - He then discusses oak barrel aging which has a long history, as beers were stored and transported in oak barrels for thousands of years. However most modern brewers are working with used wine and bourbon barrels which have already had a lot of the pure oak flavor extracted from them. As a result we often get more tannic flavors or the flavor of wine or bourbon instead of true oak. - Cal talks about why used oak barrels often produce very inconsistent aging and require extensive blending. - He next introduces his soluble oak extract which is made from American and French white oak, and how he developed the product with scientists over a four year period. - We talk about dosing, and how soluble oak can be added “to taste” to a finished beer instead of having to guess up front or age the beer for months or even years. - Cal discusses the Brulosophy experiment which found that Soluble oak did impart a unique oak flavor which many preferred. - He talks about commercial applications for soluble oak in Craft beer and also wine and spirit making. - We discuss the advantages and disadvantages of soluble oak versus traditional barrel aging, and also where he plans to go next. - He provides his closing thoughts. Sponsors - The podcast is sponsored by BeerSmith 4 (http://beersmith.com), and BeerSmith Web (https://beersmithrecipes.com). You can subscribe to the BeerSmith newsletter (https://beersmith.com/blog/subscribe/) for free to get some great articles on home brewing. iTunes Announcements: I launched a new video channel for the BeerSmith podcast on iTunes (https://itunes.apple.com/us/podcast/beersmith-home-beer-brewing/id824963861), so subscribe now! At the moment it will only feature the new widescreen episodes (#75 and up). Older episodes are available on my revamped Youtube channel (http://youtube.com/mrbeersmith). Also all of my audio episodes are on iTunes (http://itunes.apple.com/podcast/beersmith-home-brewing-blog/id398500515) now – so grab the older episodes if you missed any. Thoughts on the Podcast? Leave me a comment below or visit our discussion forum (http://beersmith.com/forum) to leave a comment in the podcast…

    Not rated yet
  • Understanding Dry Yeast Pitch Rates: A Comprehensive Guide for Homebrewers

    https://d3pddo38v7j30h.cloudfront.net/blog/wp-content/uploads/2026/11/Cheers-Glasses-web.jpg This week I take a look at ways to determine how much dry yeast you need to use when brewing beer. Dry yeast pitch rates are measured in a slightly different way than liquid yeast, so understanding the yeast lab recommendations and how to apply it is an important skill to have when brewing with dry yeast. What Makes Dry Yeast Different? Liquid yeast is typically measured by volume and pitch rates are often determined based on the number of cells in a given yeast package or volume. You can then calculate the pitch rate based on the desired cell count. Commercial brewers often look at the millions of cells per milliliter of beer after pitching as a good measure of pitch rate, and may adjust that based on the type of yeast used and gravity of the beer. I have an article here that covers the new liquid pitch calculator in BeerSmith 4 in more detail. (https://beersmith.com/blog/2026/03/18/new-yeast-features-pitch-rates-and-yeast-starters-in-beersmith-4/) Also, because of the short shelf life we often will use a yeast starter to increase the number of viable cells before pitching a liquid yeast. Dry yeast is a different beast. While most labs maintain a roughly constant number of yeast cells per milliliter for liquid yeast, the number of cells in a gram of dry yeast can vary by strain. As a result it becomes difficult to accurately calculate the number of cells in a pack of dry yeast. Also dry yeast has a long shelf life if properly stored, so you rarely need a dry yeast starter and many brewers will instead pitch additional dry yeast rather than creating a starter. Since dry yeast cell counts vary by strain, yeast labs instead publish a recommended pitch rate for each yeast. This is typically expressed in grams per hecto-liter (100 liters) or g/hL. Many ales have pitch rates from 60-100 g/hL. Lagers are often in the 100-200 grams/hL range, wines in the 20-40 g/hL range and bacteria strains can either be very low or high depending on the specific variety. Note that this is an “average” recommendation for the yeast strain. So if you are brewing an average strength ale and use an ale yeast with a recommended 75 g/hL then you can simply multiply that number by the batch size in hundreds of liters to get the grams needed. However if you are brewing a very high gravity beer more yeast may be needed so you will pitch at a slightly higher rate. Similarly a very low gravity beer would use a lower rate. To apply these values simply calculate the batch size into the fermenter in hectoliters (100s of liters) and multiply that by the lab recommended pitch rate to get the number of grams to pitch. You can also use BeerSmith 4 to perform more advanced pitch calculations as outlined below. BeerSmith 4 Dry Yeast Features The new BeerSmith 4 software incorporates these lab recommendations in the yeast record under the Average Pitch Rate field for each yeast record. I entered the yeast pitch rate recommendations from the labs for each strain in the database so it is easily accessible. So you simply select the yeast you want to use and then it will show the recommended pitch rate and also the number of grams of dry yeast needed for the batch to achieve that rate. You can use the pitch rate slider to adjust that rate up or down for high or low gravity beers and it will adjust the grams of yeast needed. It also estimates the cells and pitch rate based on that, but overall you are best off starting with the lab’s recommended pitch rate and then adjusting up or down slightly if you are making a high or low gravity batch. https://d3pddo38v7j30h.cloudfront.net/blog/wp-content/uploads/2026/11/dryyeast.png Note that the new feature only comes into play if you have the yeast quantity in grams using the new yeast database. If you are working with a legacy recipe where the yeast is in packages, you need to substitute and re-select the new yeast ingredient from…

    Not rated yet
  • Mastering BeerSmith 4: A Comprehensive Guide to Scaling Your Beer Recipes

    Scaling a beer recipe is a powerful feature in BeerSmith that can be used to brew another person’s recipe, creating a larger or smaller recipe or even adjusting your efficiency numbers. Most often you are scaling a recipe to match your equipment setup (https://beersmith.com/blog/2021/11/23/the-ultimate-beersmith-equipment-profile-guide/) – but this article is going to cover several possible uses. Note that scaling is available on both the desktop and mobile versions of BeerSmith including BeerSmith 2, 3 and 4. Uses for Beer Recipe Scaling In its simplest form, scaling a beer recipe is done to adjust the ingredients to make a smaller or larger recipe. However, the BeerSmith scale recipe command is a bit more powerful than that as it also allows you to match a recipe to vastly different brewing systems while maintaining color, bitterness and original gravity. Note that I have a video from BeerSmith 3 that covers basic recipe scaling you can watch here (https://beersmith.com/blog/2018/10/04/scaling-the-size-of-a-recipe-in-beersmith-3-brewing-software/), though the process on BeerSmith 4 and BeerSmith web is the same. Some sample uses for the scale recipe command include: - Make a copy of one of the tens of thousands of public recipes from the BeerSmithRecipes.com cloud site (https://beersmithrecipes.com/) and scaling it to match your equipment for immediate brewing (go to Cloud Search view to find a recipe then make a local copy of it before scaling) - Scaling from a pilot size brewing system to a full size brewing system for commercial brewing (https://beersmith.com/blog/2014/06/11/scaling-beer-recipes-for-commercial-use-with-beersmith/). - Adjusting the brewhouse efficiency of an all grain batch while keeping the same original gravity. - Changing from one equipment setup to another without changing the OG, color or bitterness. - Doing a “proportional” scale where you scale the ingredients up proportional to the change in recipe volume. Scaling from One Equipment Profile to Another https://d3pddo38v7j30h.cloudfront.net/blog/wp-content/uploads/2026/10/ScaleSize.png The most common use for scaling a recipe is to move from one equipment profile to another. For example you may have found a good recipe in a BeerSmith cloud search or received one from a friend. That recipe is likely sized and set up for a different set of equipment with different boil sizes, losses, etc. BeerSmith can quickly size it to match your preferred equipment. This is the safest way to change the volume as well – you can go from a 5 gallon (19 liter) to 10 gallon (38 liter) profile. Commercial brewers use BeerSmith to scale from small pilot batches up to 30 barrel systems (https://beersmith.com/blog/2014/06/11/scaling-beer-recipes-for-commercial-use-with-beersmith/) or larger. You do need to have an equipment profile set up for the equipment you are going to – in most cases this will be your personal equipment profile for your brewing system (http://beersmith.com/setting-up-your-equipment-in-beersmith-2/). - To scale a recipe, simply open the recipe and select the Scale Size button which is on the toolbar for BeerSmith desktop and web or near the bottom for BeerSmith mobile. This will display the scale recipe dialog shown above. - Next select the equipment profile you want to scale to by clicking on the “Equipment” selector and then picking your profile from the equipment list shown. If you have not set up your equipment profile there is an extensive post here on how to set up profiles for various setups (https://beersmith.com/blog/2021/11/23/the-ultimate-beersmith-equipment-profile-guide/). - Finally you have the option (using the checkbox near the bottom) to maintain the OG, Color and bitterness of the original recipe. In most cases you will want to do this. If you uncheck this box, the program will do a simple scaling based on batch volume of all the ingredients. However this may not maintain the same OG, bitterness or color as each…

    Not rated yet
  • The Art of Brewing Holiday Christmas Ale: Tips for Crafting the Perfect Batch

    https://d3pddo38v7j30h.cloudfront.net/blog/wp-content/uploads/2026/10/shutterstock_2396731477.jpg With the holiday season fast approaching, its a great opportunity to start brewing a festive winter beer. Spices, fruits and hop additions can all be combined to brew the perfect holiday ale or lager. Often called a Christmas, Winter or Holiday beer, these beers often include classic holiday spices such as nutmeg, sugars, mulling spices, ginger or cookie flavors. The Christmas/Winter Seasonal Style The current BJCP beer style guide includes category 30C “Winter Seasonal Beer” (https://www.bjcp.org/style/2015/30/30C/winter-seasonal-beer/) that defines the holiday/winter beer style. The style is closely tied to the flavors and aromas of the Christmas season. From the 30C style guide we have: Winter Seasonal Beers are beers that suggest cold weather and the Christmas holiday season, and may include holiday spices, specialty sugars, and other products that are reminiscent of the festive season. A stronger, darker, spiced beer that often has a rich body and warming finish suggesting a good accompaniment for the cold winter season…Spices are required, and often include those evocative of the Christmas season (e.g., allspice, nutmeg, cinnamon, cloves, ginger) but any combination is possible and creativity is encouraged. Fruit peel (e.g., oranges, lemon) may be used, as may subtle additions of other fruits (often dried or dark fruit). Flavorful adjuncts are often used (e.g., molasses, treacle, invert sugar, brown sugar, honey, maple syrup). Usually ales, although strong dark lagers exist. Aromatics are particularly important for this style including aromatic hops, nutmeg, ginger, allspice, cloves, cinnamon, mulling spices, sugar, caramel, pudding, evergreen trees, cookies and aromas associated with holiday desserts. Fruits are also popular including oranges, lemons, currants, and berries. Flavorful sugars such as molasses, tracle, invert, brown sugar, maple, pumpkin and honey are also often used. The beer itself is often strong, dark and has a rich body that warms the drinker and complements the spices. For BJCP competition a base style should be declared as well as the spices and additions used. Because the base style can vary, holiday ales encompass a wide variety of original gravities, hop levels and color, though most holiday ales tend to be slightly higher in alcohol and warmer in body to reflect a warming drink for the cold winter season. Brewing a Christmas/Winter Beer All winter beers start with the choice of a base beer. The base beer can vary widely. For spiced beer it is often a moderately dark, alcoholic beer (often an Old Ale) that is well hopped and provides warmth, good body and some complexity of flavor to complement the cold weather and choice of spices. These beers are often built on an American or Belgian base style US and Belgian brewers often use spices in regular brewing. In contrast, fruit based winter beers often use a light wheat base and low hop rates so the flavor of the fruit will come through and be properly accented. The key is to choose a beer that complements and does not distract from your choice of adjuncts. Since the spices and adjuncts use vary widely it is difficult to identify a single magic formula for the perfect winter ale. Two overriding principles serve as a useful guide: First – have an overarching theme/goal for your beer to aid in choosing ingredients and second – moderate your adjuncts. Setting an objective for your holiday ale is important. For example, if you want to brew a beer reflecting the flavors of a sugar cookie you might start with a robust body ale, and then add sugar or possibly even a small amount of lactic acid or maple sugar to provide warmth and sweetness. A small amount of nutmeg would be an appropriate spice to reflect the flavor of the cookie. In contrast, a gingerbread beer would use an entirely different base and set of spices – likely incorporating ginger,…

    Not rated yet
  • How Beer Ages with Colin Kaminski – BeerSmith Podcast #352

    Professional brewer and author Colin Kaminski joins me this week to discuss the major aging mechanisms in beer and how you can extend the shelf life of your beer by understanding the aging process. Subscribe on iTunes to Audio version (https://itunes.apple.com/us/podcast/beersmith-home-beer-brewing/id398500515?mt=2)or Video version (https://itunes.apple.com/us/podcast/beersmith-home-beer-brewing/id824963861) or Spotify (https://open.spotify.com/show/7vwQRBi8HJBpePV3I7Dpj5)or Google Music (https://music.youtube.com/playlist?list=PLmt3Is-jbBLXos-tmhHJ2e_tCMQooh7gj&si=JnITvPpXDFmKOO_I) Download the MP3 File (https://traffic.libsyn.com/beersmith/BSHB-352-Colin.mp3)– Right Click and Save As to download this mp3 file. Your browser does not support the audio element. Topics in This Week’s Episode (38:58) - This week I welcome Colin Kaminski. Colin is the co-author of the Water: A Comprehensive Guide for Brewers (https://amzn.to/35oq1kD) (Amazon affiliate link) as well as a professional brewer with Downtown Joe’s in Napa, California. Colin also designs professional brewing equipment at MoreBeer. He has been brewing since 1998. - We discuss during the podcast Colin’s last appearance in episode #293 (https://beersmith.com/blog/2023/12/01/controlling-oxygen-in-beer-with-colin-kaminski-beersmith-podcast-293/) where we covered reducing oxygen in the finished beer. - We begin by discussing some of Colin’s recent activities including his work with Downtown Joe’s and MoreBeer. - Colin introduces aging and talks about how beer ages and goes bad over time. - We discuss oxygen and why it is a critical component in aging and also how Trans-2-Noneal (T2N) plays a central role in creating the wet cardboard/catty flavor we associate with stale light beers. - T2N has a flavor threshold of about 100 parts per trillion. Colin puts that number into perspective. - We discuss how T2N combines with oxygen to make a beer age over time. - Colin discusses the role Lipoxygenese (LOX) plays in forming T2N and how LOX in the malt is the root source of the T2N problem. - We talk about how some malsters are creating malts that are LOX free or LOX negative so they lack the precursors that create T2N. He also says that some of these malts are SMM negative as well and can prevent the occurrance of DMS. This allows a brewer to shorten the boil. - LOX, oxygen and T2N are only one mechanism for aging. Colin tells us some of the other factors that come into play when trying to maximize the shelf life of your beer. - We talk about IPAs and hops and why so many IPAs lose their peak hop aroma in a short period of time – often 30-60 days. - Colin discusses some of the other interesting projects he is working on at MoreBeer. - He provides his closing thoughts. Sponsors - The podcast is sponsored by BeerSmith 4 (http://beersmith.com), and BeerSmith Web (https://beersmithrecipes.com). You can subscribe to the BeerSmith newsletter (https://beersmith.com/blog/subscribe/) for free to get some great articles on home brewing. iTunes Announcements: I launched a new video channel for the BeerSmith podcast on iTunes (https://itunes.apple.com/us/podcast/beersmith-home-beer-brewing/id824963861), so subscribe now! At the moment it will only feature the new widescreen episodes (#75 and up). Older episodes are available on my revamped Youtube channel (http://youtube.com/mrbeersmith). Also all of my audio episodes are on iTunes (http://itunes.apple.com/podcast/beersmith-home-brewing-blog/id398500515) now – so grab the older episodes if you missed any. Thoughts on the Podcast? Leave me a comment below or visit our discussion forum (http://beersmith.com/forum) to leave a comment in the podcast section there. Subscribe to the Podcast on iTunes You can subscribe to the audio or video using the iTunes links below, or the feed address - Audio feed on iTunes – http://itunes.apple.com/podcast/beersmith-home-brewing-blog/id398500515 (direct:…

    Not rated yet
  • Understanding Infusion Mashing: A Comprehensive Guide for Homebrewers

    https://d3pddo38v7j30h.cloudfront.net/blog/wp-content/uploads/2016/12/P1170273.jpg This week I take a look at infusion mashing, an method for managing your mash step temperatures during the mash phase of an all-grain brewing session. Mashing for All Grain Brewers The majority of home and professional brewers use an all-grain method for brewing where they start with malted barley grains, and go through phases for the mashing, sparging, boiling, cooling and fermenting the wort into beer. During the mash phase, the crushed malted grains are mixed with water and heated up to a target temperature typically between 146-158F (63-70 C) where enzymes natural to the grain act to break longer starch chains into simple sugars (https://beersmith.com/blog/2021/10/02/enzymes-in-beer-alpha-and-beta-amylase/) like maltose that can easily be fermented by yeast later in the process. Depending on how modified the malt is (https://beersmith.com/blog/2010/01/04/diastatic-power-and-mashing-your-beer/) and the conditions in the mash this process can take anywhere from 20 minutes to over an hour. Some brewers have historically used a multi-step mash with a timed rest at different temperatures to achieve additional effects. For example the Lager (German) mash profile is widely used with many European lager styles (https://beersmith.com/blog/2023/07/18/the-german-step-mash-profile-for-beer-brewing/). It uses a two step mash with the first step in the mid-140’s F (63 C) and the second step in the 159 F (70 C) temperature range. Hitting both steps results in a beer that achieves high fermentability due to the enzymes activated, but still retains good mouthfeel. There are a variety of other multi-step profiles historically used with undermodified malts, but these have largely fallen out of favor with modern brewers who prefer the simplicity and time savings of a single-step mash, occasionally varying into a two step German/Lager mash described above for certain styles. The Infusion Mashing Method For the initial infusion mash step, most brewers will target a given water/grain ratio to determine the volume of water to use in the mash. For conventional mashing this water/grain ratio is typically in the 1.25-2 quarts/lb range. For brew-in-a-bag and all-in-one systems often the total water needed for the batch is included up front, resulting in much higher water/grain ratios. Some traditional decoction mash profiles also use high water/grain ratios in the 3-4 qt/lb range. For a given amount of mash water and grains, it is fairly easy to find the equation for infusion estimates which is based on the specific heat of water, specific heat of grains and the relative volumes and temperature differential. However in practice most brewer use an online calculator or software such as BeerSmith (https://beersmith.com)to get the temperature and then just heat their water to that target temperature before mashing in. Once you have the temperature you just heat your water up to that value and then mix in the malts. Mashing Methods – Achieving Your Target Temperature Once you have established whether you want to use a single-step or multi-step mash the next decision to make is how to achieve the target temperature for each step. There are three general methods we can apply: - Infusion Mashing – Water is heated either in the main vessel or a secondary hot liquor tun to a target temperature. For the first step, we usually add the water first and then “dough-in” the grains to achieve the target temperature. In later steps, more hot water can be added to raise the overall temperature, or you can use direct heating or a decoction step. - Direct Heating – Some mash tuns can be directly heated. We can apply heat to the water before mashing in to do an initial infusion step as described above, and then apply more heat if we need to raise the temperature for subsequent steps. This is often called a “temperature step” as we change the temperature without adding more water.…

    Not rated yet
  • The Golden Age of UK Brewing with Ron Pattinson – BeerSmith Podcast #351

    Ron Pattinson joins me this week to discuss the Golden Age of UK Brewing which spanned roughly from the 1880’s up until World War I. This period featured a wide variety of English beer styles with standard strength and relatively low regulation. Subscribe on iTunes to Audio version (https://itunes.apple.com/us/podcast/beersmith-home-beer-brewing/id398500515?mt=2)or Video version (https://itunes.apple.com/us/podcast/beersmith-home-beer-brewing/id824963861) or Spotify (https://open.spotify.com/show/7vwQRBi8HJBpePV3I7Dpj5)or Google Music (https://music.youtube.com/playlist?list=PLmt3Is-jbBLXos-tmhHJ2e_tCMQooh7gj&si=JnITvPpXDFmKOO_I) Download the MP3 File (https://traffic.libsyn.com/beersmith/BSHB-351-Pattinson.mp3)– Right Click and Save As to download this mp3 file. Your browser does not support the audio element. Topics in This Week’s Episode (40:30) - This week I welcome back Ron Pattinson. Ron is the author of dozens of books and articles on historical beer brewing including his most recent effort to document British brewing during World War II. You can find his articles and purchase his books from his blog and Youtube Channel which can be found here at Shut Up About Barclay Perkins (https://barclayperkins.blogspot.com/). - We begin by discussing some of Ron’s recent travels. - Ron tells us about the Golden Age of UK brewing which started in the 1880’s and lasted roughly up until World War I. He explains why this was one of the best times in British brewing with full strength beers and a wide variety of classic English styles brewed. - He explains the “Free Mash Tun Act” and how it opened up UK brewing to a wide variety of beers and strengths. - Ron tells us about some of the many styles that were popular back then. We also cover why Lagers never took off in the UK in the way that they did in Europe and America. - We talk about why large breweries started buying up pubs to create branded pubs for end to end distribution, and how high license fees on pubs sent several breweries into bankruptcy. - Ron explains the decline of Porter which was wildly popular in the 1700’s but steadily declined in the 1800s. - We also talk about stouts which remained popular despite the fall of Porters. - Ron talks about Brown ale which was introduced during this time period and became popular throughout the UK. - Stock ales and Pale Ales fell in popularity during this time and Ron tells us a bit about why they went out of fashion. - Ron shares where you can find his books and YouTube channel on his blog linked above. - He provides his closing thoughts. Sponsors - The podcast is sponsored by BeerSmith 4 (http://beersmith.com), and BeerSmith Web (https://beersmithrecipes.com). You can subscribe to the BeerSmith newsletter (https://beersmith.com/blog/subscribe/) for free to get some great articles on home brewing. iTunes Announcements: I launched a new video channel for the BeerSmith podcast on iTunes (https://itunes.apple.com/us/podcast/beersmith-home-beer-brewing/id824963861), so subscribe now! At the moment it will only feature the new widescreen episodes (#75 and up). Older episodes are available on my revamped Youtube channel (http://youtube.com/mrbeersmith). Also all of my audio episodes are on iTunes (http://itunes.apple.com/podcast/beersmith-home-brewing-blog/id398500515) now – so grab the older episodes if you missed any. Thoughts on the Podcast? Leave me a comment below or visit our discussion forum (http://beersmith.com/forum) to leave a comment in the podcast section there. Subscribe to the Podcast on iTunes You can subscribe to the audio or video using the iTunes links below, or the feed address - Audio feed on iTunes – http://itunes.apple.com/podcast/beersmith-home-brewing-blog/id398500515 (direct: http://beersmith.com/content/feed/podcast) - Video feed on iTunes – https://itunes.apple.com/us/podcast/beersmith-home-beer-brewing/id824963861 (direct: http://beersmith.com/tv/category/podcast/feed/ ) - Audio…

    Not rated yet
  • Should I Start a Brewery Now with Jamil Zainasheff – BeerSmith Podcast #350

    Jamil Zainasheff joins me this week to discuss why you should (or should not) start a brewery today and walks us through some of the joys and pitfalls that come with owning your own Craft brewery. Subscribe on iTunes to Audio version (https://itunes.apple.com/us/podcast/beersmith-home-beer-brewing/id398500515?mt=2)or Video version (https://itunes.apple.com/us/podcast/beersmith-home-beer-brewing/id824963861) or Spotify (https://open.spotify.com/show/7vwQRBi8HJBpePV3I7Dpj5)or Google Music (https://music.youtube.com/playlist?list=PLmt3Is-jbBLXos-tmhHJ2e_tCMQooh7gj&si=JnITvPpXDFmKOO_I) Download the MP3 File (https://traffic.libsyn.com/beersmith/BSHB-350-Jamil.mp3)– Right Click and Save As to download this mp3 file. Your browser does not support the audio element. Topics in This Week’s Episode (49:29) - This week I welcome back Jamil Zainasheff. Jamil is an award winning professional and home brewer. Jamil authored the books “Brewing Classic Styles”, “The Practical Guide to Beer Fermentation” as well as his new book “The Modern Homebrewer” and also co-hosts the “Brew Strong” podcast on the Brewing Network. He recently revised his website and yeast calculators at MrMalty.com (https://mrmalty.com/) - We discuss some of Jamil’s new projects including his revised website at MrMalty.com - Jamil talks about why it may not be a horrible time to open a brewery even though both homebrewing and Craft brewing are in decline. - He explains what type of person it takes to start up a Craft brewery and just how much work is involved. - We discuss getting the beer lineup correct, and why you do need to brew popular beers like IPAs as well as your personal favorites. - Jamil tells us that unfortunately owning a brewery is more about running a small business than it is about being a brewer. - He explains how you might fund your brewery and why you need a year’s worth of operating expenses on top of your cost to set up and open the brewery. - We talk about how long it takes to get a brewery started. - Jamil gives us his thoughts on selecting the right location. - We talk about the many roadblocks new breweries can run into - Jamil shares a bit more about his revised website mentioned above and what it has to offer. - Jamil gives us his closing thoughts. Sponsors - The podcast is sponsored by BeerSmith 4 (http://beersmith.com), and BeerSmith Web (https://beersmithrecipes.com). You can subscribe to the BeerSmith newsletter (https://beersmith.com/blog/subscribe/) for free to get some great articles on home brewing. iTunes Announcements: I launched a new video channel for the BeerSmith podcast on iTunes (https://itunes.apple.com/us/podcast/beersmith-home-beer-brewing/id824963861), so subscribe now! At the moment it will only feature the new widescreen episodes (#75 and up). Older episodes are available on my revamped Youtube channel (http://youtube.com/mrbeersmith). Also all of my audio episodes are on iTunes (http://itunes.apple.com/podcast/beersmith-home-brewing-blog/id398500515) now – so grab the older episodes if you missed any. Thoughts on the Podcast? Leave me a comment below or visit our discussion forum (http://beersmith.com/forum) to leave a comment in the podcast section there. Subscribe to the Podcast on iTunes You can subscribe to the audio or video using the iTunes links below, or the feed address - Audio feed on iTunes – http://itunes.apple.com/podcast/beersmith-home-brewing-blog/id398500515 (direct: http://beersmith.com/content/feed/podcast) - Video feed on iTunes – https://itunes.apple.com/us/podcast/beersmith-home-beer-brewing/id824963861 (direct: http://beersmith.com/tv/category/podcast/feed/ ) - Audio podcast on Google Play here (https://podcasts.google.com/?feed=aHR0cDovL2JlZXJzbWl0aC5jb20vY29udGVudC9mZWVkL3BvZGNhc3Qv&hl=en) And finally, don’t forget to subscribe to the blog and my newsletter (https://beersmith.com/blog/subscribe) (or link at the top of the page) – to get free weekly articles on home brewing.

    Not rated yet
  • Understanding Hop Storage: Best Practices for Preserving Freshness and Flavor

    https://d3pddo38v7j30h.cloudfront.net/blog/wp-content/uploads/2026/06/HopPellets-Web.jpg This week I take a look at the best way to store your hops to maintain their freshness as long as possible. As brewers we are focused on extending the shelf life of hops as long as possible and also retaining critical bittering and aroma compounds in the stored hops. How Hops Age Hops, like malt and yeast, have a limited shelf life. Hops are typically harvested once a year and then rapidly dried, packaged and stored in either pellet or whole leaf format. The vast majority of hops produced in the US are stored in T90 pellet form, though some is still available in a whole leaf format while a portion is also used to make various kind of extracts and advanced hop products (https://beersmith.com/blog/2026/05/27/an-overview-of-new-hop-products-for-beer-brewing/). The majority of dried hop composition is cellulose (about 50%) and water (about 10%). However hops have over 500 flavor compounds including alpha acid (0-22%) which provides most of the bitterness and aroma oils (0.5-4%) which provide the fresh hop aroma. It is these flavor and aroma compounds that are most fragile and likely to break down over time. The main enemies of hops are: - Heat: Heat accelerates the chemical decomposition of hop compounds. The relationship between temperature and loss of alpha acid, for example, is exponential. For every 15 degrees C (27F) of additional temperature the rate of decomposition roughly doubles. So hops stored at 75 F (24 C) will degrade four times as fast as hops stored at freezing temperature. - Light: Hop cones become susceptible to light exposure as soon as they are picked. Light can break down both alpha acids and aroma compounds, so hop growers take care to store picked hops away from light and package hops in light barrier packaging. - Moisture: Moisture promotes staling, especially combined with heat and oxygen. That is why fresh hops are rapidly dried to approximately a 10% or less moisture content, and wet fresh hops can really only be used for a few days (https://beersmith.com/blog/2016/03/22/using-fresh-wet-hops-in-home-brewed-beer/) without drying before they will go bad. - Oxygen: Alpha acids and aroma compounds are both prone to oxidation. Oxidized hops take on a “cheesy”, stale aroma. This is why most hops are stored in foil packaging which also serves as an oxygen barrier. This is also why T90 pellets are the gold standard for storage as they provide less surface area for oxygen exposure. In general as hops age they will lose their fresh hop aroma first. Aromatic oils are volatile and fragile and will degrade rapidly as the hops are exposed to any of the above accelerators. Alpha acid also degrades over time reducing the effective alpha acid percentage of the hops as they age. There is an index called the Hop Stability Index (HSI) (https://beersmith.com/blog/2008/04/15/brewing-hops-storage-preserving-precious-hops/) which measures the alpha acid lost in 6 months when hops are stored at a standard temperature of 20 C (68F). Most hops are considered viable for use as a boil hop until they lose approximately half of their alpha acid. This index is variety specific, but can help to estimate how long hops might last at a given temperature and storage state. BeerSmith has a tool under Tools->Hop Age to help you complete this estimate if you know the approximate HSI. The Best Way to Store Your Hops By far the best way to store your hops is sealed in their original packaging in your freezer. Most modern hops use a vacuum packed foil package that provides an oxygen, light and moisture barrier. Storing these packets in your freezer also provides protection against heat for maximum lifespan. Properly stored this way the hops should last you a year or more depending on the variety. I do recommend in all cases opening and sampling the aroma on your hops before you start brewing on brew day. I’ve found in several cases that even…

    Not rated yet
  • The Role of RO Water Systems in Beer Brewing: Achieving Consistency and Quality

    https://d3pddo38v7j30h.cloudfront.net/blog/wp-content/uploads/2026/07/ROWaterWeb.jpg This week I take a look at Reverse Osmosis (RO) water systems and why they are a popular choice for many home and professional beer brewers. Water has a huge impact on the flavor of your beer in large part because it is the dominant beer ingredient. While many brewers are blessed with perfectly good brewing water from the tap, there are a lot of areas around the world where that is not the case. I once lived in the mountains of New Mexico and the water was extremely hard making it unsuitable for making beer or even a good cup of coffee. I was forced to use distilled water from the local store for brewing instead. An RO system lets you get near-distilled water from a regular water source, usually at a lower total cost. In addition to compensating for bad water, RO water provides a blank slate for you to build up your desired water profile by adding water salts (https://www.youtube.com/watch?v=en4el24OQ8w). RO lets you duplicate a water profile to match a particular city or beer style so you can brew just about anything. The problem with starting with tap water is that it contains a certain starting mineral ion content, and you can’t remove minerals unless you dilute it. That is why so many professional brewers use a RO water system. It gives them a blank slate to start with from which to build up different water profiles for any style of beer. What is Reverse Osmosis Water? Reverse osmosis is a sophisticated water purification method to remove unwanted minerals and contaminants from your local water source. RO systems use a semi-permeable membrane that only allows pure water molecules through. This leaves the unwanted minerals and other particles behind giving you water that is very close to distilled water on the output side. A typical RO system applies pressure to the water to force molecules through the membrane, and will reduce the Total Dissolved Solids (TDS) in a typical tap water from 300-500ppm down to 1-10 ppm. When we talk about brewing water, we are typically most concerned with the big six brewing ions (https://beersmith.com/blog/2021/08/06/the-big-six-water-ions-and-water-chemistry-in-beer-brewing/comment-page-1/) which are Calcium, Bicarbonate, Sulfate, Chloride, Sodium and Magnesium. The RO system will usually leave only trace concentrations of these ions in the single digits in terms of ppm. This means that RO water is for practical purposes equivalent to distilled water when used as a base water. Since we do need some ions to support both flavor and fermentation, brewers using RO water will add salts to match a given water profile using a software tool like BeerSmith (https://www.youtube.com/watch?v=en4el24OQ8w). Considerations for Selecting a Brewing RO Water System RO water systems come in all shapes and sizes with various features and capabilities. Here are a few of the major features and specs to consider: - Filtration Stages: Modern systems filter using several membranes arranged in stages. The number of stages drives the quality of the water output. Most brewing systems have 6 or more filtration stages to reduce total dissolved solids from 300-500 ppm down to 1-10ppm. I would recommend at least 5-7 stages for a typical brewing RO system. - Flow Rate: Reverse Osmosis is a time consuming process as the water needs to be pushed under pressure through each of the stages. Small RO systems are typically rated in Gallons Per Day (GPD) or Liters Per Day. This is the ideal volume the system can produce in a single 24 hour period. To put it in perspective a 100 GPD system would only produce about 4.2 gallons (15.9 liters) of pure water in an hour. So you need to consider how much water you want to use for a typical batch and how long you are willing to wait to fill your mash and sparge tun as well as any extra water. 50 GPD is probably a bare minimum for a home system, with 100 GPD or larger providing better capacity. -…

    Not rated yet
  • Your Tasting Brain with Randy Mosher – BeerSmith Podcast #349

    Randy Mosher joins me to discuss his just released book “Your Tasting Brain” which covers the complex science of taste, flavor, aroma, mental models and practical tasting. Subscribe on iTunes to Audio version (https://itunes.apple.com/us/podcast/beersmith-home-beer-brewing/id398500515?mt=2)or Video version (https://itunes.apple.com/us/podcast/beersmith-home-beer-brewing/id824963861) or Spotify (https://open.spotify.com/show/7vwQRBi8HJBpePV3I7Dpj5)or Google Music (https://music.youtube.com/playlist?list=PLmt3Is-jbBLXos-tmhHJ2e_tCMQooh7gj&si=JnITvPpXDFmKOO_I) Download the MP3 File (https://traffic.libsyn.com/beersmith/BSHB-349-Mosher.mp3)– Right Click and Save As to download this mp3 file. Your browser does not support the audio element. Topics in This Week’s Episode (46:53) - This week I welcome back Randy Mosher. This week Randy Mosher joins me to discuss mental models, ingredients, tasting, and how these factors all play into designing great beers. Randy is the author of the books Mastering Homebrew (https://amzn.to/3xqGXno), Radical Brewing (https://amzn.to/3gRwHyH), and Tasting Beer (https://amzn.to/3eCix1P). (Full disclosure: Amazon affiliate links to books) He’s also partner in two breweries near Chicago Five Rabbit (https://www.5rabbitbrewery.com/) and Forbidden Root. (http://www.forbiddenroot.com/) - We briefly discuss the status of Randy’s two breweries. - Next we dive into Randy’s new book Your Tasting Brain (https://a.co/d/04P5in4x) (Amazon affiliate link). Randy divides the book into two major sections: science and practical tasting. - We talk about the senses: taste, mouthfeel and smell and how the all are combined together in the brain to create the perception of flavor. - Randy discusses the human nose which is incredibly sensitive – able to detect some compounds in concentrations as small as parts per trillion. - He tells us how the brain condenses a ton of sensory information into a single perception of flavor, and also how hard it is to decompose individual tastes and aromas once the brain has combined them. - Randy explains how genetic, cultural and personal experiences all shape how we perceive flavors and aromas and can actually result in two people getting markedly different experiences from the same food and drink. - We also explore how hard it is to capture flavors in speech. - In section 2, Randy talks about practical tasting, and we discuss some of the flavors that are important to alcoholic beverages. - He discusses judging beer and how one might get better at it over time with practice. - We talk about environmental factors and how music, lighting, temperature, and foods we are eating can all affect what we experience with taste. - Randy mentions his website and newsletter which you can find linked on RandyMosher.com (https://randymosher.com/) - Randy shares his closing thoughts. Sponsors - The podcast is sponsored by BeerSmith 4 (http://beersmith.com), and BeerSmith Web (https://beersmithrecipes.com). You can subscribe to the BeerSmith newsletter (https://beersmith.com/blog/subscribe/) for free to get some great articles on home brewing. iTunes Announcements: I launched a new video channel for the BeerSmith podcast on iTunes (https://itunes.apple.com/us/podcast/beersmith-home-beer-brewing/id824963861), so subscribe now! At the moment it will only feature the new widescreen episodes (#75 and up). Older episodes are available on my revamped Youtube channel (http://youtube.com/mrbeersmith). Also all of my audio episodes are on iTunes (http://itunes.apple.com/podcast/beersmith-home-brewing-blog/id398500515) now – so grab the older episodes if you missed any. Thoughts on the Podcast? Leave me a comment below or visit our discussion forum (http://beersmith.com/forum) to leave a comment in the podcast section there. Subscribe to the Podcast on iTunes You can subscribe to the audio or video using the iTunes links below, or the feed address - Audio feed on iTunes –…

    Not rated yet
  • Exploring the Art of Whirlpool Hopping: Enhancing Beer Flavor and Aroma

    https://d3pddo38v7j30h.cloudfront.net/blog/wp-content/uploads/2026/06/Boiler-Web.jpg This week I take a closer look at whirlpool hopping techniques, hop stands, what whirlpool hops bring to a beer and how you can maximize your hop aroma and flavor using this technique. The Whirlpool Hopping Technique The term Whirlpool Hopping is named after the whirlpool stage in commercial brewing that takes place after the wort has been boiled, but before the wort is transferred to a fermenter. On many commercial systems after flame out (or steam off), hot wort is circulated rapidly in the kettle creating a rotational flow that allows solids including grain bits, hop particles, proteins and polyphenols to gather in a tight cone and settle to the bottom of the vessel. Wort is pumped from the outer edge of the whirlpool through a chiller (or heat exchanger) to cool the wort and then into the fermenter. This allows the sediment, often called the hop cone or trub in the center of the boil vessel so it does not all make its way to the fermenter. As brewers came to a better understanding about the volatility of hop oils as covered in this article (https://beersmith.com/blog/2024/12/19/major-aromatic-hop-oils-in-beer-brewing/) and also this one (https://beersmith.com/blog/2022/05/05/why-most-beer-brewers-today-use-a-single-boil-addition/), the idea of adding hops in the whirlpool stage where temperatures are below boiling came into fashion. The advantage of the whirlpool stage is that the wort is still hot enough to promote absorption of many aroma oils but not so hot that volatile aroma oils evaporate. Whirlpooling at a Homebrew Level – The Hop Stand Most homebrewers do not have a pump and extraction system set up to create a rotational whirlpool flow in their boiler. However many of us do use whirlpool hop additions by simply allowing the boiler to sit for a period of time after flame out, called a “Hop Stand.” We then add our whirlpool hops at an appropriate time and temperature to achieve the desired result. So for example we might add hops when the wort chills down to 80 or 90 C (175-194 F) and leave the hops for 20 minutes while the wort chills slightly before siphoning or pumping it through a chiller to the fermenter. Those using an in-the-boiler chilling coil might leave the wort hot during their whirlpool addition and then chill at the end of the desired exposure time before transferring to a fermenter. Whirlpool Considerations Whirlpool hops also add some bitterness to the beer (https://beersmith.com/blog/2019/12/18/hop-utilization-in-the-whirlpool-for-beer-brewing/) because hop alpha acids continue to isomerize at typical whirlpool temperatures. While this is not typically the purpose of adding whirlpool hops it can be a benefit if you are looking for a bit more bitterness in the beer. The decision of how hot your wort should be when whirlpooling as well as the total exposure time of hops in the whirlpool will drive bitterness added, though it also affects aroma as whirlpooling at lower temperatures can aid in retaining aromas oils. There is no hard and fast rule with regards to how hot or how long to whirlpool hops. Higher temperatures clearly promote more bitterness, but higher temperatures also run the risk of volatilizing fragile aroma oils. Longer time periods can aid in getting more aroma oils into the wort, but there is typically no good reason to whirlpool for hours. I would say those focused on aroma oils will choose temperatures in the 60-70 C (140-158 F) range with exposure times of typically 20-40 minutes. There is usually little benefit to going longer than that. Choice of hops for the whirlpool is important. Yakima Chief Hops famously did a study (https://beersmith.com/blog/2021/11/05/hop-aroma-oil-survivability-in-beer-brewing/)a few years back on survivable hop compounds and they showed that some hops did much better than others at surviving the whirlpool and fermentation process…

    Not rated yet
  • The Best Ways to Make a Crystal Clear Beer

    https://d3pddo38v7j30h.cloudfront.net/blog/wp-content/uploads/2026/06/shutterstock_499880398-scaled.jpg While styles such has Hazy IPA are popular at the moment, this week I explore how to make a crystal clear haze-free beer for popular beer styles including Pilsners, Lagers, and many Ales. Haze is simply suspended particles in a beer that reflect light. It comes from yeast cells, proteins, polyphenols (tannins) primarily but bacterial, foreign material and excessive finings can also contribute to haze. If you want to read more about haze and its causes I wrote a multi-part article on beer clarity and finings here (https://beersmith.com/blog/2014/08/21/improving-beer-clarity-and-finings-in-depth-part-1/). However here is a summary of some of the easiest ways to reduce haze in your finished beer and create a crystal clear ale or lager: 1. Select Lower Protein Grains As I mentioned above one of the primary causes of haze in beer is from protein. Malts or adjuncts high in protein like what malt, oats, flaked barley, various cara-malts (like Carafoam and Cara-pils), and many Caramel and Crystal malts contain a lot of proteins that tend to survive the brewing and fermentation process and create haze in your finished beer. Choose lower protein malts like Pilsner, pale malt, and lighter kilned or base malts (https://beersmith.com/blog/2022/09/11/kilned-malts-in-beer-brewing/) for a clearer beer. All major malsters publish a malt data sheet on their website for various malts that includes the protein percentage for the malt. 2. Choose a Yeast Strain with High Flocculation Flocculation (https://beersmith.com/blog/2025/02/21/yeast-flocculation-and-beer-brewing/)refers to how fast a given yeast strain tends to clump, aggregate and fall out of the beer after fermentation to form a sediment at the bottom of your fermenter. Yeasts with low flocculation can stay in solution for a long time, creating a haze that can ruin the presentation of your beer. If you select a yeast strain with a high or very high flocculation profile it will clear more quickly when fermentation is complete. Virtually all yeast labs provide flocculation data on their website or yeast data sheet. 3. Use End of Boil Finings Adding finings (https://beersmith.com/blog/2008/12/30/fining-agents-improving-beer-clarity/) at the end of the boil can help proteins and tannins in the hot wort clump together and fall out of solution. Typically these finings are positively charged and attract proteins and tannins. Two of the most common boil finings used at the homebrew level are irish moss and whirlfloc tablet, both of which have the same active ingredient. These are added shortly before the end of the boil. 4. Chill Your Wort Quickly Quickly chilling your beer down to room temperature after the boil and whirlpool helps proteins and tannins to precipitate out of the hot wort. Indeed the “trub” or sediment left after the boil is made largely of grain particles, and clumped proteins and tannins. A rapid drop from boil temperatures down to fermentation temperature aids these compounds in dropping out leaving less in the finished wort that might eventually lead to clarity problems. 5. Add A Post Fermentation Fining Agent A variety of fining agents (https://beersmith.com/blog/2008/12/30/fining-agents-improving-beer-clarity/) are available that can be used post-fermentation. Like end of boil finings, these additives help yeast, tannins and proteins to clump together and fall out of solution in the finished beer quickly. One of the easiest to find is plan unflavored gelatin from the grocery store. In the US it is sold in small packets and one packet is sufficient for a 5 gal (19 l) batch. Dissolve it in sanitzed or boiled water and add it directly to the fermenter a few days before bottling. Polyclar is another good choice available from many homebrew shops. Some professional brewers also use Isinglass. 6. Cold Crash and Cold Store Your Beer Performing a cold crash…

    Not rated yet
  • BeerSmith 4 Water Profile Features

    https://d3pddo38v7j30h.cloudfront.net/blog/wp-content/uploads/2026/08/WaterProfile.png This week I take a close look at the many changes to the water profile features in BeerSmith 4. The water profile estimation and matching was significantly overhauled in the new version of BeerSmith to make it easy to use and more accurate. Water Salt Forms and Molecular Weights In BeerSmith 3 most of the water salt additions were in their dry (annhydrous) form. Unfortunately, Calcium Chloride was calculated using numbers for the hydrous form. Since most home and professional brewers use typical water salts in their dry form, for BeerSmith 4 the Calcium Chloride numbers for the annhydrous form are now used. In addition, I calculated all of the water salt factors from scratch starting with their molecular weights. Calcium Carbonate (chalk), for example, had numbers that were slightly off and are now updated. This gives more accurate results across the board when doing water matching or water salt calculations. In addition the chemistry on items like Chalk and Pickling lime were altered to reflect the way the ions chemically break down during the mash. New Water Adjustment Salts and Features For some time brewers have been asking that pickling lime be added as an option in BeerSmith. I included this in BeerSmith 4 along with the warning that it is best added after the start of the mash to prevent precipitation. Magnesium Chloride (MgCl) was also added as an option for salts though it is less commonly used at the homebrew level. When matching water salts in a recipe using the Match a Target Water Profile button I included new checkboxes to exclude Pickling Lime or exclude Chalk since it is rare that both are used together, and chalk often dissolves poorly in water. In a recent update I also added a box for excluding Magnesium Chloride when matching water profiles as many homebrewers don’t have access to that. How to Match a Water Profile Matching a water profile is as simple as adding your base water profile on the water tab with the correct overall volume, and then using the Match a Target Water Profile button to pick a target water profile. BeerSmith 4 will calculate the best fit for that water profile and add the salts needed to the recipe when you press OK. There is a complete video tutorial of the process here if you want to see how it is done (https://www.youtube.com/watch?v=en4el24OQ8w). In the recipe builder there is also a checkbox to hold sparge salts until the boil on the water tab which is something many brewers asked for, as the sparge salts do not substantially affect the mash chemistry. This option will only show up if you have a separate sparge step. For brew in a bag or no-sparge mash profiles the option is hidden as there is no sparge salt to combine. Water Profiles into the Boil and Fermenter While most all grain brewers are focused on matching a given water profile in the mash to optimize their mash chemistry, BeerSmith 4 now also estimates your mash profile post-boil and also into the fermenter by accounting for boil off and other losses. This is a nice feature for those who want to understand what the water profile looks like in the finished beer. Water Profiles for Extract, Mead, Cider, Seltzer and Wines Extract brewers often use a neutral base water and rely on the concentrated malt extract to get the water profile about right. However you can now adjust water profiles for extract brews from the water tab to get more control over your beer. While mead, cider, seltzer and wine makers are not often water-focused, clearly the water you use has a large impact on the finished product. BeerSmith 4 lets you use the same water matching tools an all-grain brewer uses. For these type of beverages, BeerSmith 4 attempts to match the chosen water profile into the fermenter. It therefore estimates the salts needed when making your mead, wine or cider with the goal of achieving that profile in the fermenter. This should…

    Not rated yet
  • Craft Malting with Jeff Bloem – BeerSmith Podcast #348

    Jeff Bloem joins me from Murphy and Rude Malting in Virginia to discuss challenges his business has had producing craft malt, his new partnership with Carolina malts and his craft malt offerings. Subscribe on iTunes to Audio version (https://itunes.apple.com/us/podcast/beersmith-home-beer-brewing/id398500515?mt=2)or Video version (https://itunes.apple.com/us/podcast/beersmith-home-beer-brewing/id824963861) or Spotify (https://open.spotify.com/show/7vwQRBi8HJBpePV3I7Dpj5)or Google Music (https://music.youtube.com/playlist?list=PLmt3Is-jbBLXos-tmhHJ2e_tCMQooh7gj&si=JnITvPpXDFmKOO_I) Download the MP3 File (https://traffic.libsyn.com/beersmith/BSHB-348-Bloem.mp3)– Right Click and Save As to download this mp3 file. Your browser does not support the audio element. Topics in This Week’s Episode (39:25) - This week I welcome back Jeff Bloem. Jeff is the founder and head malster at Murphy & Rude Malting (https://www.murphyrudemalting.com/) in Charlottesville, VA. Opening in 2018, they are Virginia’s first dedicated commercial specialty malt house producing a wide variety of base, high kiln and specialty malts for brewers and distillers. He has partnered up with Carolina Malt House (https://www.carolinamalt.com/) to produce a number of joint malts. - Jeff ran into a series of difficult challenges with his malting business this Spring. He explains how a production move, and bad batch of malt created unsolvable problems for his business. - We also discuss how he partnered at the last minute with Carolina malting to rescue the business and Jeff tells us how his production partnership works. - Jeff tells us about his partnership with Carolina malt in detail. - I ask about the Craft Beer industry which is under a lot of pressure to cut costs, but he says Craft malting is still doing well. - We talk about the strong business case for locally and artisanal brewing ingredients and Jeff tells us about what these ingredients bring to beer. - Jeff talks about his current production lineup of Craft malts as well as the malt Carolina Malting has brought to the partnership. - We discuss his “GrainStore” shop which is temporarily offline. Jeff is hoping to reopen it shortly if he can find the right partner. - Jeff tells us where you can buy Murphy and Rude and also Carolina malts. - He shares his closing thoughts. Sponsors - The podcast is sponsored by BeerSmith 4 (http://beersmith.com), and BeerSmith Web (https://beersmithrecipes.com). You can subscribe to the BeerSmith newsletter (https://beersmith.com/blog/subscribe/) for free to get some great articles on home brewing. iTunes Announcements: I launched a new video channel for the BeerSmith podcast on iTunes (https://itunes.apple.com/us/podcast/beersmith-home-beer-brewing/id824963861), so subscribe now! At the moment it will only feature the new widescreen episodes (#75 and up). Older episodes are available on my revamped Youtube channel (http://youtube.com/mrbeersmith). Also all of my audio episodes are on iTunes (http://itunes.apple.com/podcast/beersmith-home-brewing-blog/id398500515) now – so grab the older episodes if you missed any. Thoughts on the Podcast? Leave me a comment below or visit our discussion forum (http://beersmith.com/forum) to leave a comment in the podcast section there. Subscribe to the Podcast on iTunes You can subscribe to the audio or video using the iTunes links below, or the feed address - Audio feed on iTunes – http://itunes.apple.com/podcast/beersmith-home-brewing-blog/id398500515 (direct: http://beersmith.com/content/feed/podcast) - Video feed on iTunes – https://itunes.apple.com/us/podcast/beersmith-home-beer-brewing/id824963861 (direct: http://beersmith.com/tv/category/podcast/feed/ ) - Audio podcast on Google Play here (https://podcasts.google.com/?feed=aHR0cDovL2JlZXJzbWl0aC5jb20vY29udGVudC9mZWVkL3BvZGNhc3Qv&hl=en) And finally, don’t forget to subscribe to the blog and my newsletter (https://beersmith.com/blog/subscribe) (or link at the top…

    Not rated yet
  • How to Choose The Best Malt Mill For Your Home Brewery

    https://d3pddo38v7j30h.cloudfront.net/blog/wp-content/uploads/2015/09/barleycrushers.jpg This week I take a look at malt mills designed for brewing beer and cover some of the major features you should be looking for in a high quality malt mill. A good malt mill for home brewing will likely last you a lifetime, so choosing the right mill is an important step. Malt Mill vs Grain (Flour) Mill The first thing you need to know when choosing a new malt mill is that a malt mill is not the same as a grain (flour) mill. The mills you buy to make flour crush wheat, rye, oats, corn and other grains into a find powder. There are several variants of grain mills including stone mills that use two circular stones, burr mills which use two steel or ceramic plates, and impact mills that crush the grains. The problem with using a flour mill to crush your malt is that it leaves a find powder with no intact husks. The husks actually serve as a filter bed for the grains during sparging, so malt crushed to a find flour will often result in a stuck sparge as well as excess grain particles in the boiler. So you really never want to use a traditional flour mill to crush your brewing grains. Key Brewing Malt Mill Characteristics The best type of malt mill by far is a dual roller mill, typically with both rollers made of steel. The reason you want a dual roller mill is that crushing grains between the two rollers allows you to finely crush the interior of the barley see while still maintaining larger pieces of the husk intact. These husk pieces help form a natural filter bed when you sparge the grain in a traditional system or remove the grain bag/grain filter in a BIAB or all-in-one system. Here are some of the key characteristics to look for in a good malt mill: - Dual steel rollers to crush the grain. Most of these have a ‘knurl’ which is a textured finish to aid in pulling the grain through. My mill has a 12 tpi knurl. - The gap between the rollers should be fully adjustable. I use a 0.039″ (1 mm) gap on mine though you may need to adjust that slightly depending on your malt and exact mill. Ideally you want the interior of the grain well crushed to a fine powder while retaining large pieces of husk intact. - You should have a 7-15 lb capacity hopper for home use so you can put most of a batch of grain into the hopper at once. Obviously commercial mills have larger capacities. - The mill should have a solid wood or metal base. For home use typically the mill laid on top of a standard 5 gallon (19 l) bucket so the milled grains fall into the bucket. Its a good idea to mill grains well outside of your normal brewing area as milling can generate a lot of dust and malts have naturally occurring bacteria on them. You don’t want to kick up a big cloud of dust and risk infecting your fermentation or cooling equipment. - You should have a long metal arm on the mill, or alternately the ability to connect a household drill to motorize it. Some more sophisticated mills actually come with a motor attached to the mill. A well built steel mill will last most homebrewers a lifetime, and they give you the ability to store grains in a whole form and freshly crush them when needed on brew day. I hope you enjoyed this week’s article on grain mills. Thanks for joining me on the BeerSmith Home Brewing Blog (https://beersmith.com/blog). If you want to take the guesswork out of brewing, please try my BeerSmith 4 recipe software from BeerSmith.com (http://beersmith.com). Be sure to sign up for my newsletter (https://beersmith.com/blog/subscribe) or my podcast (https://beersmith.com/blog/category/podcast/)(also on itunes (https://itunes.apple.com/us/podcast/beersmith-home-brewing/id398500515?mt=2) and youtube (http://www.youtube.com/mrbeersmith)) for more great tips on homebrewing.

    Not rated yet
  • Abita Brewing, NA Beer and Hops with Mitch Steele – BeerSmith Podcast #347

    Mitch Steele joins me from Abita Brewing to discuss his new position as Director of Operations, Non-Alcoholic (NA) beer brewing and his experience with hop derived products. Subscribe on iTunes to Audio version (https://itunes.apple.com/us/podcast/beersmith-home-beer-brewing/id398500515?mt=2)or Video version (https://itunes.apple.com/us/podcast/beersmith-home-beer-brewing/id824963861) or Spotify (https://open.spotify.com/show/7vwQRBi8HJBpePV3I7Dpj5)or Google Music (https://music.youtube.com/playlist?list=PLmt3Is-jbBLXos-tmhHJ2e_tCMQooh7gj&si=JnITvPpXDFmKOO_I) Download the MP3 File (https://traffic.libsyn.com/beersmith/BSHB-347-Steele.mp3)– Right Click and Save As to download this mp3 file. Your browser does not support the audio element. Topics in This Week’s Episode (49:27) - This week I welcome back Mitch Steele. Mitch is author of the book IPA: Brewing Techniques, Recipes and the Evolution of India Pale Ale (http://amzn.to/2oWQrpM) (Amazon affiliate link). Mitch is also the former brewmaster at Stone brewing and is has recently taken a new job as Director of Operations at Abita Brewing (https://abita.com/). - We start with a discussion about Mitch and his transition this year from New Realm Brewing to Director of Operations at Abita which is a fairly large regional brewery. - I ask Mitch about his brewing career which actually spans Annheuser-Busch, Stone, New Realm and now Abita. - After discussing his career, we switch to talking about Non-Alcoholic (NA) beer. While Mitch was previously using vacuum distillation, he has now switched to instead using a combination of high mash temperatures, maltose negative yeast, and other process changes to make NA beers. - Mitch and I discuss lower alcohol beers (3%) and whether this might be a new trend or just a fad? - We next switch to discussing the many new hop derived products which can be applied to just about any phase of the brewing process to reduce losses, and enhance bitterness and aroma. - Mitch explains the advantages and disadvantages of using many of these new hop products. - We have a short discussion on fruit beers, which are very popular at Abita. Mitch tells us how he best applied fruits to accent his beers. He also explains which fruits work best for providing structure and flavor. - He shares his closing thoughts. Sponsors - Thank you to our sponsor Craft Beer and Brewing Magazine (http://beerandbrewing.com) for sponsoring this episode. I encourage you to subscribe to their great magazine! - Also check out BeerSmith (http://beersmith.com), BeerSmith Web (https://beersmithrecipes.com), BeerSmith Mobile software (http://beersmith.com/mobile) and the DVDs John Palmer and I filmed (http://beersmith.com/dvd) – How to Brew with Malt Extract and How to Brew All Grain are available now. You can subscribe to the BeerSmith newsletter (https://beersmith.com/blog/subscribe/) for free to get some great articles on home brewing. iTunes Announcements: I launched a new video channel for the BeerSmith podcast on iTunes (https://itunes.apple.com/us/podcast/beersmith-home-beer-brewing/id824963861), so subscribe now! At the moment it will only feature the new widescreen episodes (#75 and up). Older episodes are available on my revamped Youtube channel (http://youtube.com/mrbeersmith). Also all of my audio episodes are on iTunes (http://itunes.apple.com/podcast/beersmith-home-brewing-blog/id398500515) now – so grab the older episodes if you missed any. Thoughts on the Podcast? Leave me a comment below or visit our discussion forum (http://beersmith.com/forum) to leave a comment in the podcast section there. Subscribe to the Podcast on iTunes You can subscribe to the audio or video using the iTunes links below, or the feed address - Audio feed on iTunes – http://itunes.apple.com/podcast/beersmith-home-brewing-blog/id398500515 (direct: http://beersmith.com/content/feed/podcast) - Video feed on iTunes –…

    Not rated yet
  • How to Chill Beer Quickly: Tips for Every Beer Enthusiast

    https://d3pddo38v7j30h.cloudfront.net/blog/wp-content/uploads/2026/07/Cooler-Beer-web.jpg This week I take a look at how to rapidly chill your beer in the shortest time possible so you can enjoy it with friends. We’ve all been there. The party is in an less than an hour and you need to rapidly chill your beer down to serving temperature before the guests arrive. Putting your beer in a typical refrigerator can take as much as 4-6 hours to reach serving temperature. But what is the best way to safely take beer from room temperature to 40F (5 C) quickly? Why The Freezer is Not The Best Option The first idea that comes to mind for most people is to simply put your beer in the freezer for a short time to chill it down. The freezer has a constant temperature slightly below freezing, so the temperature differential between the beer and freezer should get you there quickly, right? Unfortunately in the freezer, your bottles or cans emit heat by conduction and convection. This happens through the surface of the bottle or can. However air is not a great conductor of heat, so it can take 30-60 minutes to chill the beer. Using another medium to conduct the heat like water is more efficient and will chill the beer more quickly. Also you run the risk of freezing the beer and bursting the bottles or cans if left too long in a freezer. The Fastest Option – Salt, Ice and Water – 5 to 7 minutes Water is a good conductor of heat, so immersing your beer in an ice bath will chill it much more quickly than a freezer. If you add a generous handful of salt to your cooler, the solution will chill even more quickly. Salt dissolves the film of liquid water on the surface of ice, effectively lowering the freezing point below that of the ice. So ice that is in direct contact with salty water melts more quickly, absorbing large amounts of heat as it transitions from ice to water. To make a salt-ice bath, start with a medium size cooler. Add approximately equal parts of ice and water, and then add 2-3 tablespoons of salt per quart (or liter) of water. Stir the mixture until it dissolves and immerse your beer completely in the mixture. Ice in a salt water bath can chill your beer very rapidly, often in as little as 5 to 7 minutes. If you want them to chill even more quickly you can swirl or mix the ice around the beer to create convection in the ice-water bath. Since the bath won’t easily drop below freezing, you also avoid the risk of freezing the beer. Water and Ice In A Cooler – 15-20 minutes If you don’t have any salt, but have ice and a cooler, adding water to your cooler can still deliver cold beer quickly. Add enough water to immerse the beer, and its not a bad idea to periodically mix or flip the bottles/cans to get good convection in the cooler. Adding the water is important as it conducts the heat away from the beer and melts the ice more quickly resulting in a significant improvement over ice alone. This method also eliminates the risk of the beer freezing. Wet Paper Towel in a Freezer – 10-15 minutes If you are lacking rock salt and a cooler, you can still use your freezer to chill your beer quickly. In this case, wrap each beer in a wet paper towel or cloth and put them in the freezer. The water from the towel will rapidly evaporate and also conduct heat away from the beer. This method works about 2-4 times faster than simply putting the beer in the freezer and letting the air around the containers operate. Set a timer for 10 minutes and check the beer. It should take about 10-15 minutes to reach serving temperature, then remove the beer from the freezer and put it in the fridge. Failing to set a timer and leaving the beer in the freezer too long can lead to the bottles or cans actually freezing, and they could burst, so be sure to closely monitor them while they are in the freezer. What is the Right Serving Temperature? While you may think colder beer is always better, it turns out that different beer styles actually are best at…

    Not rated yet
  • A Comprehensive Guide to Mead Making: Modern Techniques and Ingredients

    https://d3pddo38v7j30h.cloudfront.net/blog/wp-content/uploads/2023/12/mead.jpg This week I take a look a the fine art of making mead and how modern mead techniques have revolutionized the hobby. In particular I look at how we can take a process that once tool a year or more and cut the timeline down to 30-60 days. Also the average home brewer has about 95% of the equipment needed to make mead. Mead Making History and Older Techniques Mead is arguably the oldest fermented beverage. Vessels in China dating to 7000 BC have organic compounds consistent with fermented honey, and as you can spontaneously ferment honey mixed with water, it is very likely that mead was enjoyed by hunter-gatherer societies and pre-dates the rise of agriculture. While mead was revered as the “nectar of the Gods” in ancient Greece, and played a central role in a variety of religions and ceremonies it has largely faded to become a niche drink in modern times. Mead is simply wine made from a honey base. You can literally take honey mixed with water in an open vessel and it will spontaneously ferment from wild yeast. Modern mead styles span a wide range of additional ingredients including melomels from honey and fruit, pyment made with honey and grapes, spiced meads, and braggot which is a combination of mead and beer. Also there are varietal meads made from various varieties of honey which take on the flavor of the underlying honey like mesquite or orange blossom. The traditional method for mead making is to use honey, water, yeast and if desired fruit or other additives and ferment them in a closed vessel. However honey lacks many nutrients, notably nitrogen, so it can take 12-18 months for a mead made in this way to completely ferment. The results can be great, but many of us in the modern era don’t have a year and a half to wait for our mead to reach maturity. Modern Mead Making Given the lack of nitrogen in honey, one obvious way to speed up your mead fermentation is by adding nutrients. However, additional techniques have been developed, largely by home mead makers to accelerate the overall process even further and create even a high gravity mead in as little as 60 days. Lower gravity session meads can be fermented for serving in as little as two weeks. While covering all of the different mead styles, design of mead recipes and possible techniques would easily fill a book, I’m going to cover the making of meads with fruit below. High gravity fruit meads are my favorite mead style, and the one I make the most, so I’m going to cover those. Note that you can use BeerSmith software (version 3 or 4) to formulate your recipes (https://beersmith.com/blog/2018/06/11/mead-making-with-beersmith-3-software/), and I did cover basic mead making in an article here (https://beersmith.com/blog/2013/09/20/making-mead-for-home-brewers/). I also wrote two articles for BYO a few years back one titled Modern Meadmaking (https://byo.com/articles/modern-mead-making/) and another titled Melomels: Brewing Big Fruit (https://byo.com/articles/melomels-brewing-big-fruit-mead/), though both of these are behind the BYO paywall at the moment. Here are the elements of modern mead making: - Cold Preparation of Ingredients: Virtually all modern mead makers I’ve interviewed or worked with do not boil their honey or fruit as it can lead to flavor and aroma loss. Instead honey is thinned a bit with water and added directly to the fermenter. Whole fruit is washed and then often frozen to break up the cell walls and then thawed and added to the fermenter. I prefer to use a grain bag to contain the fruit, which also allows me to remove it after a week or so to minimize losses and avoid the fruit going bad. Making mead is simply a matter of mixing honey, water and fruit in the correct proportions for your recipe. - Proper Yeast Hydration: Most mead makers use dry wine yeast as it has a higher alcohol tolerance. The top yeast, by far, used by mead makers is Lalvin 71B Narbonne dry…

    Not rated yet