Leaky Windows Are a Nightmare! Here’s How I Seal the Opening
From HAUS PLANS ®️ · · 1 min

The player loads from YouTube only when you click. It uses YouTube's privacy-enhanced mode.
If the video does not play, the owner may have turned off embedding. Watch it on YouTube instead.
Description
Leaky windows are a nightmare, but the window is only half of what keeps the water out. The other half is the prep you do before it goes in. Look at this crack where the pressure treated wood has shrunk. I’m going to flash this entire opening with a seamless membrane. But first I gotta deal with some red tape. Because this window is going in a foundation wall with jagged concrete, I’m going to use Liquid Flash. I start by putting a bead between the pressure treated wood and the concrete. Then, I add a bead on either side. Next, I use a putty knife to smooth it all out and fill in the gaps. This can be a messy job, but the tape helps to keep a clean line. I try to get the liquid flash about 12 Mils thick, or another way to look at it is thick enough so that I can’t see through it. Next, I’m going to liquid flash the entire sill and I go up at least 6 inches on the sides. This way if any water ever does leak in and sits on the sill it will be less likely to rot out. Now for the most rewarding part…. Peeling off the tape. Not to toot my own horn, but that looks awesome; and I’m glad to be done with all this red tape. @hausplans
#build #howto #construction #diy #contractor #home #windows