Skip to main content
AmigoFish

I Tried to Build a 1,000 lb Wrecking Ball in My Garage

From HAUS PLANS ®️ · · 1 min

The player loads from YouTube only when you click. It uses YouTube's privacy-enhanced mode.

If the video does not play, the owner may have turned off embedding. Watch it on YouTube instead.

Watch on YouTube

Not rated yet

Description

I’m building a 1,000-pound wrecking ball in my garage.

It’s going to be made out of concrete and I’m using an ocean buoy for the form.

I built a crate around the buoy to support it; then I cut the top off so we could fill it with concrete.

Here’s the problem, I need a way to attach a chain to my wrecking ball.

I’m going to use a draw bar for a tractor and a shackle.

But first I need to cut off the end of the draw bar so the shackle can swing freely.

I’m planning to insert this draw bar into the concrete while it’s wet.

So, I cut up some grade pins and tack them to the draw bar- this way it won’t pull out of the concrete.

Next, I mix up concrete with a special ingredient- reinforcing fiber.

This wrecking ball is going to take a beating, and the fiber will keep it from cracking apart.

I used 13 bags of concrete- so it weighs closer to 700 pounds, but it will definitely get the job done!

I put in some steel grade pins for reinforcement and finally the draw bar.

I can’t wait to use this! Let me know what would you like to see me demolish? @hausplans

#build #howto #construction #diy #contractor

Back to HAUS PLANS ®️ · Report a problem