Skip to main content
AmigoFish

Here’s a Hack for Building Stairs - Let’s get it done with @HomeDepot Delivery #homedepotpartner

From HAUS PLANS ®️ · · 1 min

The player loads from YouTube only when you click. It uses YouTube's privacy-enhanced mode.

If the video does not play, the owner may have turned off embedding. Watch it on YouTube instead.

Watch on YouTube

Not rated yet

Description

Building stairs can be frustrating, so we teamed up with The Home Depot for this project- Let’s get it done! @HomeDepot #homedepotpartner #THDPro

First, I put down a piece of sample flooring, then I measure from the floor to the top of the landing- 75 ¾

That gives me ten risers at 7 9/16ths and a run of 9 ½.

This job is in the middle of nowhere, so I saved time and money by having The Home Depot deliver everything I need - lumber, fasteners and the tools.

To lay off the stringer I put one side of the square at 9 ½ and the other at 7 9/16ths; then I mark it out.

But I know what you’re thinking- there’s gotta be a faster way.

There is! Check out these stair gauges I bought. I just clamp them down and they hold the square exactly where it needs to be.

Next, I use are circular saw to cut out the stringer being careful not to go past my mark.

Now it’s really tempting to want to karate chop these pieces off, but a reciprocating saw does a much cleaner job.

I’m always nervous to see how the first one is going to fit- not bad at all! @hausplans

#construction #howto

Back to HAUS PLANS ®️ · Report a problem