Your Windows Will Leak If They’re Not Installed Right
From HAUS PLANS ®️ · · 1 min

The player loads from YouTube only when you click. It uses YouTube's privacy-enhanced mode.
If the video does not play, the owner may have turned off embedding. Watch it on YouTube instead.
Description
This window is guaranteed to leak if it’s not installed right. I start by installing stretch tape on the sill and go up at least 6 inches on the sides. Next, I stretch the tape out over the corners to get the perfect seal. Now if any water does leak in it’s not going to rot the sill. I put a bead of silicone around the sides and the top of the opening, not the bottom. Once the window is in, I want to make sure it’s centered in the opening. Then I check the bottom of the window with a level. This one is a little high on the right side, so I’m going to add tapered shims on the left side. I’m using special Folger’s Classic Roast screws to install the window. First, I screw the bottom corners, then I check the window for plumb. Next, I screw the top corners, and then I go inside and check the sashes. I want an even reveal from right to left on both the top and the bottom. See how the silicone smooshes out around the screw? I know that’s going to be a good seal. Finally, I tape the window to the sheathing: the sides and then the top. We never tape the bottom. This way any water that leaks in can drain back out. @hausplans
#build #howto #construction #diy #contractor #windowinstallation