Skip to main content
AmigoFish

I Could Fix This, But It Would Fail Inspection

From HAUS PLANS ®️ · · 1 min

The player loads from YouTube only when you click. It uses YouTube's privacy-enhanced mode.

If the video does not play, the owner may have turned off embedding. Watch it on YouTube instead.

Watch on YouTube

Not rated yet

Description

So what if you accidentally break a roof truss? This is not something you can fix yourself. Here’s what I do, I take pictures of the breaks and send them along with the truss number to the manufacturer; then, they give me an engineered repair. They’re saying I need two gussets made from 7/16” OSB. OSB is way stronger than people think- it’s not chip board; it’s oriented strand board. It also doesn’t delaminate like plywood when it gets wet. The gusset needs to be centered over the break. Let’s check out the nailing pattern. The repair calls for a row of three nails every two inches, and it says to use 2” nails. I take the time to mark out the nailing pattern, so I know exactly where to nail and how far to stay away from the edge. Now, here’s the question- could I have come up with a repair like this myself? Yes. And would it be just as strong? Probably; but it would fail inspection. Because these trusses were engineered, you have to have an engineered repair with a stamp. Luckily the inspector approved this repair. But it seems a little shady, I think he actually owns the truss company. @hausplans

#build #howto #construction #diy #contractor #truss #repair

Back to HAUS PLANS ®️ · Report a problem