Skip to main content
AmigoFish

I’m Building the World’s Strongest Porch Step

From HAUS PLANS ®️ · · 1 min

The player loads from YouTube only when you click. It uses YouTube's privacy-enhanced mode.

If the video does not play, the owner may have turned off embedding. Watch it on YouTube instead.

Watch on YouTube

Not rated yet

Description

This will be the world’s strongest step. And it goes right here- at the front of this porch on the new house we’re building First, I drilled two 5/8” holes every 18” into the concrete foundation. Then I drilled holes into these two wing walls, they extend 8 feet down to the footing below. I blew the holes out with compressed air and used a brush to scrub out the remaining dust. Next, I cut ½” rebar and used my rebar cutter to bend them into the shape of a “U”. The reason I cleaned the holes is because I’m using rebar epoxy- this will make sure the epoxy adheres both to the steel and the concrete. I inserted “L” shape pieces of rebar down into the wing walls- these wings walls are tied into the foundation and designed to support the weight of the step. I had a scrap piece of #8 one-inch rebar, and I thought this would be the perfect place to use it. I installed it so it will sit right in the middle of the step, and then I put a ½” piece of rebar above and below it. Next, I’m gonna form it up and pour concrete. @hausplans

#build #howto #construction #diy #contractor #concrete #porch

Back to HAUS PLANS ®️ · Report a problem