Skip to main content
AmigoFish

How To Measure Deck Height with Basic Tools - Air Cooled VW Tech Tips

From Dune Buggy Warehouse · · 59 sec

The player loads from YouTube only when you click. It uses YouTube's privacy-enhanced mode.

If the video does not play, the owner may have turned off embedding. Watch it on YouTube instead.

Watch on YouTube

Not rated yet

Description

Here is one way to measure your deck height with basic tools on an Aircooled VW engine. For this video we used a set of dial calipers, deck height tool part number 5756, and a marker. This measurement way is suitable for a reasonable compression ratio street engine.

After removing the cylinder head, keep any shims for the final measurements. Install the deck height tool, screw in the set screw, and rotate the crank to touch the piston to set screw. Mark this position on the flywheel or pulley - we use the case half as the alignment. Rotate engine back the other way until you touch the piston to the set screw, and mark the flywheel or pulley again. Between these two marks is TDC - Top Dead Center.

Back off the set screw and rotate to TDC, then measure your depth with the dial calipers. Measurement should be on either end of the wrist pin to minimize the piston rocking.

Take this depth measurement (Ours was 0.576” depth), subtract the thickness of your deck height plate (ours was 0.450”), add the thickness of any head shims (one 0.060” shim on this engine) and you have your deck height total. We do recommend measuring cylinders on both sides of the engine to help verify your crankcase centerline.

Our engine measurements as example:

Our depth was 0.576” Our deck height plate thickness 0.450” One cylinder head shim 0.060”

0.576” depth -.450” plate thickness +.060” head shim =.176” deck height

Use your deck height measurement in an engine calculator, along with cylinder head CC, to help calculate compression ratio.

If you are looking for VW Type 1 Engine replacement and performance parts for your VW Air-cooled Beetle, Bug, Dune Buggy, Sand Rail, Woods Buggy or even your Thing & Ghia, check out our website: https://www.DuneBuggyWarehouse.com

Follow us on Social Media! Facebook: https://www.facebook.com/dunebuggywarehouse Instagram: https://www.instagram.com/dunebuggywarehouse

Back to Dune Buggy Warehouse · Report a problem