An Overview of New Hop Products for Beer Brewing
From BeerSmith Home Brewing ·
Playback is not available here.
Description
https://d3pddo38v7j30h.cloudfront.net/blog/wp-content/uploads/2024/12/HopCone-Web.jpg This week I take a look at some of the many new hop products available to home and professional brewers.
Important Tips
- Most pro brewers recommend using these new hop products in combination with regular (usually T90) hop pellets. Using no natural hops can leave the beer that is lifeless as the hops contain some 500+ flavor compounds.
- Many of these hop products are targeted for a specific phase of the brewing process, along with specific dosage, so you need to download and read the specification sheet for the product you are using.
- Hop and oil extracts generally cost more, but also reduce beer wastage and provide a time savings versus regular hops.
- Some extracts can be added “to taste” into finished beer which lets you adjust bitterness, aroma and flavor very late in the process.
Alpha Acid Extracts (CO2 Extracts) – For the Boil
These are concentrated flowable liquid extracts designed primarily to provide clean bittering and alpha acids during the boil. They have a high alpha acid concentration, often 65% or higher and are typically extracted from a single hop variety. They are historically the earliest extracts that hop growers devised for long storage and ease of use for large breweries. They are added directly to the kettle early in the boil.
- CO2 Hop Extract (Yakima Valley) – Sold in syringes, 150g, and 500 g cans by hop variety. Alpha acid content varies by variety from roughly 55-65%. Dosage is driven by alpha acid, so you can calculate the bitterness by using a CO2 extract hop entry with alpha acid set to the percentage on the can.
- Flex (Haas) – A flowable CO2 extract at around 65% alpha acid content. Dosage is driven by alpha acid, so you calculate the equivalent utilization using a 65% alpha acid CO2 extract entry in BeerSmith to target your beer IBU level.
- Isomerized Kettle Extract – IKE (Hopsteiner) – A hybrid isomerized CO2 extract with beta oils and hop oils that is pre-isomerized and is intended for use late in the boil, with the goal of preserving hop aroma as well as adding bitterness. It is advertised as a replacement for regular CO2 extract, but with a higher yield. Dosage is calculated based on isomerized alpha content of the product and desired IBU level in the beer.
- Hop Shot (Artisan Hops) – Small package (10 ml) for home brewers in a syringe. Sold by variety, dosage of 1ml for 60 minutes is approximately 9 IBUs, or alternately use alpha acid content of the extract which is roughly 65%.
Concentrated Hop Powders/Pellets – Whirlpool/Dry Hop
These products are made by separating the vegetative matter from the luplin gland leaving a concentrated powder or pellet. The pellet has higher alpha content and a high percentage of hop oils. These are most often used in the whirlpool and dry hopping phases to deliver some bitterness, flavor and aroma with less beer waste.
- Lupomax (Haas) – Concentrated lupulin pellets with alpha acid made using a proprietary process. For use in the whirlpool or dry hopping. Dosage rates vary widely but a good rule of thumb (from Yakima Valley) is to use 70% of your comparable T90 Hop dosage.
- Cryo Hops (Yakima Chief) – Cold concentrated lupulin pellets with resins and aromatic oils. For use primarily in the whirlpool or dry hopping, though they can also be added late in the kettle. Yakima recommends a dosage rate of 50% of your comparable T90 hop rate.
- CGX Hops (Crosby Hops) – Cold concentrated pellets. For use primarily in the whirlpool and dry hop. Crosby recommends dosage rates of 45-50% of your equivalent T90 hop rate.
SuperCritical CO2 Extracts With Alpha Acid – Whirlpool
These are flowable liquid extracts tailored for use in the whirlpool. They add both alpha acid (bitterness) and aroma oils to the beer, but significantly reduce waste versus using hop pellets.
- Incognito (Haas) – A flowable CO2 extract with concentrated alpha acids (40-55%) that adds both…