
Woodshop Life Podcast
- Format:
- Podcast
- New episodes:
- Every two weeks
- Typical length:
- about 55 minutes
- Latest episode:
About this show
Bi-Weekly Podcast Focused on the Craft of Woodworking
Covers: woodworking, hand tools, power tools, woodshop tools, furniture making, wood finishing, table saws, routers, workshop setup
Show details and episodes come from the publisher's public feed at feed.podbean.com. Last updated . Names, artwork and text belong to their publishers.
Recently on this show
Summary of recent episodes, drawn from the publisher's feed.
This podcast covers woodworking, with listeners sending in questions for the hosts to answer. Recent episodes have covered making round table legs without a lathe, dye versus stain, riving knives, shop-made veneer, and building an outfeed table.
Cosmos
Rated alike
- Chat History
Often rated the same way. - ShopNotes Podcast
Often rated the same way. - Bikes and Beards
Often rated the same way.
Similar in subject
- Wood Talk | Woodworking
Both cover: workshop setup, furniture making, wood finishing - Stumpy Nubs (James Hamilton)
Both cover: table saws, wood finishing, woodworking - Foureyes Furniture
Both cover: furniture making, wood finishing, woodworking
Similar shows
Explore more
Episodes
Bench Dog Holes, Helical Head Issues, Heating The Shop, and MORE!!!
· 1 hr 0 min
Brian's Questions: Gentlemen, I thoroughly enjoy your podcast, so thank you for all that you do. What is you opinion on dog holes in the workbench? If you use them, how? Include favorite accessories. Thank you again. Josh What is the best way to accurately put dog holes in your workbench without buying a $300 one time template tool? Josh Guy's Questions: Hi guys, Thanks for the awesome podcast, I learn new things with every show and for that I am so appreciative! I’m in the early stages of designing/building a dining table made from quarter sawn ash (just purchased a bunch of 4/4 lumber). I’ve designed the table based on a picture my wife showed me for inspiration. It is a trestle style table in which the two uprights are 16” wide by 4” thick. The ‘feet’ or ‘bases’ will be 30” wide by 6” thick, while the ‘trestle tops’ which support the table top will be 34” wide by 6” thick. The thickness of these trestles concerns me both in how much they are going to weigh, and how much material they are going to require. I’ve read about the strength of lock miter joints and am intrigued by the idea of glueing up a panel and essentially creating a hollow ‘box’ for the upright portion (boards would run vertically). I’ve read that these types of joints are very strong and I imagine they would be sufficient for this application (correct me if I’m wrong). I also like that they may give the appearance of using ultra thick 4” lumber. My question is whether you believe there will be enough wood movement in these hollow uprights to cause concern, as they will be constrained by both the feet and tops of the trestles? I just don’t have enough anecdotal experience to have a good feel for how much movement is likely to occur. Are there any good “rule of thumbs” regarding how much movement is expected to occur? I know there are a million variable (humidity swing, plain sawn vs quarter sawn, species, etc.) Thanks for your consideration and response to my question! Evan Hi, I recently upgraded my benchtop planer from a straight-knife Ridgid model to an Oliver 10045 with a helical head. I was excited by all the reviews raving about the ultra-smooth finish, but I've been disappointed. I'm getting noticeable scalloping from the inserts, even after removing them all, thoroughly cleaning the inserts and seats, and properly re-torquing them with a torque wrench. It's still requiring way more sanding: starting with 80 grit (which takes forever to remove the scallops), then 120 grit (longer than with my old planer), before progressing normally. My old straight-knife Ridgid needed far less sanding overall. From my research, this scalloping seems pretty normal with standard helical heads. I've heard one temporary workaround is to run boards through 2-3 extra passes at the final thickness setting, offsetting or skewing the board slightly each time to better overlap the cutter paths and reduce the scalloping (making sanding easier). I plan to try that soon. I was saving for Grizzly helical-head jointer and planer upgrades, but now I'm worried about the same increased sanding time. A few questions: Is noticeable scalloping typical with most helical-head planers, including Grizzly and Oliver models? I've read that the Silent-Power spiral cutterblock on the Hammer A3 series produces a much smoother surface with minimal ripple or scalloping, requiring far less sanding than standard helical heads. Is that your experience? I'm now leaning toward a Hammer A3-31 combo machine down the road. I wanted separate jointer and planer for better workflow and time savings, but I can't deal with doubling my sanding time. For those with 12" combo machines like the A3-31, do you ever regret not going for a 16" model (e.g., A3-41) for the extra width capacity? Thanks for any insights. You guys are my go-to for real-world tool advice! Jeffery Hiughes Huy's Questions: Gentlemen, First let me say how much I appreciate your podcast for it's practical woodworking…
Not rated yetRadial Arm Saw?, Making Drawers, Ignoring Wood Movement and MORE!!!
· 59 min
This Episodes Questions: Brians Questions: Since my work typically uses traditional joinery, I cut a lot of tenons. I’ve tried all kinds of methods, but I am really looking for that one method that works for all size boards (cutting bedrail tenons on the table saw isn’t going to happen) and is quick to setup – something that corresponds to the ease and simplicity of cutting mortises using my floor standing mortiser: using your layout lines on the workpiece, you walk up to the machine and start cutting. Easy. For that reason, I really gravitate to the idea of using a radial arm saw with a dado stack for tenons. Norm makes it look so simple: with layout lines already on the board, simply set it against the fence and set your depth of cut, and zip zip, flip, zip, and done (insert Guy’s sound effects for simple operations here). No clamps (unless it’s a small piece), no moving long unwieldy parts across a table, no complicated jigs. And best of all, you see the layout line while you make the cut – it’s not upside down as in a table saw or router table. It looks so simple, and easily a one-size fits all if you have the floorspace for a dedicated machine. But I know radial arm saws have fallen out of favor. I hear about the danger of the saw “walking” toward the operator (can’t you just stand to the side? It can only go so far, right?), and perhaps even more vexing, they are really only available used – and I don’t have time to tinker with vintage machines, as fun as that’d be in retirement one day. I’ve heard that the ubiquitous Craftsman machines on FB Marketplace and Craigslist have a lot of deflection and the bearings and tracks the saw rides in usually didn’t wear well with age, and that the real old DeWalt’s are the best. But again, I’m hesitant to buy something that old without having the time or knowledge to refurbish it. But maybe a week unpaid to refurbish one is worth the long-term labor savings I’d get? An alternative I’ve imagined is a router fixture (possibly even as a stand-alone table), where the router rides along a fixed fence and atop a flat reference surface, and where the workpiece is placed under that surface. Using the same router, bit and fence setup every time, I’d have reference marks on the fixture that help align the workpiece’s layout marks for consistent results. I’d walk up, insert the workpiece, align it and clamp it, set my router depth and route the shoulder of one face and then the edge facing me (yes, the router has to be held horizontal for this edge), and then route the additional meat left at the end of the tenon (if any) - then pull the piece out, flip it, align it, readjust depth if needed and route the other face and edge. The idea is to mimic the action and simplicity of the radial arm saw as close as possible, where the cutting tool is what moves rather than the workpiece, and the workpiece is quickly and easily aligned using its layout marks without complicated one-off jigs. My questions: Is using a radial arm saw for this task as wonderful as it looks? Is it worth the time likely needed to get one reliably working? Given the safety concerns I hear, as well as the commitment required of an old machine, which of the two alternatives above would you go with? Again, with the amount of tenons but of varying kind I do, I want something easy and simple and consistent from project to project – just walk up to the machine and, referencing layout marks on the piece, start cutting. Thanks! Michael Do you guys use anything in your shop that is not intended or marketed for wood workers? Right now my favorite is a fabric cutting mat, i used it once to measure the angle and length of a step stool and it has lived on my MFT ever since, it covers the holes nicely and it’s pretty satisfying bringing small pieces of wood to the mat to confirm measurements. Thanks you for a great show, Heywood Guys Questions: I have been driving more than usual for work and find myself listening to several…
Not rated yetExploding Furniture, Varnish Seepage, Dring Fresh Cut Lumber and MORE!!!
· 1 hr 0 min
This Episodes Questions: Brians Questions: Have been listening to your podcast for awhile now and the more I listen to more questions come to mind. Here is my current one for a walnut waterfall bench I’m working on. The dimensions are approx 58”L x 18”W x 16”D. How should I join a shelf to this bench where the grain flows continuously from the legs up through the bench top? The shelf will also be a glued up panel with the grain running the same direction as the bench top. If I attach the shelf to the inside faces of the legs using a mortise and tenon joint, do I need to account for wood movement? The legs, benchtop, and shelf are all 1.75” thick. I would assume that given they’re all the same thickness and technically the wood grain is in the same direction as the legs, just perpendicular, it would expand and contract together, and I could just glue the tenon. That said I don’t want to guess and hearing Guy talk about furniture exploding has me concerned. If wood movement is a concern then what’s the correct way to account for this movement? Should it be treated like a breadboard end with dowels through the tenons, installed through the bottom of the legs (the shelf sits 2 inches off the ground)? Or would it be better, and stronger, to use floating tenons/Dominos for this joint instead and just not glue the outside dominos and cut them loose to account for the expansion and contraction while gluing the center domino(s)? Thanks, Chayse Bell Thanks for the great podcast, I discovered your channel about a month ago and now listen all the time traveling to and from work. I've been woodworking a little over a year now and currently working on a dining table made from ash and have picked up all sorts of pearls that have helped with the glue up, apron design, finishing, etc., so thank you for all that. This question is directed to Brian, as he has mentioned that his shop is in his basement. I currently work out of my two car garage that I share with my wife's car. We just built the house in 2024 and I'm kicking myself that I didn't insulate the garage. These cold Northern Indiana days are making working in the garage pretty uncomfortable. I know I could just insulate it, but HVAC isn't attached to the garage either so to make it truly comfortable would be a big job/cost. So, Brian, can you share a little more about the layout/design of your basement shop? E.g. was it a room that existed that you converted into the shop or you framed the room specifically for a shop? How do you take extra precautions to make sure your family isn't affected by dust, as this is my primary concern. Obviously, I know of dust collection and dust filters, but it still concerns me to think I'd be working in the basement. Do you have anything you wish you did differently? We have an unfinished basement that is very open, so the sky would be the limit for me in the future before we finish it. Thanks, Evan Guys Questions: Somewhat recently I made a gift for my wife using White oak. I had predetermined that for a finishing schedule I wanted to first apply Danish oil, then seal it with shellac, and minwax performance series varnish for a top coat. I ran into an issue when I began to finish the piece. Not knowing a thing about wood porosity, I liberally applied watco Danish oil, and as a result I had a big problem with seepage. Now, my research had cautioned me that I would need to keep checking on the piece periodically for the next several hours after application to wipe up any seepage that came up. Even so, you this went on for so long that it became an issue. Two full days after application I was still wiping up seepage. I would wipe the piece down before bed at night, and when I'd check it in the morning there would be spots on the surface that took a considerable amount of effort to buff out. I couldn't keep up with it, and after a few days the surface was covered in spots, which meant that I had to start over. As I mentioned previously, I could…
Not rated yetTemp Vs. Humidity?, Planed or Sanded Surface?, Removing Rust and MORE!!!
· 47 min
This Episodes Questions: Brians Questions: Just a question to ponder about the future of our favorite material. As old buildings get torn down there seems to a great supply of reclaimed lumber for our current generation. But as we know this is a finite resource. So with that said will the next generation be turning to our generation’s slab furniture for their reclaimed lumber? Doug Hey! Sorry if this has already been addressed in a previous episode. I’m in upstate NY, and I have a full wood shop detached from my house. The woodshop is insulated, but the temperature changes outside are pretty much the max, 100 degrees in the summer, and it will live at 20 degrees in the winter. In the winter, should I keep materials I’m working on in my house, bring them out to the shop when I’m cutting, and then bring them back in? It seems excessive, but it's really huge temperature changes. I’m mostly dealing with walnut. Is the temperature the bigger issue, or is it really humidity? I could maybe install a heat pump, just yah know it's a lot of energy. If I went that route, do you have a recommendation for a temp I should keep materials at? Thanks again for making such a great show -Mohamed Guys Questions: Hello and thank you for the wonderful podcast. I was hoping for some insights on builds for high moisture environments. My fiancé and I just moved into our first house and need to update the bathroom vanity. Rather than spend hundreds of dollars on a a shoddy big-box-store model, I would like to take a crack at building one myself. I have enough experience with woodworking and building cabinets that I feel confident with the actual construction, but am concerned about the high moisture environment. I plan on making a carcass out of prefinished plywood with face frames and drawer fronts out of a yet-to-be-determined species (likely red oak). What advice and considerations do you all have for these high moisture environments? Do I need to use special finishes or some sort of sealant for the hardwood components? Do I need to worry about sealing or finishing the edges of the plywood even though the faces are prefinished? Do I need any special considerations for moisture or even mold build up between the face frame and plywood carcass? Any and all advice on this is greatly appreciated Thanks as always! Andrew Hey Guys, I love your show. Hearing 3 sets of opinions with different levels of experience really helps me learn. I've heard so many different approaches to sanding that I'm coming to the experts for guidance. To what grit do you sand to for Oak, Walnut, Maple, and cherry. Do you think a planned or card scraped surface is better than a sanded surface? Does it take the finish just as well? Thanks for all you do! Ezra Huys Questions: Another question... I recently had a small tornado that took the roof off of my shop. As a result, all of my tools got wet and the power tools - table saw, jointer, band saw, drill press etc - all got wet and rusted. They've been in storage since March of this year. I have new shop being built and hope to have it done by the end of this month. What suggestions do y'all have in terms of getting the rust off of the tools and checking for any other possible water damage? Thanks. Ron Brewer I’m making a walnut bench that I want to route headboard sides (legs) on and I’m not sure how to go about it. I’m not sure if a straight edge/track with a router and at pointed round over bit would be the best route or if I should do it on the router table. I plan on using a 3/8” or 1/2” radius point cutting round over bit for the beading. The end two end panels are 16”x18” and 1.5” thick. I have a festool 1400 router and an Incra router table as possible options. Also, once I get these panels made what’s the best way to sand the beads since they come down to a tight point in the middle. Sanding seems like it would be a huge pain and not sure if the router bit would leave a good enough finish to…
Not rated yetMaking XMas Gifts, Dye in Shellac?, Mortising Machine? and MORE!!!
· 55 min
This Episodes Questions: Brians Questions: Hey all, great podcast, thank you for doing what you do. What are some favorite Christmas gifts to make with scrap wood? Specific context for me: been woodworking for a while, hobbyist, been giving gifts to people for years and now I've lost track of who has gotten what. Just trying to get some ideas for this year. Time is easier to give to a project than money. I also like the lathe for scrap projects. Have found a good glue up can make a good looking bowl. Follow up/more specific questions: What are some favorite scrap wood projects that are not kits from Rockler (or similar companies)? Other than a bowl, what are some other gifts that can come off the lathe? What are some non kitchen items to make from scrap wood? (I believe I've given too many cutting boards, charcuterie boards, cooking utensils over the years). Jim Hello friends, I haven't submitted a question in a hot minute, as the kids say, but I finally have a good one for you and it's regarding something I'm truly stumped about. After hitting you guys with question after question about, "How do I do _______ without a jointer or planer?" I finally got myself a thickness planer. It's louder than all hell, and it's nothing fancy, but I'm glad I have it. There's only one issue that I'm having with it, and I can't figure out what's causing it. When I'm getting ready to Mill down some stock, I first set the height of the planer blades so they aren't taking off any material at the start. The depth of cut indicator is at "0". I'll even send the board through with the blades at this height sometimes just to make sure the gauge is accurate. I then lower the blades by 1/64", aka a quarter turn of the handle. I send the piece of stock through, it takes off some material, whatever. So far, so good. Here's what's throwing me off: after I've fed that board through the planer, I can feed that same board right back through, with the blades still set at the same height, and the planer will take off about the same amount of material, from the sound of it. This doesn't only happen on a second pass, either. I can feed the same board through the planer six, seven, or eight times, without adjusting the cutting depth, and the planer continues to remove material at each pass. Unless I'm missing something about how planers work, I would think that the material should have been planed down to thickness on the first pass. I can't figure out why it continues to remove material after multiple passes when I haven't changed the settings. This happens to me every time I use my planer. Not sure if this is relevant but I have a Ridgid #R4331 planer. I also attached a link to a very loud video demonstrating this phenomenon. Thank you in advance for your help and expertise, and thank you for continuing to take the time to put out this phenomenal woodworking podcast. I hope your projects are doing well, and I hope you're doing even better. Sincerely, Zachary T Owens Guys Questions: Hello, Thank you for the great podcast and for answering my questions. I have a question on using Transtint dye. I heard Guy and Huy mention they use it. Not sure about Brian. Anyway, I screwed up 2 projects when trying to apply it. In both cases I mixed it into Zinser Sealcoat shellac. Firs time applied with foam brush on elm. The second time wiped on on maple plywood. In both cases, the color was very inconsistent. I ended up throwing away the plywood and sanding the elm back to bare wood. My question is, is it ok to add Transtint dye to shellac? If so, what could be my problem? More importantly, can you tell me the process you follow to apply Transtint dye? The dye I was using is Transtint Dark Walnut. Max I have owned my Sawstop cabinet saw for nearly a year now and I have consistently been impressed with the quality of the machine. One thing that has bugged me since I got the saw is the occasional binding I get when I do a rip cut especially. I have…
Not rated yetOOOPS!
· 19 sec
Due to some tech difficulties, we won't be uploading an episode this week. See you next time!
Not rated yetBlade Height, Veneer Thickness, Open Grain Lumber and MORE!!!
· 59 min
This Episodes Questions: Brians Questions: Love the podcast fellas! I have a simple question: When I use my table saw, I usually just check if the blade is "high enough" i.e. any height higher than the wood piece. Is there an ideal blade height for a given wood thickness? Thanks! Matt What is the most difficult project you've ever done? Brian Guys Questions: I’m wondering how thick is too thick to veneer onto a plywood box. I’ll be making a treasure chest for my daughter’s wedding (for cards and such) and lining it in leather. I have some wood I’d like to use for the outside as “veneer”, but it is a 3/8” thick. The species is morado, and they were a “special buy” thing at a Woodcraft I got a while ago. Basically, I have them and I’d like to use them if possible rather than buying something else. My bandsaw isn’t always the most reliable, so while I would feel comfortable splitting them and then planing them flat again, that might be as thin as I’m able to do. I’m guessing 1/8” thick once all the processing is done. Is that too thick to use as veneer? Is there a glue that’s better for a thicker veneer than a thin one? Thanks, Peter I recently bought a small bandsaw mill (Woodmizer LX30) and am becoming an amateur sawyer, exclusively to supply lumber for my own projects. 2 questions, here's the first: 1. In what use cases, if any, would you use air-dried lumber for your projects, assuming it is stickered properly, outside, with a rain cover on the top, for a year per inch of thickness? I was told by a friend who operates a kiln that air-drying in southern Indiana will never get the moisture content much below 13-15%, it will dry unevenly throughout the board, and it won't kill powder post beetles and other insects. His conclusion is that for any indoor woodwork projects, I should only use kiln-dried lumber. Do you agree? Why or why not? Fortunately, he's well-respected, trustworthy, and at $.35/bd-ft dried, affordable. But I can air-dry for free, so I'd be curious to know when, if ever, that may be workable. Kyle Huy's Questions: I have another good fundamentals of woodworking type question for you. Could you explain the differences between grain density and porosity? For a while I thought I knew what at least one of these meant. That was until I heard Guy describe oak as a tight-grained, open pore species. That whole description goes more or less right over my head. I'd really appreciate it if you guys could explain what grain density and wood porosity look like visually, as well as what effects these attributes have on working with a particular species, finishing it, etc. Thanks for all of your time and for sharing your expertise with all of us. The Fridays when you guys have new episodes are my favorite days of the week. Zach Hello Friends, I have a woodshop at my house in the PNW. I’m somewhere between a beginner and not a beginner. If you want to answer this question on your fantastic podcast, you can of course skip the preamble. I offer it here so you can understand the context and environment in which my question lives. Because we are friends, I care what you think, so I hope you don’t arrive at the conclusion that I’m impractical. I’ve tried to create a shop environment that incorporates a whimsical and creative aesthetic because that is how I aspire to be in this space. I built an entry door and carriage doors for my 500sq foot detached woodshop. Doors guts are constructed from poplar frames, 1.5” ridged insulation in the voids, MDO skin on the exterior side trimmed in the craftsman style with ¾ cedar. The interior side of the doors are skinned in plywood and laminated with orange counter top material. The orange is the same color as those orange shirts people who work hard wear. I like to wear these shirts to give my wife the impression that I too am working and not just fudging around. I wanted my workshop to feel likewise. Door window sills and trim are walnut. On the entry door, I’ve installed a…
Not rated yetProject Fatigue, Dowels VS. Dominoes, Sewing Machine? and MORE!!!
· 45 min
This Episodes Questions: Brians Questions: I recently bought a good amount of S3S ambrosia Maple from Rockler. I bought it at a crazy discount. The first time I picked some up they were selling it for $3 per board foot, and when I came in a few weeks later it had dropped to $1 per board foot. I asked multiple employees why the price was so low. They all said that they simply just didn't have room for the material. Looking around this seemed to be the case. I have been storing the wood in the loft of my shed/shop for several weeks now, which is cool and dry this time of year. I finally decided to begin a project using some of this material, but to my dismay I have discovered that most of the boards have a twist in them. I've been able to minimize this problem by strategically cutting the boards into smaller pieces, but when I put them in my crosscut sled, I've noticed that a few of the boards aren't even flat on the edge that is supposed to be jointed. Is this something I should expect after moving lumber that had been stored somewhere with moderate temperature and humidity to a cooler and dryer location? Or is it possible the store was selling this wood for so cheap because people had had issues with this material already? I try not to be overly fussy, especially when I've I've gotten a good deal on something, but this is one of the first times that I've purchased a significant amount of hardwood from a higher quality store and what I'm looking at is about the same quality I'd expect after picking out hardwood boards at random from a big box store. Lastly, considering that I don't have a joiner or a planer, is there any way for me to try to correct the twist in these boards? For now I just have worst of the boards clamped down to a flat surface. Thanks in advance for your time and your feedback. Sincerely, Zach Owens Hi guys, I have a question about how long does it takes, when working on a project, before "project fatigue" sets in? I woodwork for at least an hour or more everyday (much more on the weekends) and I have built book cases, a fancy cat tree, a hallway table, small boxes, solid oak doors, and shop furniture in the past year. Sometimes I get to the point where I just want to finish up the current project so I can start something new. It seems to happen around the 4 to 6 week mark. Do you ever get project fatigue? Just curious if I'm not alone. Also, thank you to Guy for discussing hide glue and shellac in previous podcasts. I'm now making my own glue and dissolving my own shellac flakes. I like the traditional aspect and easy of use. Cheers Chris from North Mankato, MN Guys Questions: I would like to build my kids a set of montessori style bookshelves out of solid maple, and I can see myself making more of these in the future for others. So, I am trying to figure out how to make the joinery fast, accurate and repeatable. Also, I would like to avoid using screws and I do not own a domino, so I think that probably makes dowels the best option? How would you make the 2 sides to this bookshelf? My thoughts are to make a template for the sides so I can route the shape. I am struggling with the dowels... Due to wood movement in the vertical shelf pieces, I was thinking about using 2 dowels, where one will be fixed and the other will have a slot cut into the side panel. See attached photos. Each horizontal shelf piece will be dadoed to the vertical shelf piece and the 4 shelves will not be connected to each other to help account for wood movement. If I use an mdf template for the sides and also put the dowel holes and slots in it, how would you cut the holes and slots? Router, router with bearing, drill press, hand drill? Is there a better way that could be easier or faster than I am missing? Thank you for all you help! Jeff Hello all! Thank you for a great show! About a year ago I built a cabinet with a cherry top. It was finished with a single coat Zinser Bulls Eye Seal Coat, followed by 3 coats of Poly.…
Not rated yetRounded Boxes,Grain Selection, Belt Sanders and MORE!!!
· 55 min
This Episodes Questions: Brians Questions: I’ve been making music boxes and trying to replicate the traditional style (see attached photos). I’m struggling to get the curved edge just right. I’ve tried using a planer, but I keep messing up and have ended up wasting a lot of boards. Router round-overs almost work, but still need planed or sanded after routing to get the shape just right, and also they’re pretty dangerous given the small and awkward size of the pieces—I’m working with ¾-inch thick wood that’s 2.5 inches high for the box sides. I'd like a repeatable process that provides consistent shapes, but can't seem to find a way to achieve it. Advice? Trish I’ve heard a few of your podcasts where you speak about making boxes and using a router to make the miter. I’m assuming you’re using a bit with a 45° angle. What I don’t understand is, how do you get the sides to be the exact same length while using your router table. It would seem to me that having the top of the angle (the point of the angle) against the fence would be almost impossible to get perfectly sized sides. Can you please describe what I am missing here, since a perfect 45° angle using a route a bit seems incredibly simple. Mike G. Guys Questions: I have always tried to select straight grain for legs, aprons, stretchers and the frame of a frame and panel. I am now thinking this may be too much straight grain in a piece of furniture. When are the times that you would not do this and would instead use a more interesting grain pattern in these pieces. Does the wood species affect your choice? For example, it seems like the current trend with walnut is not worrying about getting any straight grain in the pieces at all. Thanks for all your help. Jeff Hi from Melbourne Australia. I’ve been listening for years, and I like how y’all do things! Thanks for making the best woodworking pod. Like everyone, I have a small shop, that I fit a lot into. Without listing every item… I’ve got stationary machines covered with a euro style slider (Hammer K3), a 14” bandsaw (N4400) and a combo planer/thicknesser (A3-31). Those 3 cover my needs really well, and I’ve learned to work within the capacity of my tools and space. It’s the secondary/benchtop machines that are causing trouble. Mitre saw was first to go. Don’t miss it, don’t need it. I’m looking at sanders next. The disc sander stays, couldn’t live without it. But the 1632 drum sander and the oscillating bobbin sander are both rarely used and take up space I want back. Could you life without them? If not, what’s the essential job they do for you? I’m usually making furniture sized objects. With the finish I get off the helical thicknesser, I find that hand planes/scrapers, ROS, and hand sanding is usually all I need. For bigger flat things, I’m gonna pay a pro shop to put it thru a wide belt sander anyway. Johnny Huys Questions: I was trained on a belt sander, and as Guy has mentioned, there is a learning curve. I’m now very proficient with one and it is a central part of my stock prep: from the planer, I belt sand a rough-sized board with 80 grit, wet it down and let it dry to raise any remaining compression marks from the planer, and then belt sand with 120. I then cut the board to final dimension, random orbital sand with 120, cut the joinery, and then random orbital sand the fitted piece to 180 before final assembly. The process leaves flawless surfaces every time. For panel glue-ups and tabletops, I glue up from the planer using cauls and then make sure the 80 grit belt sanding that follows evens out any discrepancies in height along the joints (hopefully they are minimal). I have zero experience with a drum sander, but I would consider getting one if it could replace some of the above belt sanding, as the belt sander is no light weight hand tool, and it’s a killer on my back when I have to sand a full width dining table. I would likely get the PM2244, as I have heard it is the easiest to adjust. You all…
Not rated yetBox Glue-Ups, New Shop Build, Which Tablesaw and MORE!!!
· 56 min
This Episodes Questions: Brians Questions: Thank you for your awesome podcast! I recently started listening and am still working through older podcasts while staying up on your bi-weekly episodes. I would describe myself as a longtime hobbyist who has built some basic furniture but who still has much to learn. My current project is setting up my workshop in one car space of a 3 car garage after having moved back to California from Colorado. We’ve been back for over 3 years, but holding down a demanding full-time job and getting 2 kids through grad school has kept my wife and I pretty busy and has left little time for hobbies. Since I don’t have any specific projects in the works besides setting up my shop, my question is a little broader. Curious to learn more about your thoughts on hand planes. How much of your woodworking repertoire includes the use of hand planes, what types of hand planes do you use the most and for what types of jobs do you use them? Or, do you completely omit hand planes from your woodworking arsenal? Thanks again for the great podcast. Best regards, Darryl Noda (Wildfield Woodshop) Thanks once again for putting out the most helpful woodworking podcast I listen to! I'm making a lot of small boxes, many of which I make as one piece and then cut the lid off with a table saw or bandsaw. How do you deal with glue squeeze-out on the interior corners of such boxes, when you can't access it until after you cut off the lid? My current methods are to pre-finish the interior sides of the box, so the squeeze out doesn't affect the finish, or else to use painter's tape at the corners. The pre-finishing works decently but requires a lot of forethought and has some limitations; the painter's tape is a pain and doesn't work all that well. Another method I've tried is not caring about the squeeze-out and installing box inserts to cover it up. Do you all have a preferred method for dealing with gluing up closed boxes? Thanks again in advance for your good advice. Kyle can you live without a pedestal drill press? It’s handy, with relatively small footprint. But it seems like I use it exclusively perpendicular holes with Brad point or forstner bits., I could probably replace it with a drill guide like this UJK one. https://www.axminstertools.com/global/ujk-technology-drill-guide-with-10mm-chuck-106072 Thanks again for the pod, and for considering my question! Johnny Huy's Questions: My wife and I were on vacation earlier this summer driving from Iowa to Florida and I was board listening to the radio and she suggested I look for a podcast on woodworking. Boy was she sorry she suggested that! I found your podcast and what an informative and fun podcast! I’ve listen to a lot of them but have not got to them all. I am getting back to woodworking and have started a side gig and have completed a few projects for a few people and have several more to do. I’m doing tables, shelves, cabinets, bookshelves, benches, and some other smaller things. I have a pretty good shop with a pretty good tool selection. Just purchased a Sawstop PCS 175, 36” fence and I can’t believe the quality from my old Delta contractor saw. It will certainly help me up my game on a lot of things. I have a couple of questions that I hope you can help. Some of these projects are stained and others are painted. Up to this point I have just used brushes and rollers to paint and use mostly Sherwin Williams paint. The project turns out ok and my clients are satisfied but I’m ready to kick it up a notch by spraying. I’ve used a sprayer called a Criiter and while it works ok it very difficult to use on anything of size. I’m lo I recently had the misfortune of losing my shop to a windstorm/tornado. So, I now 'get' to rebuild. I plan on having a footprint of about 30 x 40 with a 10' rollup door and one man door. I have several questions so appreciate that you may not be able to answer them all. 1. What would you suggest for the interion walls? OSB,…
Not rated yetUltra Durable Finish, 120v or 240v?, Taper Jig Woes and MORE!!!
· 55 min
This Episodes Questions: Brians Questions: Hello gentleman, thank you again for one of the best woodworking podcasts available. I recently had the opportunity to travel to Lebanon IN for a few days of training at a tool manufacturer. I won't mention the company, but I got to use a Domino and a Rotex sander for the first time..., but I digress. While I was in the airport waiting for my flight home and enjoying a breakfast sandwich, I looked down at the table and noticed the "purposeful-design" logo branded on the top. This experience gave me two questions. One, what finish did Guy and Brian use on these tables to survive the abuse of so many travelers per day through an airport? Two, during the training we sanded a piece of cherry to 1500 grit, giving a very high sheen to the bare wood. What type of technique or finish would you use on something like that? Thank you for the great podcast, and I'm sorry I didn't have time to say hi while I was in Indianapolis. I waved from the plane, but you probably didn't notice. Josh Hello fellow wood-nerds. I would like some advice on finishing. I’ve been doing a bathroom remodel. Which means I’ve spent a very long time doing non-woodworking work and learning new skills and desperately missing my shop time. I’m near the end finally and actually get to do some woodwork to wrap it up. My new floor doesn’t quite line up with the floor in the next room and the transition pieces available don’t quite suit. So I’m making one custom out of walnut. My question is: what would be a good finish? I don’t want it glossy or “plasticy” looking. But of course it will be stepped on and exposed to humidity from the shower so it does need to be durable. Thanks in advance Jason Guys Questions: This one may for Guy specifically but I'm interested in getting a 3D printer and would like your opinion on what I might want to look at. I have a total budget of around $1000 and want something that is very turnkey; I don't have a ton of time to learn how to use the machine and would like that will work for me out of the box. I'm looking at the Bambu Labs p1S; would this be a good starter machine? Thanks again for the great Podcast! Ron Brewer Hi Guys, I am hoping to eventually upgrade my table saw from a jobsite saw. I have heard a little bit of discussion about the advantages of an induction motor over a universal motor but I was wondering if you could provide some insight about voltage for a table saw. Obviously higher power is available with table saws that operate on higher voltages but as a hobbyist I am wondering how much power I actually need. I do make some cabinets and furniture as well as smaller projects. So here is an assortment of questions that are perhaps intertwined: Is the increase in power with a 240V saw worth it? I would also have to get new electrical added to my garage. Is the type of motor related to the voltage? In your opinion are table saws that can be rewired from 120 to 240V a viable option? Would the power actually change with the rewiring? Are there any other considerations that I am not thinking of? Thank you all for your insight. Brad Huys Questions: If you're installing a herringbone floor, do you need to think about chatoyance, in addition to colour and grain pattern, when you're laying out the pieces? Do you want all of the pieces to be oriented to have similar chatoyance? Lauris Hello Guys, I listen to your podcast while driving to and from work. I really appreciate that you stay on track and offer several opinions regarding woodworking without the cackling and inside jokes, poor microphone control etc that other woodworking podcasts seem to have. I build a lot of Shaker style furniture with tapered legs and built my own taper jig, a sled which clamps the leg at the desired angle with the widest part of the cutoff leading into the blade. This has worked very well except that occasionally, the wedge that is cutoff tips into the crack between the saw blade and the insert,…
Not rated yetCleaning Furniture, Moldy Shellac?, Band Saw Belt and MORE!!!
· 47 min
This Episodes Questions: Brians Questions Hey guys, appreciate you answering several of my questions in the past, so I thought of a few more. Feel free to separate as they are not related: 1: What do you do, if anything, to maintain furniture you have built? What would you tell a client if they were to ask you. I have always heard Murphy’s oil is a good restorative, but when I looked at a bottle at the store I discovered it’s just mineral oil. I would never recommend that. Or should I? Lemon Pledge Furniture Polish. Joking, but seriously, what is a good answer? Paste wax? Or just wipe the dust off and let it be? Peter Downing I’m building a dresser and have built the carcass out of cherry plywood. I’ve glued up a panel out of solid cherry that I want to use as the top. I want to attach the solid panel to the top of the carcass. Would you recommend using screws from the inside/underside of the plywood top and allowing for wood movement or is it ok to glue the solid wood top to the plywood carcass top? Eric Guys Questions Domino vs beadlock set up from rockler? Same principle...and , in my experience...same outcome. Thoughts? Crafted Carpentry Tampa When I wanted to learn how to apply shellac, I did a search and found a Youtube video of Guy from the late 70's when Youtube first came out demonstrating his technique involving a balled up rag and a mason jar with a lid to keep it in so it doesn't dry out between coats. That video is fantastic and I learned a lot than just the rag and jar business. Inevitably, when I'm done shellacking for the day, I leave the rag Guy's Jar. Because you never really know when you are done applying shellac to something until you arrive at that destination, I end up leaving that rag in the jar for a few weeks. It's amazing how well it keeps even weeks later. HOWEVER, on more than one occasion, when I pull Guy's Rag from the jar, it is moldy. This surprised me the first time because I assumed that the amount of alcohol in the shellac would prevent anything from growing. Does this happen to y'all or is indicative of something amiss. I just toss it and get a new rag. Additional data points: Shallac is < 2 months old, made from flakes, sourced from Oregon's shellacshack.com I'm using Platina colored shellac usually I'm using "Finishers Edge Shellac Reducer" instead of denatured alcohol because is way more expensive so it must be better right? Jar is a resealable mason jar with a rubber gasket Cloth is from the "bag of t shirts" you can buy at your local woodworking store Shellac still has a strong odor of fresh shellac I reuse the same jar to store my rag Because I'm not a proctologist, there is a chance I've misdiagnosed the mold so I attached an image of the rag. Robert Huys Questions Gents, there is a question here, but I wanted to share some info with you first. In a recent episode there was a bit of a discussion of using Tung oil and how to thin it, etc. I recently made a walnut desk inspired by the Nakashima style. I've had the good fortune to get my eyes and hands on some of his pieces for inspiration - they are amazing. Anyway, on the Nakashima website they discuss the care of their furniture, mentioning how they use Southerland Welles Tung Oil Wiping Varnish. https://sutherlandwelles.com/product-category/wipingvarnish/ It is really easy to apply and looks fantastic, especially on walnut. I used the Sealer and High Lustre Polymerized Tung Oil finishes. I highly recommend them. (this is not a paid ad!) Finally, here is my question: Have you ever taken a technique, tool, or finish that is used in another craft for your use in furniture making? An example might be Tru Oil used on gunstocks as a furniture finish? Or a technique used by luthiers that helped you in furniture making? Thanks again for a great podcast! Regards, David V. Hi guy I have a question or re3ally looking for advice. I noticed the tension on the v-belt of my delat 14 inch band saw was lose. It looked…
Not rated yetStretching Lumber, Raised Panel Doors, Combo Machine? And MORE!!!
· 57 min
This Episodes Questions: Brians Questions: Howdy fellas, Love the podcast! I'm in the process of building a bench and misjudged how much wood I could get out of a board. The plans call for two stretchers of 3/4 maple about 65" long and 4.5" wide. After squaring and thicknessing, I'm down to 0.75-by-65-by-4.25 which is 1/4" too narrow. I initially thought I'd start over with a new board, but have decided to forge ahead with the slightly narrower stretchers since it won't impact the joiner, should still be plenty strong and will probably be imperceptible. In this example or others from your experience, how big of a boo-boo do you allow in your projects? Sorry if you've covered this before, I'm still catching up. Thanks, Bryan In a previous podcast, Brian mentioned he had used raking light after sanding and was impressed by how clearly sanding marks were visible. I have tried to deliberately use raking light to identify sanding issues. You can lift a small item at a angle towards an overhead light and sight along the surface which works but if it is larger surface this isn't practical. I have taken an led trouble light and held it at an angle close to surface but rarely see the sanding marks stand out. At some point in the afternoon sunlight hits the top of a project and marks are clearly visible . Any suggestions on using raking lighting on larger surfaces? Thanks for the great program, look forward to each new podcast. Dave at Xcuse4tools Custom Woodwork Guys Questions: Appreciate you all and look forward to your podcast. I was making raised panel doors for the cabinets in my shop. The panels are cut on the tablesaw with a tall fence jig and the blade tilted. This works well but leaves a few saw marks on the beveled portion of the panel which need to be cleaned up. The best way i know to sand this area is to wrap sandpaper around a small flat piece of plywood and manually sand it. This is time consuming and you are sanding across grain on two of the four bevels. I was wondering if there are any powered options available. I still have a quarter sheet sander but you hit the outer edge of panel if you use this on the bevel. Have you used a mop or star sanding wheel? This appears to be good for contours. Hoping you might have some insights possibly with Huy's recent furniture restoration efforts. Thanks, Dave@Xcuse4tools Custom Woodwork Hi there, As always, love the podcast and all of the insights and expertise you share. I’m preparing to do a built-in cabinetry project for our entertainment center. The full set of cabinets will be be about 11 1/2 feet wide. I’m planning to do shaker style doors, but with a beaded pdf panel with vertical beads going across the full width of the panel. I know Guy is probably going to say, “I’d just buy the panels and be done with it”, but let’s say that I really wanted to make them myself. How would you recommend cutting all of those beads. I have a Powermatic PM2000 and a nice cast iron router table and handheld routers, but no CNC. I recently saw a video where someone made these kinds of panels with a “Magic Molder” on the table saw. Would love to hear if you have any other methods. Pete Huys Questions: I have been woodworking for 6 years and have learned allot from your podcast. I recently took a finishing class and learned about the different finishes. Mineral spirits is the recommended thinner for oil based finishes. Why does Guy recommend Naphtha. What is the difference between Naphtha and Mineral Spirits. What advantage is there in using Naphtha. Thank you for all the great information you bring to the community. John Gents - Apologies for the long story, but you asked for questions. At the peak of the COVID pandemic I found myself watching far too many YouTube channels and came upon makers using European combination machines. Call it boredom or simply a need for a good excuse to travel during a traffic density period we hope to never see again, I researched a variety of brands…
Not rated yetExcel For CAD?, Blade Wobble?, Pigmented Finish, and MORE!!!
· 54 min
This Episodes Questions Brians Questions Hi guys. I've listened to every episode of the podcast and some of them more than once. Really appreciate all of the insights you give. It makes my commute much more fun and I've learned a ton! This question is primarily for Brian. I've heard you all poke fun at him for using Excel to plan his projects on multiple occasions. I'm very curious to learn more about how he accomplishes this. I understand that he makes each cell square and draws, but maybe he could give us a little tutorial. What cell height and width does he use? What does each cell represent (an inch, six inches, a foot?). Any other of the steps you use would be super helpful. I'm planning on a built-in set of cabinets coming up and I thought I'd give your method a shot. Pete Hello Guys I am looking into getting a router table. Based on your experience which would be a better option. A full size stand alone router table or a router table insert for my table saw. I have plenty of space and I am looking to spend around $600 to $700. Is a router lift an important add on. Thanks for all the knowledge you all give and keep that PMA (positive mental attitude) going. Thanks Korey from Independence, KY Guys Questions Gentlemen I listen to every podcast and invariably learn something from your answers to the questions. Keep up the great work. I have a Canadian made 14 inch General thickness planer that is about 40 years old and it has been working well and reliably over the years. Lately I noticed that one edge of a full width (14 inch) board is about .7 mm (28/1000 inch)thicker when compared to the other. It may have always done this but I am edge jointing some wide boards into panels and the variation in thickness means I have to hand plane the joints. There is no way to adjust the base to make it parallel to the cutter head. I almost always use a sled so I could adjust it to offset the inequality. My question is am I being a bit too fussy with the small difference? Would you accept this level of planing inaccuracy when working in your own shop? Bob Vergette, Pender Island BC, Canada Here is my next question. I am making a shadowbox out of walnut. I want to put brass splines on the corners. I built a spline jig and I purchased a new CMT 201.024.10 Industrial Ripping Saw Blade, 10-Inch. x 24 Teeth FTG Grind with 5/8-Inch. Bore, PTFE Coating. This blade measures 1/8 with calipers across two of the carbide tips. However the cut comes in at 5/32. The brass I purchased is exactly 1/8” This leaves very small but noticeable gap. I've also tried with another blade and got the same results. What suggestions or tips you may have to get that saw kerf to 1/8 inch? I may next try a slightly larger thickness of brass and file/sand it down but that will be more work. I hate to say this but guys on Youtube make it look easy and have no gaps, but don't provide the tips and how they got such tight fits. Thanks in advance! Dudley @ Pappys Hangar Huys Questions Gents, what a great podcast! I love the format, the focus on answering questions, and the valuable information. I especially like hearing Guy's perspectives who's both a pro and a hobbyist. Thanks and keep it up. I've been woodworking as a hobbyist for about 50 years - yes I'm older than Guy but not dying anytime soon thanks to my Sawstop - but just now getting into spray finishing. I have heard Guy talk numerous times about using pigmented water based conversion varnish. I have an upcoming project involving kitchen cabinet door panels that need to be finished to match the existing which is conversion varnish tinted to match Benjamin Moore Linen White. Because I have also heard Guy saying he gets his finishes from Target Coatings, I contacted them but was told they do not tint their conversion varnish and I would need to tint it myself. Their suggestion though is to apply their pigmented water based lacquer for the color match, and then coat that with their polycarbonate…
Not rated yetBuying Lumber, Bench Dog Holes, Glue Shelf Life and MORE!!!
· 56 min
Brians Questions: Thanks for sharing your knowledge and opinions - and answering my previous questions. It's been a great help. My shop is in my single car garage, which I share with household storage. It has a very high ceiling. I recently got a good deal on a new Jet AFS-1000B Air Filtration System. (note: I do not have a dust collection system, as I try to do mostly hand tool work, but I do use power tools as needed. So there is plenty of dust). The question is: where to locate the device? The options are: 1. I have a shelf that is suspended from the ceiling and could test to see if it will support the Jet unit. 2. There is a metal storage cabinet that I can set it on, and attach to the wall (per Jet instructions). 3. Place it on the lower shelf of my Moravian style workbench. Attaching it directly to the ceiling is out, as it is too high, and I don't have ladders or scaffolding to get up there. The easiest is option 3 - on the lower shelf of the workbench. Will it be effective down there - about a foot off the ground? Or should I go for options 1 or 2? Thanks for any insight. David V. - Baltimore, MD Gentlemen, Thank you for taking the time out of your busy schedules to share your knowledge through the podcast. I’ve recently caught up on all the previous episodes and really look forward to the bi-weekly insights you provide. It’s been a tremendous help as I navigate the early stages of woodworking and material sourcing. I have a question regarding quality expectations when purchasing from regional hardwood suppliers. I’ve recently started buying from a distributor in the Texas/Oklahoma area that operates multiple warehouses. While I’m still relatively new to this type of procurement, I’ve noticed a gap between what I expected from a “select & better” grade product and what I actually received. My recent order was for cherry lumber—select & better, RW&L, averaging 6 inches wide, 9 feet long, and 15/16" thickness, graded 90/70+. The issue I encountered was significant end-checking and splitting—some boards had cracks extending 10 to 18 inches. Since the lumber (along with some maple and walnut) was bundled and strapped to a pallet, it wasn’t until I got home—over an hour away—that I realized the extent of the damage. I understand that some waste is always part of the equation, but I’m trying to get a sense of what’s considered “normal” for a premium grade. Should I have contacted the supplier once I noticed the issue? Or is it standard practice to inspect the order before it leaves the yard? I’d appreciate any guidance or rules of thumb you might recommend for handling situations like this. Thanks again for your time and for all the valuable information you share. It’s been a huge help. Best regards, Mark Guys Questions: I’m preparing to build a set of kitchen cupboards from white oak. The style will be Mission, with some Frank Lloyd Wright Prairies Style touches. I have several questions. I’m going to build some assembly tables. I don’t want hundreds of dog/hold-down holes in each, but I will probably drill a few. I’m wondering about 3/4” (the traditional North American standard) vs. 20 mm (a standard popularized by Festool, etc.). I know this isn’t a black and white choice, but could you share some thoughts on what one might consider before committing to one size vs. another. Darrin I frequently seem to struggle with keeping the countersink concentric concentric with the screw clearance hole. I have both the multi-flue countersink and the countersink with one diagonal hole but they both want to wander. I also have a tapered drill bit with set-screwed countersink. Maybe I should be trying harder to use that type. So my question is - do you have any suggestions for keeping the countersink centered on the clearance hole, and what is your preferred type of countersink. Steve Huys Questions: Hello guys, my name is Jim Rose. I live in north central Kansas and have a couple of completely different…
Not rated yet3D Printer in the Woodshop?, Shop Made Veneer, Sliding Tablesaw Extension and MORE!!!
· 53 min
This Episodes Questions: Brians Questions: What are the the most useful 3d prints for a woodworking shop. I often print out small pattern templates and fixtures for hole placement. Even storage solutions for various tools etc... what are your top suggestions? Josh Hi, let’s talk about working with laminated plywood. I just picked up about 25 sheets of 3/4”x 22”x6’ birch plywood that has Formica laminated on both sides from the free pile of a high volume cabinet shop. I want to encourage everyone to find local cabinet or mill work shops in your area and drive by them often! I do on my commute to and from work. What kind of design/construction considerations would you make when building cabinets with drawers for my garage using only this 3/4” plywood? It will be for my garage. I know it’s common to make drawers using thinner plywood but I’m not trying to spend money if I have to. how would you finish the edges? I’m going to make a blanket chest next, The laminate is a fancy textured walnut wood grain that actually looks pretty good. I currently don’t have a shop but have some hand tools and hand power tools like a router, circular saw with track, and a lot of imagination! With the help from your podcast I just recently purchased a biscuit jointer and a large (rather intimidating) 45 degree chamfer router bit. Haywood Guys Questions: Hi Guys, I’ve been listening to your podcast since the beginning and it’s by far the best. There’s not even a close second. My question is: I want to make shop sawn veneer. I have a band saw with 11” cut capacity, grizzly 8” jointer, a dewalt 735 thickness planner with a Byrd Shelix helical cutter head, but I don’t have a drum sander. I would like to end up with 1/16” cherry veneer that is 10” wide, but I’m not sure about the process to make it. Would the thickness planer be too aggressive to remove the bandsaw marks or would I need to purchase a drum sander? Also, after cutting a piece of veneer from the stock, do I need to reflatten the stock before cutting another piece of veneer. In general, I guess what I’m asking is given the set of tools above, how would you go about making veneer? Mike I am building a trestle table out of African Mahogany, more specifically Khaya. I am using 8/4 for the top and 12/4 for the legs. It is going to live on a jalousy window sun room that is not climate controlled in the state of Florida. What finishes do you guys recommend to use to help preventwood movement or warping over time, or is that just going to happen. David Huy's Questions: Hello Gents, This is a bit of a long winded question regarding aftermarket sliders for the table saw and how to best use them. I recently purchased an old Excalibur sliding table from my saw. This is an older model but from my understanding is almost identical to the current SawStop sliders, as SawStop took over the old Excalibur models (maybe this is incorrect or you have more insight?). I mounted the slider to the extension table on the left so I get the full size of the TS top and the slider fence is long enough to reach all the way to the blade. I figured that this way I get the best of both worlds, and I do have the space for it. My purpose for the slider was to help break down sheet goods, manage angled cuts on larger pieces, and to help cut miters on larger case panels. I've made a few cases in the past with mitered corners and running a long case panel on the TS to cut the miters is a bit of a pain. I was hoping that the slider would simplify that process as it would allow the long panel to move over the table smoothly while held square to the blade. Here is the kicker, the slider mounts on the left of the saw which is the direction that the blade tilts. In my mind, this creates a problem as I have to run the panel up-side-down, under the tilted blade, and the offcut would now be dropping on top of the blade where it will create a kickback situation. In general, I wouldn't run the piece "under" the blade…
Not rated yetFood Safe?, Wrangling Plywood, Exterior Doors and MORE!
· 54 min
Guys Questions Hey guys, I really love your show. My question is about food safe finishes. I do a lot of CNC carving and one of my favorite is deviled egg trays. The first couple I made for my wife I just finished with some butcher block oil, the composition of an egg Has something in it I think and it quickly turned the reliefs in the wood surface black. I talked to my sister-in-law who’s a chemical engineer and she told me that polyurethane once it’s cured would be fine for this. I have done a few with this and it seems to be holding up OK but I am curious what your guys thoughts are on the long-term effect of this. Most of my egg trays are made out of a butcher block style material that has lots of maple cherry ash a little bit of oak and various leftovers. Unfortunately, I can’t use walnut in my wood shop due to my wife’s tree nut allergy again guys. I really appreciate your podcast and look forward to listening to it. Albert Thanks for the great podcast, I learn something from every episode. I recently made a few band saw boxes for Christmas gifts. They are a good way to use up some offcut lumber and the family seems to appreciate something handmade. The 3 drawer box with a curved top and side (pictures attached) caused me a bit of trouble. Joni had preciously asked for a sideboard style cabinet to place between out living and dinning room areas. After 2-3 month we still hadn't found a design she liked....until she saw the curved band saw box. I quote "I love that design and want one like that only much bigger" My question is what suggestions do you have for making the curved top and sides, I am thinking the sides could be made using walnut plywood by cutting kerfs and bending the plywood over a frame but I am open to other ideas. The top has me stumped, I have made segmented arches for a table support but they were only 4" wide and I cut the arch on a band saw. That would not work for a wide dresser top. Approximate dimensions would be 30" -35" wide and 45- 55" tall and 20-22" deep Thanks in advance for you help DH I realize this isn’t a fine precision woodworking question, but I figure you guys have probably dealt with manhandling sheets of plywood. We have about 140 sheets of plywood that we need to put down on a floor. The median age of the guys doing this is somewhere between 65 and 70. Any suggestions for how to safely handle this many sheets of plywood to minimize strains and injuries ? Thanks, Mark Huys Questions Good Morning, I appreciate the podcast as I continue to learn its been a great resource, thank you! Quick background. I grew up watching PBS's Norm Abram and This Old House but never had much opportunity to learn wood working. As an adult I started learning both construction building and cabinet/furniture making helping others, reading and youtube etc. Starting in basement workshops with mostly benchtop tools. ~15 years into the journey I am starting to get a decent foundation. Recently I built a house with a planned garage workshop and have started outfitting it. Bones are there, lots of organization needed but I have now have 3hp grizzly table saw, bosch miter saw with large counter style station, 8" Grizzly jointer, 24" Grizzly Drum Sander, Grizzly Bandsaw and dust collector Planer still needs upgrading, have a Ridgid 13" but watching for a used 20" helical head. I have been busy chasing used deals! Also recently setup a 10'x10' popup tent with furnace filter setup tied into 12" exhaust fan as a spray booth, works great! Spraying with a Fuji mini mite 5 stage and PPS cup system. Space is 32'x32' when cars are out with 12' ceiling, in floor heat. Rural northern New York. Not a Rockler or similar store within a days drive but we have ample local sawmills to find solid wood if your willing to mill it and access to cabinet grade plywood delivered from suppliers. With this shop setup I am now building cabinets, furniture, trim, doors etc for our house. Starting in some areas I don't mind…
Not rated yetDrum Sander?, Blade Deflection, Shop Smike Detectors and MORE!
· 55 min
This Episodes Questions: Brians Questions When making trivets, how to cut the grooves - when I cut mine I hogged out half the thickness of the wood in one pass. That led to some pretty rough cuts and gouges (i.e. scrap). I assume the answer is a router table with a lift, but of course I don’t have one YET. :) Also, what finish to put on a trivet (which is used for hot pans)? - different finish than a cutting board? Tung oil? Danish oil? I assume ’not’ ArmRSeal. Mark I’m preparing to build a set of kitchen cupboards from white oak. The style will be Mission, with some Frank Lloyd Wright Prairies Style touches. I have several questions. I have a SuperMax style cantilever 25-50 drum sander. Do you think that this is a feasible tool to level out the boards to remove the planer snipe? …and avoid having to cut 3” of the end of each piece? Darrin Guys Questions: Been enjoying your podcast through several projects. My background is homebuilding, but through my sawmill hobby and unwillingness to pay for overpriced garbage…I have found myself learning about woodworking. My question is about making doors. I have made one door so far using only groove cuts into the stiles’s and gluing the tenons of the rails and panels into these cuts. I don’t have much faith in the longevity of this door, but it’s been a year now. What is the traditional methodology for attaching the individual parts of a simple 3 panel door Should I just buy a domino and get it done… Also per your latest podcast episode, what is the best way to midi gate the wood movement at the joint of the rails/ stiles. As these joints are not small nor parallel. Sorry for the low brow question. Appreciate the knowledge. Lucas Hello esteemed woodworking gentlemen! Thanks for the amazing podcast and the contribution to the woodworking community. I’m seeking some general advice and hope you can help. I was recently watched a YouTube video where someone stated that a track saw blade should always be buried for the straightest possible cut. That made me wonder if I can be causing unnecessary blade deflection on my jobsite table saw and Dewalt miter saw. I often struggle achieving perfect 90 on those machines when crosscutting. As a hobbyist with limited shop time, setting up machines is pain but I understand its necessity. Can you speak on this blade deflection and are there any go to tricks that you have for ensuring your machines are set up properly? Thanks for any help you can provide.-Jose Huys Questions: A while back my wife and I bought and moved into a house with no dishwasher, then later purchased one after realizing how much not having one sucked. We made the mistake of assuming that we would be fine putting the dishwasher at the end of the counter, because we figured the top of the machine would look like a run-of-the-mill home appliance like a washer or dryer, rather than the monstrosity that it actually is. It is ugly. I think I actually recall my wife crying when she saw it, and not in a good way. Since then my loosely held plan has been finding a way to move or dispose of the contents of one section of our cabinets, then cut a section out of said cabinets big enough for the dishwasher to fit underneath. Recently, however, thanks in large part to your podcast, I have developed enough confidence in my woodworking skills to attempt a different idea. My thought is to make what is essentially an end cap or sidewall, which will match the existing cabinetry, anchor it somehow, and then place a new section of countertop between this end cap and the existing end cap of the cabinets. I would essentially be "extending" the countertop, thereby concealing top and visible side of the dishwasher. From what I can tell, all I would have to make, stain, and finish would be a cabinet side panel, a piece of trim to run along the bottom, and a partial face frame. So here come the questions: do you think this is doable, either generally or the way I am thinking? And what…
Not rated yetBowed Front Drawers, Planer Snipe, Going Pro and MORE!!!
· 50 min
This Episodes Questions: Brian's Questions: My neighbor gave me a beautiful maple root ball that is approximately 3' in diameter about 6 months ago. I am currently letting it dry for another 12 to 24 months. I'm thinking of eventually rough cutting it with a large reciprocating saw. The wood will be used for small boxes or knife handles. Am I crazy? Do you have any advice on dry times and using root wood? George Guy, I am making a bow front dresser and plan to use Blum Blumotion undermount slides for the drawers. However, I’m not sure how I should attach the front of the slide to the bottom of the draw, since the draw front will be curved. Any suggestions would be greatly appreciated. Also, the draws will be inset, but since the blumotion has a fair amount of flexibility (up/down and left/right) I am thinking aligning the draw fronts should be doable. But do you have any suggestions to make it as simple as possible? Finally I see Rockler has a “JIG IT” under mount drilling guide. Do you use this jig and do you recommend it? Thanks so much!!! Mike Guy's Questions: I live in Fishers, IN and am new to woodworking and was wondering how to find good places for hardwoods? It’s been pretty tough to find anything local without driving a decent distance to a mill on the west side of town. Chayse Bell I’m preparing to build a set of kitchen cupboards from white oak. The style will be Mission, with some Frank Lloyd Wright Prairies Style touches. I have several questions. How much planer snipe is too much? I have a Dewalt 13” model 735 benchtop planer. If I take a short board—say, two feet—and run it through once taking a 1/16 cut, I get 8/1000ths snipe. Is this to be expected? …or should I look at getting my planer serviced or maybe trading up. (The Laguna Tools PX16 planer looks amazing, but six times the money.) Darrin Huy's Questions: Thank you all for what you do. Like so many other woodworkers, I have accumulated quite a bit of wood through my own purchases and also from inheriting my fathers wood collection after he passed away. I would like to move it out of my two car garage workshop to free up space, and am considering building some sort of dry storage box to store it under a deck in my backyard. (I don’t have room for a large lumber shed). Thinking roughly 14 foot by 4 foot by 4 foot. This box would obviously be exposed to the weather as the deck is not sealed. What are your thoughts on this? And if you were to build this box, would you seal it relatively airtight or would you simply stack the lumber off the ground and put a piece of tin or something over the top to allow airflow. In the second example, I worry about snow, rain and bugs getting access to the lumber. Thanks in advance for your response. Eric in Lincoln Nebraska Hey gentleman, first of all, thank you for the amazing podcast and the fluff-free format. I’ve been a hobbyist woodworker for about 6 years and I’m at the point where I’m considering turning my hobby into a side job of sorts. My question is: in your opinion, what separates an amateur woodworker from a professional woodworker? Are there certain skills, techniques, or projects you learned that really elevated your confidence or status in the craft? Thanks again, and keep up the awesome content! Adrien from Toronto (Canada)
Not rated yetPlaner Snipe, Workshop Temperature, Grain Popping and MORE!!!
· 40 min
This Episodes Questions: Brian's Questions: I’m preparing to build a set of kitchen cupboards from white oak. The style will be Mission, with some Frank Lloyd Wright Prairies Style touches. I have several questions. I have a question about milling lumber. There seems to be a trade-off: keep the boards long and you need to joint more off to get a flat face, hence the risk of falling below your desired thickness. But cut the boards to length first and you have to allow for more cut-offs on the ends to remove planer snipe. How should I think about this? In general, do the three of you cut longer boards to length for parts first and then plane and joint? Or do you joint and plane the boards whole (mine are 6’ to 8’) and take the perhaps larger losses to thickness but avoid multiple areas of planer snipe? I know that much depends on the boards, but I'd be interested in your general approaches. Darrin Hey guys I absolutely love the podcast, amd have already learned a lot. I recently have decided to do this for more than a hobby. I have been doing small or easier projects like cutting boards and tongue and groove ceilings. I have been wanting to start building entry level tables and furniture but keep psyching myself out of it. How did you guys build up the confidence to move on to more advanced projects? And did you guys get discouraged or frustrated at the beginning? Thank you David Caraway Guy's Questions: Thank you all for such a great show! I'm an amateur woodworker working out of a 550 square foot two-car attached garage. We keep two cars in the garage, so all my equipment is on mobile bases. My question has to do with shop climate control. I live in southern Indiana, with hot muggy summers and cool-to-cold winters. The garage is insulated, including the door, and sits under a conditioned bonus room, but the garage itself is not heated or cooled. Although it never freezes, for a few of the coldest winter weeks, it will be in upper 30s. Mostly it's at least 45 degrees. I'm contemplating installing a 1 ton/12,000BTU mini-split for heating and cooling, DIYing installing it for less than $1000. I'm trying to decide if it's worth it, basically for the few hottest and coldest weeks. I can also migrate easily to my unfinished basement in the coldest weeks for glue-ups and finishing. I wouldn't want to run the mini-split all the time, and often I am only out in the shop for short bursts, so pre-heating or pre-cooling seems wasteful. $1000, plus the energy to run the mini-split, could buy plenty of other woodworking equipment and supplies. If this were your shop, what would you do? Thanks, Kyle Kramer Always a pleasure listening to your podcast. Thank you for your knowledge and insight. I am planning to rip the carpet off my Stairs treads and somehow get a relative match to my wood flooring either upstairs and downstairs. Assuming the exact color isnt important in my question. The treads are likely just pine but I haven't pulled the carpet yet to find out. My thought was to veneer the treads. Then I would most likely us a transtint dye to reach the color and finish off with shellac washout and water based poly for durable finish. Is this a good approach or destined for failure? Thanks for your time. Josh Huy's Questions: Thanks for the great podcast. I have learned a lot from all the great content you put out. I really appreciate your advice and perspective. I have a couple questions I was hoping you could answer. My second question is about compositing saw dust. My wife likes to garden and keep a compost pile. We use saw dust and wood shaving to balance the moisture of the compost pile. I occasionally use MDF and plywood and I am wondering if all the bad stuff in those materials are bad to use in the compost. I guess I'm pretty sure they are not good. I've heard that most of those chemicals breakdown form the heat of the compost but I am skeptical of that. I use an oneida dust separator. Do you think it is worth…
Not rated yet