Skip to main content
AmigoFish

Well, So Much for Quitting | WoodTalk 581

From Wood Talk | Woodworking · · 1 hr 19 min

This plays from the publisher's own server. We do not host a copy.

Open at the source

Not rated yet

Description

It’s show #581 - On today’s show, we’re talking about…making stains suck less, cutting angled tenons, and what to do with all that ash? PLUS we have a new sponsor of the show!

Sponsored by You

If you want to help support the show, you can do so by going to Patreon.com/woodtalk (http://www.patreon.com/woodtalk) and signing up to become a patron of the show.

What's on the Bench

- Marc is building with epoxy!

- Shannon is finishing with a ketchup packet.

- Matt is finishing up kitchen stuff and still sawing stuff too.

Kickback

- Joe reaches back out to us to say his hand plane issues were because of the "friggin' frog" in the wrong place.

- Andy wants to tell us about a new modeling software at Layout.computer (https://layout.computer/) that was designed for chair makers but has now added a casework component too.

- Brandon offers the advice of putting an air filter outboard of the intake on his dehumidifier and what a difference it has made.

- Andrew calls in to share his surgeon father's advice about being cut with a dull tool or sharp tool, spoiler alert, "flappy bits" is a technical term.

New Sponsor - Woodcraft

We reminisce about our early Woodcraft store experiences and the classes we have taken there. We are thrilled to be a part of that journey for other woodworkers and look forward to working with Woodcraft.

Listener Questions

- David wants to know why stains suck so much and we try to tell him they don't...and fail. Marc suggests making a blotch control (https://thewoodwhisperer.com/videos/make-stains-look-better-diy-blotch-prevention-formula/) to help with stain absorption.

- Steve looks for advice on making angled tenons for a chair using power tools. Angled mortise or angled tenon?

- Paul has several Ash logs that were killed by the Ash Borer (https://www.lumberupdate.com/103-emerald-ash-borer/) and asks for advice on what to do with them.

- Steve is taking a trip to Japan and wants to know some woodworking related stuff to see. We don't know but want to know so are asking the audience for advice. Write/call in and tell us your suggestions.

Ask Us a Question

Send in questions via the contact form here on site or hit us up on IG at woodtalkshow (http://www.instagam.com/woodtalkshow) or send us a voicemail using your phone voice memo app to woodtalkshow@gmail.com

Finally you can find us individually on Instagram at mattcremona (http://www.instagram.com/mattcremona), woodwhisperer (http://www.instagram.com/woodwhisperer), and renaissancewoodworker (http://www.instagram.com/renaissancewoodworker)

Hosted on Acast. See acast.com/privacy (https://acast.com/privacy) for more information.

Back to Wood Talk | Woodworking · Report a problem