No new videos since December 2019.
About this show
A YouTube channel. Its newest videos are listed below.
Videos come from the channel's public YouTube feed. The artwork is the newest video thumbnail. Last updated . Names, artwork and text belong to their publishers.
Cosmos
Videos
Short block turning
· 19 sec
Not rated yetCimbria engine test run
· 52 sec
Not rated yet- Not rated yet
- Not rated yet
Mofoco 2165 Outlaw Street Engine
· 1 min
This is Brad Baltzer's 2165 complete engine with hydraulic lifters and Weber dual 44 IDF's, the exhaust is our test exhaust.
Not rated yetMofoco Cylinder heads at the foundry 2
· 1 min
Here the head is cooling, the operator is using air to make sure there is no liquid aluminum left. Then the head must be carefully removed from the mold and checked for any short fill.
Not rated yetMofoco Cylinder Heads at the foundry 1
· 1 min
Here you can see the molten aluminum being poured into the mold. Each head is made one at a time.
Not rated yetMofoco Cylinder Head Machining 3
· 1 min
This shows the head being machined on the rocker stand, the tops of the valve guide bosses and the intake face.
Not rated yetMofoco Cylinder Head Machining 2
· 4 min
This shows the combustion chamber being machined and also the head stud holes being drilled.
Not rated yetMofoco Cylinder Head Machining
· 2 min
This shows a raw cylinder head casting being machined for the spring seats and the valve guide holes
Not rated yetMatty G and Eddie Spaghetti from the Supersuckers
· 3 min
This is a show at Sabbatic in Milwaukee, WI. They are singing Pretty Fucked Up
Not rated yet