Skip to main content
AmigoFish

How Engineers Spent a Century Solving the Clutch

From New Mind · · 28 min

The player loads from YouTube only when you click. It uses YouTube's privacy-enhanced mode.

If the video does not play, the owner may have turned off embedding. Watch it on YouTube instead.

Watch on YouTube

Not rated yet

Description

▶️ Thanks to Storyblocks for sponsoring this video. Get a limited-time discount, only available through this link: http://storyblocks.com/newmind

This video traces the evolution of the automotive clutch, from leather belts to modern hypercar transmissions.

THE FIRST CLUTCH • 1870: Marcus's cart needed its wheels lifted off the ground to start. • 1886: Benz adapted factory belt-and-pulley slippage to the Patent-Motorwagen. • Leather belts stretched when wet and shrank when dry. • Belts glazed under heat and snapped at their laced joints. • Drivers dressed belts with beef tallow, cod liver oil, or castor oil and resin.

CLUTCH CONES • Tapered geometry wedged spring force outward to multiply clamping pressure. • A 9.6° cone angle increased torque capacity sixfold over a flat surface. • Practical angles stayed between 12–15° to avoid jamming on release. • Leather bands were oiled with neatsfoot oil to soften the violent bite. • Stored cars often had a stick wedged under the pedal to prevent bonding.

MULTI-PLATE CLUTCHES • Stacked thin discs scaled torque capacity without growing in diameter. • Hele-Shaw's 1905 design used oil film viscous drag instead of friction. • 80% of cars at the 1907 Paris Motor Show used Hele-Shaw clutches. • The 1908 Itala Grand Prix car ran a 64-plate Hele-Shaw unit. • William Morris ran cork inserts in oil to keep them from catching fire. • Bugatti's 1924 Type 35 used a wet multi-plate and won over 1,000 races. • Wet multi-plates remain the standard inside modern motorcycle gearboxes.

THE SINGLE-PLATE DRY CLUTCH • Ferodo introduced asbestos friction linings around 1908. • Asbestos resisted heat shock without glazing, melting, or disintegrating. • Borg & Beck patented the single-plate dry clutch in Moline, Illinois in 1910. • Their first contract saved the Jeffery Quad army truck from cancellation. • 85% of UK clutches were Borg & Beck units by 1956. • Ferodo's first non-asbestos pads arrived in 1979. • Replacements used aramid, ceramic, glass, and semi-metallic blends.

THE DIAPHRAGM SPRING CLUTCH • Replaced coil spring rings with a single Belleville-style conical disc. • Slotted fingers acted as integrated release levers. • Non-linear load curve sharply reduced pedal effort past peak compression. • Geometry self-compensated for friction disc wear over time. • Immune to the centrifugal bowing that distorted coil springs. • GM fitted an early version to Chevrolets from 1938. • LuK commercialised the modern design in 1965 on the VW 1600.

THE AUTOMATED MANUAL • US automatics outsold manuals by the end of the 1950s. • The Saxomat used a centrifugal clutch and a vacuum servo from 1955. • VW's 1968 Autostick paired the Saxomat concept with a torque converter. • Ferrari's 1989 640 introduced the first paddle-shifted F1 gearbox. • The design was driven by aerodynamics, not shift speed. • The 1997 Ferrari 355 F1 was the first paddle-shifted production car. • Single-clutch shifts felt jerky due to unavoidable throttle cuts.

THE DUAL-CLUTCH TRANSMISSION • Adolphe Kégresse patented the dual-clutch concept in 1935. • The 1961 Hillman Minx Easidrive was the first production DCT. • Porsche developed PDK from 1981 to fight turbo lag in Group C racing. • A 962 with PDK won its debut race at Monza in 1986. • VW's 2003 DSG used two concentric wet multi-plate packs. • DSG handover shifts complete in under 200 milliseconds. • The 2005 Bugatti Veyron used a 7-speed DCT to handle 1,001 hp. • LuK's 2008 dry DQ200 sacrificed torque capacity for efficiency. • Koenigsegg's Jesko uses seven clutches across multiple shafts for nine ratios.

THE RETURN OF THE DOG CLUTCH • AWD EVs waste range dragging unpowered motors as generators. • Toothed dog clutches engage with zero slip and zero drag. • Electric motors act as their own synchronisers before the teeth mesh. • Modern systems reconnect in as little as 20 milliseconds. • Magnetic latching draws no power once engaged. • Disconnecting one axle recovers 10–20% of driving range.…

Back to New Mind · Report a problem