Skip to main content
AmigoFish

Level 2 Jeff

Level 2 JeffVideo

Format:
YouTube channel
New videos:
Irregular
Typical length:
about 15 minutes, not counting Shorts
Latest video:
Not rated yet

About this show

Jeff Geerling's second second channel. It's gonna be wild.

Videos come from the channel's public YouTube feed. The artwork is the newest video thumbnail. Last updated . Names, artwork and text belong to their publishers.

Cosmos

Similar by topic and creator

See the full Cosmos

Videos

  • I used to use a Raspberry Pi for this. Not anymore.

    · 8 min

    The AUX-2 costs $69 in the US, and €59 in Europe. Read more about the AUX-2 on Home Assistant's blog: https://www.home-assistant.io/blog/2026/11/11/no-device-left-behind-home-assistant-connect-aux-2/ And here is a link to their launch livestream: https://www.youtube.com/watch?v=YpcrIy5f774 Support me on Patreon: https://www.patreon.com/geerlingguy Sponsor me on GitHub: https://github.com/sponsors/geerlingguy Merch: https://www.redshirtjeff.com 2nd Channel: https://www.youtube.com/@GeerlingEngineering 3rd Channel: https://www.youtube.com/@Level2Jeff Contents: 00:00 - Pi costs too much 00:42 - ESP32 to the rescue 01:11 - Home Assistant AUX-2 02:50 - USB port for Z-Wave and Zigbee 03:22 - What's the Matter? 04:16 - Thread not yet 05:28 - AUX-2 Teardown 07:18 - $69 in the US

    Not rated yet
  • How is Ubiquiti selling this for $99?

    · 15 min

    Thanks to your comments, I found a great value air quality monitor that runs on PoE power... at least, if you run UniFi! Mentioned in the video: - Vape Detection & Air Quality Sensor: https://store.ui.com/us/en/products/up-airquality - YouTube video on $35 cheap Amazon Air Quality Detector: https://www.youtube.com/watch?v=t5yAZb5Blbs Support me on Patreon: https://www.patreon.com/geerlingguy Sponsor me on GitHub: https://github.com/sponsors/geerlingguy Merch: https://www.redshirtjeff.com 2nd Channel: https://www.youtube.com/@GeerlingEngineering 3rd Channel: https://www.youtube.com/@Level2Jeff Contents: 00:00 - UP-AirQuality 01:40 - The breath test 03:35 - It's real, and real good 05:02 - Teardown 09:14 - A fancy sensor package 11:44 - Design notes 12:47 - Reassembly and re-test 14:45 - Recommended (if you have Ubiquiti)

    Not rated yet
  • They built a phone company for one weekend

    · 13 min

    ShadyTel builds an entire mid-90s central telephone exchange, runs it for three days, and tears it down. Every year. I talked to them about their equipment and a new TDM frequency reference setup this year at VCF Midwest. Some of the things I mentioned in the video: - VCF Midwest: https://vcfmw.org - ShadyTel: https://shady.tel - MichaelWasHere blog post on VCF Network: https://www.michaelwashere.net/post/2026-09-14-vcfmw/ - MichaelWasHere blog post on VCF Frequency Reference: https://www.michaelwashere.net/post/2026-09-17-vcfmw-time/ - VCF Midwest 21 Telephone Information and Stats: www.dms-100.net/computers/VCFMW/21/ Support me on Patreon: https://www.patreon.com/geerlingguy Sponsor me on GitHub: https://github.com/sponsors/geerlingguy Merch: https://www.redshirtjeff.com Main Channel: https://www.youtube.com/@JeffGeerling 2nd Channel: https://www.youtube.com/@GeerlingEngineering Contents: 00:00 - This is ShadyTel 00:42 - Frequency reference and T1 lines 03:52 - Physical cabling and copper pairs 04:45 - The full telco equipment stack 07:29 - Talking Clock 08:18 - DSLAM and wireless signals 09:12 - Custom NIDs 10:39 - More about the T1 frequency strata 13:06 - Digging deeper and TDM demo at VCFMW20

    Not rated yet
  • I found Apple's prototype ANS 300 server at VCF Midwest

    · 3 min

    At VCF Midwest, I found a rarely-seen prototype of the rackmount Apple Network Server 300, which was axed by Steve Jobs and Gil Amelio in 1997. Thanks to @Mr.Macintosh for telling me more about it! Here are links to the resources I mentioned in this video: - Mr. Macintosh's YouTube channel: https://www.youtube.com/@Mr.Macintosh - Prototype ROMs and Mac OS support for ANS: https://oldvcr.blogspot.com/2026/01/hands-on-with-two-apple-network-server.html - Applefritter's ANS 300 Article: https://www.applefritter.com/node/539 Support me on Patreon: https://www.patreon.com/geerlingguy Sponsor me on GitHub: https://github.com/sponsors/geerlingguy Merch: https://www.redshirtjeff.com Main Channel: https://www.youtube.com/@JeffGeerling 2nd Channel: https://www.youtube.com/@GeerlingEngineering

    Not rated yet
  • I replaced my UPS's proprietary card with open source firmware

    · 4 min

    An alternative to APC's proprietary network card to keep your UPS humming. Or, well, hopefully not *humming*... just providing good, clean power to your racks. Resources mentioned in this video: - OpenNMC on Crowd Supply: https://www.crowdsupply.com/netcube-systems-austria/opennmc - OpenNMC Docs: https://opennmc.readthedocs.io/en/latest/ - NetCube Systems Austria: https://netcubesystems.at Support me on Patreon: https://www.patreon.com/geerlingguy Sponsor me on GitHub: https://github.com/sponsors/geerlingguy Merch: https://www.redshirtjeff.com Main Channel: https://www.youtube.com/@JeffGeerling 2nd Channel: https://www.youtube.com/@GeerlingEngineering Contents: 00:00 - Why an open NMC 01:57 - Swapping out NMCs 02:21 - First login and firmware updates 03:05 - NUT and better power graphs

    Not rated yet
  • How does a $35 monitor have more sensors than a $200 one?

    · 13 min

    How can a $30 Air Quality Monitor have more sensors inside than a $200 one? Spoiler: it doesn't. - Air Quality Detector: https://amzn.to/4x3BZLN - Partycle: https://partycle.cloud - AirGradient Go: https://www.airgradient.com/portable/ - Air Lab: https://networkedartifacts.com/airlab Support me on Patreon: https://www.patreon.com/geerlingguy Sponsor me on GitHub: https://github.com/sponsors/geerlingguy Merch: https://www.redshirtjeff.com 2nd Channel: https://www.youtube.com/@GeerlingEngineering 3rd Channel: https://www.youtube.com/@Level2Jeff Contents: 00:00 - How is this thing so cheap 02:06 - Testing sensor accuracy 04:10 - A teardown reveals the secret 06:03 - At least it has a decent PM sensor 08:39 - Not a CO2 sensor 09:39 - The peel 11:09 - AK23 is cheap

    Not rated yet
  • Why do people like this store so much?

    · 54 min

    What's it like in the flagship Micro Center? Why is impossible to leave empty-handed? Patrick from @ServeTheHomeVideo and I took a tour of almost every aisle to find out. Thanks to Micro Center for sponsorhing my trip to their Columbus, OH store! Check them out at https://www.microcenter.com Support me on Patreon: https://www.patreon.com/geerlingguy Sponsor me on GitHub: https://github.com/sponsors/geerlingguy Merch: https://www.redshirtjeff.com 2nd Channel: https://www.youtube.com/@GeerlingEngineering 3rd Channel: https://www.youtube.com/@Level2Jeff Contents: 00:00 - The newest Micro Center 00:47 - Electronics and Maker 03:22 - RF, SDR, Robotics 04:45 - Test gear and more electronics 07:01 - AI workstations 08:06 - A chess-playing robot 08:56 - Laptops and desktops 09:52 - 3D Printerland 13:49 - Networking gear 14:52 - More Printing 15:52 - IoT aisle 16:33 - BNC and cleaning tools 17:17 - Speakers and more speakers 18:21 - Desk mats and so many headphones 19:37 - Content creation gear 20:56 - Laptop batteries and docking stations 21:22 - Toys and LEGOs 22:16 - Tools and cables 25:47 - More tools 26:43 - More networking gear 28:34 - Raspberry Pi 30:00 - Tablets and accessories 30:26 - Flash storage 32:58 - A 200-dollar busy button 33:34 - UPSes, power, and more cables 35:46 - Cable organization 36:23 - Maclock 36:40 - Keyboards, Mice, and Racing Sims 32:22 - Gaming and DIY PC with GPUs 40:36 - Motherboards and CPUs 42:33 - Air Cooling, NASes, Liquid cooling 44:51 - Power Supplies 46:01 - PC Cases and PCIe cards 51:17 - Rackmount server cases 51:40 - Two Bawls 53:18 - Tastes like a colonoscopy

    Not rated yet
  • The Steam Deck's Screen Now Works on a Raspberry Pi

    · 18 min

    You can use the Steam Deck's touchscreen LCD with a Raspberry Pi thanks to this HAT. Thanks to Scandent for open sourcing their design and code to make this work! Mentioned in this video: - Steam Deck LCD Pi TV070WXM-HAT: https://github.com/ScandentLLC/tv070wxm-hat - Steam Deck LCD Display (eBay): https://www.ebay.com/itm/155825171547 - Steam Deck LCD Display (Alibaba): https://www.alibaba.com/product-detail/TV070WXM-TV1-BOE-7-Inch-800_1601672786487.html - Guide for Recompiling the Pi Linux Kernel: https://www.raspberrypi.com/documentation/computers/linux_kernel.html Support me on Patreon: https://www.patreon.com/geerlingguy Sponsor me on GitHub: https://github.com/sponsors/geerlingguy Merch: https://www.redshirtjeff.com 2nd Channel: https://www.youtube.com/@GeerlingEngineering 3rd Channel: https://www.youtube.com/@Level2Jeff Contents: 00:00 - A HAT for the Steam Deck LCD 02:27 - First prototype damaged in shipping 03:53 - Mounting the Pi to the LCD 07:54 - A Linux kernel driver for the Steam Deck LCD 12:28 - Debugging my Linux kernel rebuild 15:05 - First light and demo 17:25 - Your own Stream Deck

    Not rated yet
  • Now you can build your own Raspberry Pi factory

    · 17 min

    Raspberry Pi sent me a little piece of a Pi Factory—a CM5 Programming Jig! You can buy one too; they're $600. Not that many people watching this will ever need one, especially considering CM5 pricing lately due to DRAM price shenanigans :( It's interesting nonetheless, so watch as I try using it with a couple of my CM5s! See more about the Jig: https://www.raspberrypi.com/products/cm5-programming-jig/ Support me on Patreon: https://www.patreon.com/geerlingguy Sponsor me on GitHub: https://github.com/sponsors/geerlingguy Merch: https://www.redshirtjeff.com 2nd Channel: https://www.youtube.com/@GeerlingEngineering 3rd Channel: https://www.youtube.com/@Level2Jeff Contents: 00:00 - The problem with flashing lots of SBCs 03:01 - Raspberry Pi CM5 Programming Jig 04:24 - The CM5 Flash Jig alternate 05:04 - Accessories and basic overview 05:50 - Who is it for 06:51 - Gettin Jiggy with it 10:07 - Generating a custom Pi OS image 11:57 - Configuring the Jig 12:56 - Flashing a CM5 14:33 - If at first you don't succeed... 15:12 - Pi Production Pipeline

    Not rated yet
  • FINALLY! Proxmox officially supports Arm (but not Raspberry Pi)

    · 10 min

    Here's the official Proxmox Forum Post about ARM64 Support: https://forum.proxmox.com/threads/proxmox-virtual-environment-now-available-for-64-bit-arm-arm64.185527/ Support me on Patreon: https://www.patreon.com/geerlingguy Sponsor me on GitHub: https://github.com/sponsors/geerlingguy Merch: https://www.redshirtjeff.com Main Channel: https://www.youtube.com/@JeffGeerling 2nd Channel: https://www.youtube.com/@GeerlingEngineering Contents: 00:00 - Proxmox on Arm64 01:18 - Just trying to boot my workstation 03:09 - Booting into Proxmox installer 04:41 - Exploring Proxmox on Arm 06:07 - Creating my first Proxmox Arm64 VM 07:03 - Can't quite finish the Ubuntu install 08:33 - PCIe Passthrough and hardware compatibility

    Not rated yet
  • I can set up a computer without touching it

    · 5 min

    I ran into TechxArtisan at Open Sauce, and they had these neat little adapters. They provided me with a nano and plus version, and I've been testing them while managing some of the computers at my Studio. Very handy in a pinch. Since they provided the two demo units I tested, I'm marking this video as "sponsored", but to be clear: they have never paid me to say anything nor have any input into the content of this video. See my sponsorship policies: https://github.com/geerlingguy/youtube#sponsorships Check out the KeyMod on Openterface's site: https://shop.techxartisan.com/products/keymod And documentation for the KeyMod: https://docs.openterface.com/products/keymod/ It looks like it will be sold through CrowdSupply: Support me on Patreon: https://www.patreon.com/geerlingguy Sponsor me on GitHub: https://github.com/sponsors/geerlingguy Merch: https://www.redshirtjeff.com Main Channel: https://www.youtube.com/@JeffGeerling 2nd Channel: https://www.youtube.com/@GeerlingEngineering

    Not rated yet
  • Things have escalated...

    · 34 min

    I finally have three watches. But I still can't tell time. The equipment I used in this video (some links are affiliate links): - Robins Tools Pixel Pump 2: https://robins-tools.com - TAPR GUS (GNSS Antenna Splitter): https://tapr.org/product/gus-gnss-antenna-splitter/ - Vevitts 850W Electric Hot Plate: https://amzn.to/4fnfQBQ - Chip Quik SMDLTLFP Low Temp Solder Paste: https://amzn.to/4yElwih - Andonstar AD249S-M 4K Digital Microscope: https://amzn.to/4fILNn5 - Weller WES51 Soldering Station: https://amzn.to/4pOAMW4 - Weller Precision Soldering Tips for WES51: https://amzn.to/4pIitlb - 0603+0805 SMD Cap Resistor LED Diode component book: https://amzn.to/4fxSd8s - Kester '44' Solder Wire: https://amzn.to/4vQXAWs - Hakko CHP PN-2007 Long-Nose Pliers: https://amzn.to/4pGtkw5 - Essmetuin Precision Tweezers: https://amzn.to/45nyGCW - Diamond Flux FN231: https://amzn.to/45vRcsI - TOPDON TC004 Thermal Camera: https://amzn.to/45oOgya (If I missed something, let me know in a comment!) Some of the other videos and resources I referenced: - My Open Sauce video about having the 'best time': https://www.youtube.com/watch?v=ziPIbxoFc_g - PPS Watch on Instructables: https://www.instructables.com/PPS-Watch-the-Most-Accurate-Watch-That-Doesnt-Tell/ - Nanofix (great channel with soldering tips): https://www.youtube.com/@nanofixca Support me on Patreon: https://www.patreon.com/geerlingguy Sponsor me on GitHub: https://github.com/sponsors/geerlingguy Merch: https://www.redshirtjeff.com Main Channel: https://www.youtube.com/@JeffGeerling 2nd Channel: https://www.youtube.com/@GeerlingEngineering Contents: 00:00 - Back from Open Sauce, need more watches 04:02 - Neat KiCAD features 05:01 - Solder Paste application, first PCB 05:51 - Placing components by tweezer 09:15 - There might be bridges 09:48 - Hot Plate Reflow, first PCB 14:12 - Time for Rework 18:13 - First boot of the first PCB 19:58 - Switching to low-temp Solder Paste 21:54 - Placing components with Pixel Pump 2 25:06 - Hot Plate Reflow, second PCB 28:08 - Oops 30:38 - First boot of the second PCB 31:34 - Things have escalated

    Not rated yet
  • Now I can tell time.

    · 1 min

    I made Sean Hodgins' PPS Watch. Then I made another. And another. Now I can tell what time it is. Sorta. See how to make your own GNSS PPS Watch on Instructables: https://www.instructables.com/PPS-Watch-the-Most-Accurate-Watch-That-Doesnt-Tell/ Support me on Patreon: https://www.patreon.com/geerlingguy Sponsor me on GitHub: https://github.com/sponsors/geerlingguy Merch: https://www.redshirtjeff.com Main Channel: https://www.youtube.com/@JeffGeerling 2nd Channel: https://www.youtube.com/@GeerlingEngineering

    Not rated yet
  • I pay $200/month for this.

    · 4 min

    Internet outages are getting to be a regular occurrence. Too regular. Blog post with guide for setting up a backup Internet WAN2 connection in OPNsense: http://www.jeffgeerling.com/blog/2026/opnsense-backup-internet-gateway/ Support me on Patreon: https://www.patreon.com/geerlingguy Sponsor me on GitHub: https://github.com/sponsors/geerlingguy Merch: https://www.redshirtjeff.com Main Channel: https://www.youtube.com/@JeffGeerling 2nd Channel: https://www.youtube.com/@GeerlingEngineering

    Not rated yet
  • I Know Nothing About CNC, so Sean Hodgins is Fixing That

    · 34 min

    Sean helped me machine a small part on his CNC while I was up in Canada. I asked him for tips for my first time milling a part. Here's our full conversation. See the main channel video where I try learning CNC and CAM: https://www.youtube.com/watch?v=DJ6dWOVZh2k Sean's channel: https://www.youtube.com/@SeanHodgins Support me on Patreon: https://www.patreon.com/geerlingguy Sponsor me on GitHub: https://github.com/sponsors/geerlingguy Merch: https://www.redshirtjeff.com Main Channel: https://www.youtube.com/@JeffGeerling 2nd Channel: https://www.youtube.com/@GeerlingEngineering Contents: 00:00 - Welcome to the shop 00:59 - Preparing Aluminum stock 02:45 - Setting up the Tormach 05:05 - Preparing the job 07:00 - The first cut is not the deepest 10:49 - Chip clearing 12:27 - Hovering over the e-stop 14:08 - The C is for PreCision 12:21 - Topside done 19:43 - Bottom start 20:56 - The doors and the Fusion license 23:37 - Clamping with precision 26:20 - Bottom side done 27:01 - Questions from a CNC Noob 28:33 - What's the most important thing 29:26 - Desktop CNC and manual milling 32:41 - Sean Hodgins and the M.O.R.E. Token

    Not rated yet
  • Rendering on Arm Linux is faster, cheaper (and possible now)

    · 4 min

    SideFX added Arm Linux support to Houdini 22 as a 'Technology Preview'. It's not meant for full production workflows quite yet. But I'm guessing people will flock to Arm pretty quickly if they can realize time and cost savings for compute! Thanks to SideFX for reaching out and letting me play with early preview builds before launching Houdini 22; if you're interested, read more here: https://www.sidefx.com The video also has a brief clip from this neat VFX reel from Outpost VFX, worth a watch if you want to see a modern compositing/rendering workflow: https://www.youtube.com/watch?v=gHsHgDMeYwc Support me on Patreon: https://www.patreon.com/geerlingguy Sponsor me on GitHub: https://github.com/sponsors/geerlingguy Merch: https://www.redshirtjeff.com 3rd Channel: https://www.youtube.com/@JeffGeerling 2nd Channel: https://www.youtube.com/@GeerlingEngineering

    Not rated yet
  • Telstra had a REALLY bad time last week

    · 5 min

    Telstra (sorry for the mispronunciation, I always read it 'Telestra' lol) had a terrible time last week. In fact, they were temporarily 20 years behind the times! Why did this happen, and how could they have avoided it? Let's take a quick look into timing history to find out. - Information Age Article: https://ia.acs.org.au/article/2026/telstra-outage-blamed-on-known-bug-in-obsolete-server.html - Guardian Article: https://www.theguardian.com/business/2026/jul/10/telstra-ceo-deeply-sorry-for-outage-and-admits-risk-of-time-keeping-failure-was-known-ntwnfb - Financial Review Article: https://www.afr.com/companies/telecommunications/trains-halted-as-telstra-mobile-outage-sweeps-nation-20260708-p60dik - Discussion of GPS 1024 week rollover bug on the Time Nuts mailing list: https://febo.com/pipermail/time-nuts_lists.febo.com/2026-July/110851.html Support me on Patreon: https://www.patreon.com/geerlingguy Sponsor me on GitHub: https://github.com/sponsors/geerlingguy Merch: https://www.redshirtjeff.com Main Channel: https://www.youtube.com/@JeffGeerling 2nd Channel: https://www.youtube.com/@GeerlingEngineering

    Not rated yet
  • The UPS was dead, and now my Internet's dead

    · 15 min

    The CyberPower is dead. So I replaced it. And now my Internet is dead. And Open Sauce is this week, I need the Internet dangit! Mentioned in this video (some links are affiliate links): - CyberPower CP1500PFCRM2U 2U Rackmount UPS: https://amzn.to/3SUndYI - ExpertPower 12V 9AH Batteries: https://amzn.to/4aPM1qQ - Tripp-Lite Eaton SMART1500LCDXNC 2U Rackmount UPS: https://amzn.to/3TgZtxU - Rack Studs: https://amzn.to/4vt2icC - Star Case Cage Nut Insertion Tool: https://amzn.to/4wEBRSg Support me on Patreon: https://www.patreon.com/geerlingguy Sponsor me on GitHub: https://github.com/sponsors/geerlingguy Merch: https://www.redshirtjeff.com 2nd Channel: https://www.youtube.com/@GeerlingEngineering 3rd Channel: https://www.youtube.com/@Level2Jeff Contents: 00:00 - Dead 00:41 - Out with the old 02:20 - In with the new 05:39 - I have the power 07:04 - Testing the old batteries 08:04 - Replacing the old batteries 09:58 - New batteries in old UPS 12:22 - My future self thanks me 13:25 - When it rains it pours

    Not rated yet
  • My Mikrotik died. So I switched to... QNAP?!

    · 12 min

    There's never a good day for your old switch to die. Here are all the things I mentioned in this video, in order of appearance: - QNAP 16-port 10G Switch QSW-M3216R-8S8T: https://amzn.to/3QIdN1P - QNAP 10-port PoE++ 10G 2.5G Switch QSW-M2106PR-2S2T: https://amzn.to/3QL3KsN - QNAP Dual Rackmount Kit SP-EAR-QSW2FOR1-01: https://amzn.to/3RlCKjK - MikroTik 8-port 10G CRS309-1G-8S+in Switch: https://amzn.to/4eYejk8 - Star Case Cage Nut insertion tool: https://amzn.to/4h0NAG8 - RackStuds: https://amzn.to/4p7spED Note: Some QNAP gear is out of stock at Amazon right now; if that's the case, look elsewhere to find it at MSRP instead of paying scalper pricing for it. As an Amazon Associate I earn from qualifying purchases. Support me on Patreon: https://www.patreon.com/geerlingguy Sponsor me on GitHub: https://github.com/sponsors/geerlingguy Merch: https://www.redshirtjeff.com Main Channel: https://www.youtube.com/@JeffGeerling 2nd Channel: https://www.youtube.com/@GeerlingEngineering Contents: 00:00 - Dead Switch 02:14 - QNAP Replacements 05:16 - Out with the old 05:56 - In with the new 07:41 - Plugging back in 09:03 - Power on Switch Test

    Not rated yet
  • Every mini rack needs a mini UPS

    · 9 min

    Everybody needs a mini UPS in their mini racks. Here are the ones I've been using the most: - Project MINI RACK: https://mini-rack.jeffgeerling.com/ - APC Back-UPS BE425M: https://amzn.to/4vdUBqI - GoalZero Sherpa 100 AC: https://amzn.to/40tUb3r - ECOFLOW River 2: https://amzn.to/4y72dxW - ECOFLOW River 3+: https://amzn.to/4yluRvs - Vertiv Liebert PowerUPS 100: https://amzn.to/4vN9wsz - Tripp-Lite BC600R: https://amzn.to/3WnvQdg - APC Back-UPS Slim BV400XU: https://amzn.to/3ZO1QbV - Werewolf VFLEX USB-C Power Adapters: https://werewolf.us/collections/werewolf-products/products/vflex-3-pack-starter-kit - Tupavco TP1713 Mini Rack PDU: https://amzn.to/41JChus - Sabrent VOLTIK USB-C Charging Station: https://amzn.to/4vYHiLO As an Amazon Associate I earn from qualifying purchases. Support me on Patreon: https://www.patreon.com/geerlingguy Sponsor me on GitHub: https://github.com/sponsors/geerlingguy Merch: https://www.redshirtjeff.com Main Channel: https://www.youtube.com/@JeffGeerling 2nd Channel: https://www.youtube.com/@GeerlingEngineering Contents: 00:00 - TODO 01:00 - APC Back-UPS 450 01:54 - Goal Zero Sherpa 100 AC 02:52 - ECOFLOW River 2 and River 3 Plus 03:48 - Vertiv Liebert PowerUPS 100 04:40 - Tripp-Lite BC600R 05:54 - APC Back-UPS Slim BV400XU 06:26 - The ideal mini UPS 07:04 - An option for USB-C PD to anything 07:57 - PDU options

    Not rated yet

More in Technology

See all Technology shows