Skip to main content
AmigoFish

FIRST CLASS AMATEUR

FIRST CLASS AMATEURVideo

Format:
YouTube channel
New videos:
Irregular
Typical length:
about 4 minutes, not counting Shorts
Latest video:
Not rated yet

About this show

Modern Guide to Knots

Covers: knots, practical knot tying, camping gear, machining, backpacks, shoelace knots, DIY projects, rope work

Videos come from the channel's public YouTube feed. The artwork is the newest video thumbnail. Last updated . Names, artwork and text belong to their publishers.

Recently on this show

Summary of recent videos, drawn from the publisher's feed.

This video channel teaches practical knots and rope work, from truck-bed tie-downs to camping and gear hacks. Recent videos cover a one-handed truck hitch that locks itself, a trefoil release sling, a one-way tarp tensioner, and using a stopper knot to retrieve a backpack.

Report a problem with this summary

Cosmos

Similar by topic and creator

See the full Cosmos

Similar shows

See all How-To and DIY shows

Videos

  • I Made ROPE Out of Dental Floss

    · 1 min

    I built a mini rope-making machine that turns ordinary dental floss into surprisingly strong rope. Subscribe for more rope tricks, knots, tools and unusual DIY builds. #shorts #diy #ropemaking #dentalfloss

    Not rated yet
  • How to Tighten a Rope After Both Ends Are Tied

    · 42 sec

    Both ends are already tied—but the rope is still loose. This three-part crown setup uses the extra rope in the middle to create a simple pulley system and tension the line. I use it here to hang a hammock. Subscribe for more useful knots, rope tricks and DIY solutions. #shorts #knots #ropetricks #hammock #camping

    Not rated yet
  • This Knot Cinches Down an Entire Stack

    · 40 sec

    A diamond knot and compression toggle create an adjustable rope system that cinches these boxes together tight. No buckles or hardware required. Subscribe for more useful knots, rope tricks and DIY solutions. #shorts #knots #ropetricks #paracord #diy

    Not rated yet
  • This Braid Turns Into a Rope Tensioner

    · 1 min

    Turn a simple three-strand braid into an adjustable toggle for tensioning a guyline—no hardware needed. Subscribe for more useful knots, rope tricks and DIY solutions. #shorts #knots #paracord #ropetricks #camping

    Not rated yet
  • Turn Shock Cord Into a Bracelet

    · 54 sec

    Turn a simple piece of shock cord into a clean, stretchy bracelet with no buckle. The ends are fused together using instant bond adhesive for a nearly seamless finish. Subscribe for more useful knots, rope tricks and DIY ideas. #shorts #shockcord #bracelet #DIY #ropetricks

    Not rated yet
  • CLEAN Buckle Attachment Looks Factory Made

    · 1 min

    Here’s a simple knot for attaching a plastic buckle to webbing or tactical gear without leaving a sloppy-looking attachment. Clean, secure, and easy to tie. Subscribe for more useful knots, rope tricks and DIY solutions. #shorts #knots #tacticalgear #paracord

    Not rated yet
  • This Paracord Ring Has NO Seam

    · 56 sec

    I made a seamless ring from paracord—no buckle and no visible connection. Subscribe for more paracord projects, knots and DIY ideas. #shorts #paracord #knots

    Not rated yet
  • This Rope Trick Makes Heavy Loads Easy

    · 37 sec

    A simple rope trick for moving heavy loads. Subscribe for more useful knots, rope tricks and DIY solutions. #shorts #knots #ropetricks

    Not rated yet
  • I Built a Rope-Making Machine… Out of DENTAL FLOSS

    · 8 min

    I built a miniature rope-making machine — laser-cut wood and bent wire — and ran dental floss through it. Yes, it actually makes rope. support my channel at https://awesomeforsale.com I wanted to see if I could turn ordinary dental floss into actual rope, so I built a tiny rope-making machine from laser-cut wood and a few pieces of bent wire. The machine twists multiple strands of dental floss together to create a surprisingly strong miniature rope. After making a roll of it, I put it to a practical test by using the finished rope to hang a picture frame. It’s a simple little machine, but it demonstrates the same basic principle used to turn individual fibers and strands into much stronger rope. Sometimes the smallest projects are the most fun to build. #diy #ropemaking #maker

    Not rated yet
  • Tighten ANY Rope That's Already Tied — Without Untying It [3-Part Crown]

    · 8 min

    Your rope is tied at both ends and it's sagging — here's how to tension it without untying a single knot. This three-part crown trick builds a pulley right into the line. support my channel at https://awesomeforsale.com What do you do when a rope is already tied off at both ends—but you still need to make it tighter? In this video, I show a simple way to tension a rope directly from the middle without untying either end. I create a rope pulley system using a three-part crown, giving me the mechanical advantage needed to pull the line tight. To put the system to a real-world test, I use the tensioned rope to hang a hammock between two trees. This technique could be useful anytime you need to take slack out of an existing rope setup without access to—or without wanting to disturb—the anchor points. In this video: • Tensioning a rope from the middle • Three-part crown • Creating mechanical advantage with rope • Blackwall hitch • Tightening a line without untying the ends • Hammock setup and real-world test If you enjoy knots, paracord projects, rope tricks, DIY tools, and finding new ways to solve everyday problems, consider subscribing to First Class Amateur. #knots #ropetricks #bushcraft

    Not rated yet
  • The Box-Carrying Knot That Adjusts to ANY Size [Carrier Knot]

    · 8 min

    One knot turns any rope into an adjustable box carrier — it cinches down on any size box, with no hardware needed. support my channel at https://awesomeforsale.com In this video, I show you how to turn a piece of paracord into an adjustable box carrier that can secure multiple boxes together. The system uses a sliding toggle and a diamond knot to create tension around the boxes. The best part is that you can tighten everything up without untying and retying your knots. I demonstrate it using five small boxes, but the same idea can be adapted for bundling, carrying, and securing all kinds of awkward loads. Simple knots. Simple materials. Surprisingly useful. #knots #paracord #diy

    Not rated yet
  • This Braid DOUBLES as a Rope Tensioner [Single-Strand Braid]

    · 7 min

    This single-strand braid isn't just a braid — flip it around and it becomes a working rope tensioner for tarps, guylines, and hammocks. support my channel at https://awesomeforsale.com You probably know how to make a basic three-strand braid—but did you know that same simple braid can be turned into an adjustable tensioning system? In this video, I show you a different way to use a three-strand braid with a single piece of rope. The result can slide along the line to quickly adjust tension, then grip when the line is pulled tight. It’s a simple idea with some surprisingly useful applications for tent guylines, tarps, camping, securing gear, and anywhere you need an easily adjustable line. Sometimes the most useful rope tricks are hiding inside techniques you already know. #knots #ropetricks #camping

    Not rated yet
  • I Made a Bracelet From Shock Cord — With ONE Knot [No Hardware]

    · 5 min

    A clean shock-cord bracelet with fused ends and zero hardware — one knot does all the work. support my channel at https://awesomeforsale.com In this video, I show you how to make a single-strand shock cord bracelet using stretchy rubber shock cord. This is a simple bracelet design that stretches over your hand, so there’s no buckle or traditional clasp needed. I’ll show you how to tie the decorative section and how I connect the two ends using instant bond adhesive and accelerator to create a clean, low-profile connection. This is a quick project and a fun alternative to a traditional paracord bracelet. If you enjoy knots, paracord projects, DIY gear, fabrication, and figuring out new ways to make things, subscribe to First Class Amateur for more projects. #paracord #diy #edc

    Not rated yet
  • I Turned a V-Belt Into a Paracord Pack Handle — It Holds HOW Much?

    · 8 min

    A worn V-belt plus paracord becomes a heavy-duty pack handle. I built it, then load-tested it — here's how much it held. support my channel at https://awesomeforsale.com In this video, I show you how I made a heavy-duty paracord handle for a military training pack, also known as a butt pack. Instead of using paracord alone, I use a V-belt as the core to give the handle strength, shape, and a comfortable grip. The handle is wrapped using alternating half hitches, and I also show a clean, unique way to attach snap buckles to each end without leaving an ugly knot. This technique can be adapted for backpacks, tool bags, gear bags, cases, and other DIY paracord projects. If you enjoy practical DIY projects, knots, fabrication, and finding new uses for everyday materials, subscribe to First Class Amateur for more. #paracord #diy #maker

    Not rated yet
  • How to Make a Paracord Ring Without a Knot

    · 4 min

    In this video, I’ll show you how to make a Micro Seam Paracord Ring using a simple technique that creates a clean, low-profile connection without a bulky knot. One end of the paracord is inverted to create a smooth finished edge, while the other end is threaded inside to form the ring. The result is a simple paracord ring with a surprisingly clean seam. This same technique can be adapted for other paracord projects where you want to join the ends without a traditional knot. #Paracord #ParacordProjects #DIY #ParacordRing #FirstClassAmateur

    Not rated yet
  • Working Alone? Use Rope as Your Third Hand

    · 8 min

    Support my channel at https://awesomeforsale.com Sometimes you don’t need another person—you just need a piece of rope. In this video, I show three simple ways I use rope as a “third hand” when working alone. I use it to help mount a heavy tire onto a hub, hold rectangular tubing in position for welding, and make an adjustable hoist to support a bumper while measuring and fabricating a bracket. These aren’t complicated knots or elaborate rigging systems. They’re practical ways to use rope to hold, lift, position, and adjust heavy or awkward objects when you could really use an extra set of hands. A little rope, some basic knots, and a little creativity can make a one-person job a whole lot easier. #RopeTricks #DIY #WorkingAlone #Paracord #GarageTips #Fabrication #FirstClassAmateur

    Not rated yet
  • Aluminum-Core Paracord Handle

    · 6 min

    Support my channel at https://awesomeforsale.com In this video, I upgrade the carry handle on my rucksack by combining paracord with a custom aluminum insert. The aluminum gives the handle structure and helps it hold its shape, while the paracord provides a comfortable grip and a clean, rugged look. I’ll show you how I made the aluminum insert, attached it to the rucksack frame, and wrapped it with paracord to create a solid custom handle. It’s a simple modification, but it makes a big difference when grabbing, moving, or carrying the pack. If you enjoy DIY gear modifications, paracord projects, homemade tools, and figuring out better ways to make things, subscribe for more projects from First Class Amateur. #Paracord #Rucksack #DIY #ParacordProjects #GearMods #DIYGear

    Not rated yet
  • This $2 DIY Tool Makes Paracord Lacing 10x Easier

    · 4 min

    Stop fighting your lacing — this $2 DIY tool pulls paracord through tight spots in seconds. Support my channel at https://awesomeforsale.com I made this simple wire rope-working tool from scratch using steel wire and a wooden handle. Tools like this are commonly used for splicing and working with rope, but I had a different job in mind. I needed a way to guide paracord around the frame of a rucksack, especially through spots that were difficult to reach by hand. This homemade tool turned out to be the perfect solution. In this video, I show how I formed the wire, made the handle, assembled the tool, and then put it to work on the rucksack. Sometimes the simplest homemade tools end up being the most useful. #paracord #diy #tools

    Not rated yet
  • GOLF BALL FIRE PISTON

    · 8 min

    I built a homemade fire piston from aluminum and golf balls—then finished it off with a reflective paracord braid to give it a completely custom look. Support my channel at https://awesomeforsale.com A fire piston creates an ember using nothing but rapid air compression. In this video, I show how I made the piston, how the golf balls became part of the design, how I added the reflective paracord, and most importantly… whether it actually works. 🔥 Aluminum fire piston ⛳ Golf ball handles 🪢 Reflective paracord braid 🔥 Char cloth tinder This was a fun build combining machining, paracord work, and a fire-starting method that’s been around for generations. #diy #maker #tools

    Not rated yet
  • ROPE RAMP for a full Cooler

    · 4 min

    Support my channel at, https://awesomeforsale.com Someone commented on my last video, “Try that with a cooler full of ice and pop.” Challenge accepted. In the original test, the cooler weighed about 50 pounds. This time I loaded it up to 142 pounds to see if my homemade rope ramp could still get it into the bed of my truck. No fancy loading equipment—just rope, a few knots, and a simple idea. Will the rope ramp handle nearly three times the weight? Watch the test and see what happens. If you have another challenge for one of my homemade rope tools, leave it in the comments. I might try yours next! #RopeTools #DIY #RopeRamp #TruckHacks #Cooler #HomemadeTools

    Not rated yet