Skip to main content
AmigoFish

Are cheap smoke machine pumps serviceable?

From bigclivedotcom · · 7 min

The player loads from YouTube only when you click. It uses YouTube's privacy-enhanced mode.

If the video does not play, the owner may have turned off embedding. Watch it on YouTube instead.

Watch on YouTube

Not rated yet

Description

Having taken the cheap smoke machine apart, I wondered how serviceable the little solenoid pump was.

It turns out that it's a very standard design with equally standard sizes. This means that it has good serviceability if needed.

By far the most common problems I see in these pumps are failure of the little O-ring that seals the moving plunger, and breaking of the spring or valve inside the plunger itself. The O-ring is usually a standard size - 4mm internal diameter, 1mm core diameter and 6mm outside diameter (often described as 6*1). If the internal valve breaks it's new-pump time. But if it's the spring that breaks where it's attached to the valve then you can sometimes fold up the last turn of the spring to make a new hook for the valve.

These pumps are fairly cheap online. Typically about £10.

If you need to change the o-ring in your pump then they are sold as part of some small kits on AliExpress. They refer to this size as 6*1 or 6mm outer diameter by 1mm rubber diameter. Here's a handy affiliate link to spare kits. The smaller kit has the 6*1 size:- https://s.click.aliexpress.com/e/_c4eSH0N7

If you enjoy my videos, you can treat me to coffee, cookies and gadgets by supporting the channel on Patreon. You also get early access to videos without adverts, bonus footage and regular quiet Patreon live streams.

https://www.patreon.com/bigclive

Alternatively, for a single coffee contribution you can use PayPal:- https://www.paypal.com/paypalme/bigclive

#ElectronicsCreators

Back to bigclivedotcom · Report a problem